Electronics World articles Popular Electronics articles QST articles Radio & TV News articles Radio-Craft articles Radio-Electronics articles Short Wave Craft articles Wireless World articles Google Search of RF Cafe website Sitemap Electronics Equations Mathematics Equations Equations physics Manufacturers & distributors Engineer Jobs LinkedIn Crosswords Engineering Humor Kirt's Cogitations RF Engineering Quizzes Notable Quotes Calculators Education Engineering Magazine Articles Engineering software RF Cafe Archives RF Cascade Workbook 2018 RF Symbols for Visio - Word Advertising RF Cafe Forums Magazine Sponsor RF Cafe RF Electronics Symbols for Visio RF Electronics Symbols for Office Word RF Electronics Stencils for Visio Sponsor Links Saturday Evening Post NEETS EW Radar Handbook Microwave Museum About RF Cafe Aegis Power Systems Anritsu Alliance Test Equipment Amplifier Solutions Anatech Electronics Axiom Test Equipment Berkeley Nucleonics Bittele Centric RF Conduct RF Copper Mountain Technologies Empower RF everything RF Exodus Advanced Communications Innovative Power Products ISOTEC KR Filters Lotus Systems PCB Directory Rigol RF Superstore San Francisco Circuits Reactel RFCT TotalTemp Technologies Triad RF Systems Windfreak Technologies Withwave LadyBug Technologies Wireless Telecom Group Sponsorship Rates RF Cafe Software Resources Vintage Magazines Thank you for visiting RF Cafe!
RF Electronics Shapes, Stencils for Office, Visio by RF Cafe

Harris Corp - RF Design Engineer - Tech Lead - Rochester, NY - RF Cafe Forums

RF Cafe Forums closed its virtual doors in 2010 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2010, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts.

NOTICE: The original RF Cafe Forum is available again for reading, and the new RF Cafe Blog is an active board.

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

traciwright2008
 
 Post subject: Harris Corp - RF Design Engineer - Tech Lead - Rochester, NY
Posted: Mon Sep 20, 2010 4:53 pm 
 
Lieutenant
 

Joined: Thu Sep 09, 2010 1:39 pm

Posts: 1

I am currently searching for an experienced technical leader in the area of RF board level design for a new product opportunity!

Please contact me (Traci Wright) if you think this might be a fit for you.

All responses/inquiries for this opening can be sent to my attention at traci.wright@harris.com and please reference that you noticed our posting courtesy of RF Café! We want to know where our best and brightest engineers go to for the latest news and information.

Please no inquiries from third party agents.

Harris RF Communications is the leading global supplier of secure radio communications and embedded high-grade encryption solutions for military, government and commercial organizations and a leading supplier of assured communications systems and equipment for public safety, utility and transportation markets, with products ranging from the most advanced IP voice and data networks to portable and mobile single- and multiband radios.


RF Design Engineer, New Product Development– Technical Lead – Rochester, NY – RFCD10091034

In this role as a RF Design Engineer you will be utilized as a Subject Matter Expert and Technical Lead for a group of engineers working on the new product development in our expanding high volume military markets. You will be responsible for the design of the RF portion of this product in the RF Electronic Warfare (EW) below 10 GHz.

• Responsible for the logical and systematic conversion of customer or product requirements into total RF hardware solutions that acknowledge technical, schedule, and cost constraints

• Responsible for designing, developing, modifying and evaluating analog electronic parts, components, or integrated circuitry for electronic equipment such as EW or other hardware systems

• Responsible for hardware system integration, participation in peer reviews and identifying, tracking and repairing defects

• Determines design approaches and parameters

• Analyzes electrical requirements to determine feasibility of design within time and cost constraints

• Analyzes equipment to establish operating data conducts experimental tests and evaluates results

• Selects components and equipment based on analysis of specifications and reliability

• May also review vendor capability to support development

• Will be a senior member of a cross functional development team with hands on responsibility for the design and support of receiver, synthesizer and power amplifier hardware from the definition of requirements through the integration and testing of the completed product

Qualifications:

• BSEE required, MSEE highly desired.

• 15 years experience with the development of RF circuitry is required including some experience with the following: AGC, phased-lock loops, RF & IF chains, frequency converters, mixers, filters, microstrip, and stripline, modeling and analysis of RF circuits/subsystems using commercially available software. Also should include subsystem analysis capabilities to include: Dynamic Range, IMD, gain distributions, leakage rejection, thermal drift, and component specification generation. Experience should include involvement in recent technology shifts from analog to digital.

• 10 years detailed experience with RF analog development and test equipment including Arbitrary Waveform Generators, Vector Signal Generators, Spectrum Analyzers, O-Scopes, etc.

• 5 years experience leading small product development teams and mentoring other engineers is required

Preferred Additional Skills:

• Experience with High Frequency radio systems

• Knowledge of electrical safety and EMC standards and principles. (MIL-STD-461 standards.)

• Familiarity with Agilent Genesys, electromagnetic simulation, and Matlab., tools

• Ability to able to communicate advanced technical concepts clearly, and work closely with system stakeholders, customers, executive management and technical peers, to ensure compliance with system design requirements.

• Excellent written and oral communication skills, and be able to work in an integrated product team environment.

• Working knowledge of RF receiver and/or jammer subsystems and functional relationships between subsystems.

• Experience programming experience including embedded software (FPGA/VHDL highly desired).

• Past experience with RF sections of electronic warfare/countermeasures highly desirable

• Application of design considerations for volume production is desired

• 15 years experience programming experience including embedded software required (FPGA/VHDL highly desired).

• An active Secret U.S. Security Clearance (preferred) OR the ability to obtain.

Please be aware that many of our positions require a security clearance, or the ability to obtain one. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your résumé for this position, you understand and agree that Harris Corporation may share your résumé, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

You may view this position and many others at http://www.employment.harris.com

For more information on our products and services http://www.rfcomm.harris.com/

A special thanks to Kirt and his team at RF Cafe for continuing to provide career opportunities to the RF community. :smt038

Traci Wright, Senior Technical Recruiter, Harris Talent Management Center

Posted  11/12/2012

Amplifier Solutions Corporation (ASC) - RF Cafe
everythingRF RF & Microwave Parts Database - RF Cafe
Berkeley Nucleonics Corporation - RF Cafe
Anritsu Test Equipment - RF Cafe

Please Support RF Cafe by purchasing my  ridiculously low−priced products, all of which I created.

These Are Available for Free

 

About RF Cafe

Kirt Blattenberger - RF Cafe Webmaster

Copyright: 1996 - 2024

Webmaster:

    Kirt Blattenberger,

    BSEE - KB3UON

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website:

AirplanesAndRockets.com