RF/EE Engineer position in Seattle, WA - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

jeaninewallner

Post subject: RF/EE Engineer position in Seattle, WA

Unread postPosted: Wed Jul 21, 2004 2:45 pm

Offline

Lieutenant

Joined: Wed Jul 21, 2004 2:39 pm

Posts: 1

Location: Seattle, WA

https://www.cococorp.com

As our RF Engineer you will join a growing engineering effort to develop and deliver our First Responder Communications System. This position is committed to hands-on product development as well as the design and development of new applications that provide total solutions for core CoCo products. The RF team is in charge of wireless, microwave, land-mobile, and marine-mobile radios; software-defined radio; and ultra wideband radio design/implementation for CoCo infrastructure and products. The RF team supports the deployment team by providing site surveys, which determine optimal physical placement of CoCo equipment, as well as managing performance tuning, demo support, and consulting with other teams on wireless and radio issues. The RF/EE will also handle integrating RF equipment from various vendors--including land mobile radios (LMR) and WiFi radios--with the CoCo network.

Requirements for the position include:

• Practical knowledge of all major wireless telecommunication air-interface standards including GSM, TDMA, CDMA IS-95, iDEN, EDGE, UMTS, and CDMA-2000

• Practical knowledge of the radio vendors and handheld units commonly used in government agencies, including a familiarity with the pros/cons of the most popular systems(/li>

• Experience with RF design applications and systems for the following standards: 802.11, APCO P25, Passport, TETRA or MPT-1352 trunked radio, and Motorola trunking standards such as SmartNet and SmartOne

• At least five years' experience with analog and digital circuit design

• Ability to design and prototype radio interface hardware, including knowledge of circuit design and some PCB layout, with soldering technique being essential

• Knowledge of subcontract vendors for outsourcing the above-mentioned technologies is preferred

• Software experience in C/C++, firmware design, or assembly is preferred

• Ability and willingness to travel throughout the United States and to international destinations

US Citizenship is required for this position.

Interested candidates should send their resume to jeanine at cococorp.com

Top

Profile

Guest

Post subject:

Unread postPosted: Thu Oct 28, 2004 10:35 pm

Do you offer Internship or CO-OP ?

Shahid

Posted  11/12/2012