Motors and other equipment for sale - RF Cafe Forums

RF Cafe Forums closed its virtual doors in late 2012 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2012, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts. Here is the full original RF Cafe Forums on Archive.org

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

mmaassel
 Post subject: Motors and other equipment for sale
Posted: Mon Jul 09, 2007 9:23 am 
 
General
User avatar

Joined: Mon Apr 10, 2006 12:43 pm
Posts: 53
Good day.

I have several used motors and values for sale. If I found any information
about the equipment I included a website. Buyer will pay shipping.

===== Motors =======
Universal Electric Company
Model Number: JB2P021N#
115/230 V
075/0.40 A
1425/1675 RPM

Superior Electric (https://www.electrosales.com)
Model Number: M091-FD09
1.7 V
4.7 A
110 oz. In
200 steps/revolution

Superior Electric (https://www.electrosales.com)
Model Number: M061-FD-6135
5V
1A
Hold 53 oz in
200 steps/revolution

Oriental Motor (https://www.orientalmotor.com)
Model Number: 4RJ20GB-AUL
17W, 100 V, 50 Hz, 0.47A, 7 uF, 1200 RPM
19W, 100 V, 60 Hz, 0.51A, 7 uF, 1450 RPM
20W, 115 V, 60 Hz, 0.48A, 6 uF, 1500 RPM

Oriental Motor Gearhead (attached to the above motor)
Model Number: 4GB60KA

Bodine Electric Company (https://www.electrosales.com)
Model Number: NSH-12R
115V
0.33A
DC
1/50 HP
1730 RPM
4.2 lb-in

North American Philips Company
Model Number: K82954-M1
14 V
27 ohms/coil
7.5 step angle

A.W. Hayden (quantity of 2)
20 V
2 W
0 - 320 PPS
0 - 3 1/3 RPM

Astrosyn (Miniangle Stepper) (https://www.astrosyn.com)
Model Number: 34PM-CO49
2.7 V/phase
4.7 A/phase
18 degrees/step

Unknown manufacturer
5060-6608 is stamped on the motor
Length: 1.5 inches
Diameter: 1 inch

===== Values =====
Automatic Switch Company (ASCO) (https://www.ascovalue.com)
Model Number: 826409
110V
50/60 Hz
13.8 W

Bimba (https://www.bimba.com)
Model Number: None printed on the unit
Length: 3.75 inches
Diameter: 0.75 inches

Skinner Electric Values
Model Number: B40XA
120 V
7 W
150 PSI
1/32 Orifice

Gould Allied Control
Model Number BB31682

Arrow-Hart
Model Number ARC22OVZOQT

Pittman (https://www.pittmannet.com)
Model Number 69-2253-2623
24 VDC

===== Relays =====
Potter & Brumfield
SSR-240D-25R
Quantity of 2

===== EMI Filter =====
Corcom
Model Number F2010
115/230 V
50-60 Hz
20 A

===== Misc =====
HP Pressure Meter
Model Number: 0101-0356 (I am not sure about this)
Scale Reading: 0-30 PSI or 0 - 2.0 kg/cm^2


If you do not like my price, feel free to make me a counter offer.

Thank you and have a good day.
Michael
 
   
 
mmaassel
 Post subject:
Posted: Mon Jul 09, 2007 3:28 pm 
 
General
User avatar

Joined: Mon Apr 10, 2006 12:43 pm
Posts: 53
Good day. I just realized that I did not include any prices.

If I found any information about the equipment I included a website.

Buyer will pay shipping.

===== Motors =======
Universal Electric Company $10.00
Model Number: JB2P021N#
115/230 V
075/0.40 A
1425/1675 RPM

Superior Electric (https://www.electrosales.com) $25.00
Model Number: M091-FD09
1.7 V
4.7 A
110 oz. In
200 steps/revolution

Superior Electric (https://www.electrosales.com) $25.00
Model Number: M061-FD-6135
5V
1A
Hold 53 oz in
200 steps/revolution

Oriental Motor (https://www.orientalmotor.com) $15.00
Model Number: 4RJ20GB-AUL
17W, 100 V, 50 Hz, 0.47A, 7 uF, 1200 RPM
19W, 100 V, 60 Hz, 0.51A, 7 uF, 1450 RPM
20W, 115 V, 60 Hz, 0.48A, 6 uF, 1500 RPM

