Skyworks Solutions seeking Product Engineer for Cedar Rapids - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

dbunting
 Post subject: Skyworks Solutions seeking Product Engineer for Cedar Rapids
Posted: Tue Feb 22, 2011 10:42 am 
 
Captain

Joined: Mon Feb 21, 2011 7:24 pm

Posts: 6

As a Senior Product Engineer, you will focus on GSM PA and FEM products. Responsibilities include ATE and Characterization bench setup and testing, data analysis, and interfacing with Quality Engineering and Failure Analysis. This position includes responsibility for both development and sustaining activities, and includes limited travel.

BSEE or equivalent with strong exposure to RF parameters. Candidate should have a good understanding of RF parameters, and the ability to debug hardware issues, such as on ATE or bench characterization equipment.

deb.bunting@skyworksinc.com for more information

Posted  11/12/2012