Staff MEMS Design and Characterization Engineer - RFMD - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster
Kirt Blattenberger
 Post subject: Staff MEMS Design and Characterization Engineer - RFMD
Posted: Thu Mar 08, 2012 4:48 pm 
 
Site Admin
User avatar

Joined: Sun Aug 03, 2003 2:02 pm

Posts: 308

Location: Erie, PA

Image

Posted 1-19-2012

Staff MEMS Design and Characterization Engineer

This position will be a key contributor to the timely and successful introduction of RF MEMS Technology

•Lead the RF and DC characterization of various MEMS technologies

•Develop/establish/verify switch cycle testing capability including cold and hot switching

•Interact with technology partners and give critical feedback on characterization findings

•Interact with design to ensure proper function and high performance operation of the overall system

•Design devices for various RF MEMS technologies as provided by technology partners

The qualified candidate would have:

•5+ years of MEMS technology development

•Past participation in successful MEMS technology introductions to volume manufacture

•Depth in RF and DC characterization of high performance MEMS technologies

•Familiarity with programming (Visual Basic, LabView, MatLab) for instrument control

•Knowledge and experience with MEMS process and design integration

•RF MEMS technology development/design/characterization

•Statistical analysis and methods

•Adept with semiconductor layout tools (Cadence, Mentor, L-Edit, etc.)

•MEMS simulation and design

Please contact traci.wright@rfmd.com with your resume and more information about you!

_________________

- Kirt Blattenberger :smt024

RF Cafe Progenitor & Webmaster

Posted  11/12/2012