wccheng Post subject: Mentor Expedition PCB --> PowerPCB Posted:
Wed Nov 09, 2005 1:34 am Captain Joined: Tue Nov 08,
2005 10:13 pm Posts: 8 Dear all, Could anyone advice me
that what format could I export in the Mentor Expedition PCB software?
So, I could import it into the PowerPCB software? I have tried to export
the PCB in the Expedition software in .asc (ASCII) format and import
it in the PowerPCB. I found that there are some parts is missing shown
in the PowerPCB compared with the Expedition shown. Moreover, some parts
should be flood in the Expeditoin shown. There are not flood in the
PowerPCB. Therefore, could anyone suggest me to have a better export
format file in the Expedition. So, I could import it into the PowerPCB
and without so much error. Thanks wccheng
Posted 11/12/2012
|