Oriental Motor Gearhead (attached to the above motor)
Model Number: 4GB60KA

Bodine Electric Company (https://www.electrosales.com) $25.00
Model Number: NSH-12R
115V
0.33A
DC
1/50 HP
1730 RPM
4.2 lb-in

North American Philips Company $10.00
Model Number: K82954-M1
14 V
27 ohms/coil
7.5 step angle

A.W. Hayden (quantity of 2) $10.00 each
20 V
2 W
0 - 320 PPS
0 - 3 1/3 RPM

Astrosyn (Miniangle Stepper) (https://www.astrosyn.com) $25.00
Model Number: 34PM-CO49
2.7 V/phase
4.7 A/phase
18 degrees/step

Unknown manufacturer $1.00 each
5060-6608 is stamped on the motor
Length: 1.5 inches
Diameter: 1 inch

===== Values =====
Automatic Switch Company (ASCO) (https://www.ascovalue.com) $5.00
Model Number: 826409
110V
50/60 Hz
13.8 W

Bimba (https://www.bimba.com) $1.00 each
Model Number: None printed on the unit
Length: 3.75 inches
Diameter: 0.75 inches
Quantity of 2

Skinner Electric Values $2.00
Model Number: B40XA
120 V
7 W
150 PSI
1/32 Orifice

Gould Allied Control $2.00
Model Number BB31682

Arrow-Hart $2.00
Model Number ARC22OVZOQT

Pittman (https://www.pittmannet.com) $2.00
Model Number 69-2253-2623
24 VDC

===== Relays =====
Potter & Brumfield $2.00
SSR-240D-25R
Quantity of 2

===== EMI Filter =====
Corcom $5.00
Model Number F2010
115/230 V
50-60 Hz
20 A

===== Misc =====
HP Pressure Meter $1.00
Model Number: 0101-0356 (I am not sure about this)
Scale Reading: 0-30 PSI or 0 - 2.0 kg/cm^2


If you do not like my price, feel free to make me a counter offer.

Thank you and have a good day.
Michael
 
   
 
omni
 Post subject:
Posted: Fri Aug 03, 2007 1:06 pm 
 
Lieutenant

Joined: Fri Aug 03, 2007 12:42 pm
Posts: 3
Hi,

I'm interested in the following:

Bodine Electric Company (https://www.electrosales.com) $25.00
Model Number: NSH-12R
115V
0.33A
DC
1/50 HP
1730 RPM
4.2 lb-in

but don't know how to contact you as PM has been disabled on the board.

Thanks.... Omni
 
   
 
mmaassel
 Post subject: Motors and other equipment for sale
Posted: Mon Aug 06, 2007 9:30 am 
 
General
User avatar

Joined: Mon Apr 10, 2006 12:43 pm
Posts: 53
Good day Omni.

I have two of the Bodine motors. I am asking $25.00 per motor and you would pay for shipping. Normally I ship UPS, but I am willing to ship however you want.

You can contact me directly at amateurnd@aol.com

Michael
 
   
 
omni
 Post subject:
Posted: Mon Aug 06, 2007 2:32 pm 
 
Lieutenant

Joined: Fri Aug 03, 2007 12:42 pm
Posts: 3
Michael,

I've sent you email re: the Bodine electric motors.

Thanks.

Omni
 
   
 
omni
 Post subject:
Posted: Fri Aug 24, 2007 12:09 pm 
 
Lieutenant

Joined: Fri Aug 03, 2007 12:42 pm
Posts: 3
Bodine motors were perfect and exactly as described.

Thanks again...

Omni
 
   
 
mmaassel
 Post subject:
Posted: Fri Oct 05, 2007 10:39 am 
 
General
User avatar

Joined: Mon Apr 10, 2006 12:43 pm
Posts: 53
All of the motors and other items have been sold.

Have a good day.
 
   
 
A+ Machine
 Post subject: m091-fd09
Posted: Fri Jun 06, 2008 2:23 pm 
 
Lieutenant

Joined: Fri Jun 06, 2008 2:17 pm
Posts: 1
I am interested in buying the M091-FD09 motor.
Do you still have it for sale?
How many do you have?

Thanks A+
 
   
 
mmaassel
 Post subject: Motors and other equipment for sale
Posted: Thu Jun 12, 2008 11:15 am 
 
General
User avatar

Joined: Mon Apr 10, 2006 12:43 pm
Posts: 53
Good day. I have sold all of the motors.




Posted  11/12/2012