ARA LPD-1011 antenna - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

KashanAS
 Post subject: Stacked Patch array design !!
Posted: Thu Mar 31, 2011 5:51 am 
 
Lieutenant

Joined: Wed Mar 30, 2011 12:12 pm

Posts: 1

Location: Sweden

Hi,

I am having some problem in the definition of the layers in ADS momentum. When i defined two substrate layers with same dielectric constant otherwise when i used slight different value then it will take the two layers

Here is my stacked patch design layers.

This is my design in ADS momentum with different dielectric constant. Can anyone have idea whats the correct procedure to define the layers in ADS momentum?

Image

Also i want to analyse my patch array in phi 45°. Is there anyway to tilt the plane 45° in ADS. Or what i have to do for this?

Attachments are the alaysis of my design on MATLAB.

Image

Image

Thanks a lot and i am waiting for the reply

BR,

Kashan Ali

MS(Wireless and Photonics)

Sweden

Posted  11/12/2012