Electronics World articles Popular Electronics articles QST articles Radio & TV News articles Radio-Craft articles Radio-Electronics articles Short Wave Craft articles Wireless World articles Google Search of RF Cafe website Sitemap Electronics Equations Mathematics Equations Equations physics Manufacturers & distributors Engineer Jobs LinkedIn Crosswords Engineering Humor Kirt's Cogitations Engineering Event Calendar RF Engineering Quizzes USAF radar shop Notable Quotes App Notes Calculators Education Engineering Magazines Engineering magazine articles Engineering software Engineering smorgasbord RF Cafe Archives RF Cascade Workbook 2018 RF Stencils for Visio RF & EE Shapes for Word Advertising RF Cafe Homepage Sudoku puzzles Thank you for visiting RF Cafe!
Innovative Power Products Combiners / Dividers

Applications Engineer needed! - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Sequoia Communications
Post subject: Applications Engineer needed! Posted: Fri Jun 13, 2008 8:07 pm


Joined: Thu Mar 06, 2008 4:17 pm
Posts: 2
Location: San Diego, CA
Sequoia Communications, one of California's Best Places to work for 2007, is looking for a Senior RF Applications Engineer to join our team!! If you are interested please email

Senior RF Applications Engineer

Job Description

Sequoia seeks an experienced “phone level” RF applications engineer to provide lab testing and optimization of Sequoia RF transceiver products.

This individual will be responsible for

-Identifying and solving integration issues.
-Design and analysis of board level RF circuits
-Measuring the reference board performance and analyzing the results.
-Creating and maintaining supporting documentation [Datasheets, app. notes etc].
-Interfacing to the design team to explain board level issues.


-Minimum of 5 years experience in RF/Wireless applications and/or design.
-Experience with GSM/EDGE and WCDMA cellular standards.
-Experience with ATE usage and some Vee/Labview coding.
-Strong lab and board skills.
-Strong interpersonal skills.
-BS or greater in electronic engineering

Desired skills

-Willingness to travel domestically and internationally.
-Familiarity for ADS, Momentum and PCB design Tools.
-Strong skills in Vee coding for ATEs highly desirable.
-Good Technical writing ability.
-Working knowledge of power amplifiers, filters, and other related components.

Posted  11/12/2012
Qorvo / Custom MMIC Eliminating Mixup over Mixers - RF Cafe withwave microwave devices - RF Cafe
Windfreak Technologies Berkeley Nucleonics Academy - RF Cafe
About RF Cafe
Kirt Blattenberger - RF Cafe Webmaster
Copyright: 1996 - 2024
    Kirt Blattenberger,

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while typing up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:  AirplanesAndRockets.com


Please Support RF Cafe by purchasing my  ridiculously low−priced products, all of which I created.

These Are Available for Free