Attn: RF MEMS & NEMS Test & Design Engineers for San - RF Cafe Forums

RF Cafe Forums closed its virtual doors in 2010 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2010, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts.

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

Kirt Blattenberger

Post subject: Attn: RF MEMS & NEMS Test & Design Engineers for San Posted: Mon Aug 13, 2007 12:24 pm

Site Admin

Joined: Sun Aug 03, 2003 2:02 pm

Posts: 308

Location: Erie, PA

Greetings:

Here is an opportunity that does not come along often. Sand 9, in Boston, MA, is looking for a couple engineers with MEMS and/or NEMS expertise. This is a ground-floor opportunity for the right people. Both design and test engineers are being sought. Please take a look at the job descriptions here:

Thanks for taking time to check this out.

_________________

- Kirt Blattenberger

RF Cafe Progenitor & Webmaster

Posted 11/12/2012


Please Support RF Cafe by purchasing my ridiculously low−priced products, all of which I created. RF Cascade Workbook for Excel RF & Electronics Symbols for Visio RF & Electronics Symbols for Office RF & Electronics Stencils for Visio RF Workbench (shareware) T-Shirts, Mugs, Cups, Ball Caps, Mouse Pads These Are Available for Free Calculator Workbook Smith Chart™ for Excel

About RF Cafe Copyright: 1996 - 2024 Webmaster: Kirt Blattenberger, BSEE - KB3UON RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived... All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged. My Hobby Website: AirplanesAndRockets.com