problem with CC2500 RF (chipcon) - RF Cafe Forums

RF Cafe Forums closed its virtual doors in 2010 mainly due to other social media platforms dominating public commenting venues. RF Cafe Forums began sometime around August of 2003 and was quite well-attended for many years. By 2010, Facebook and Twitter were overwhelmingly dominating online personal interaction, and RF Cafe Forums activity dropped off precipitously. Regardless, there are still lots of great posts in the archive that ware worth looking at. Below are the old forum threads, including responses to the original posts.

-- Amateur Radio

-- Anecdotes, Gripes, & Humor

-- Antennas

-- CAE, CAD, & Software

-- Circuits & Components

-- Employment & Interviews

-- Miscellany

-- Swap Shop

-- Systems

-- Test & Measurement

-- Webmaster

VictorTati

Post subject: problem with CC2500 RF (chipcon)

Posted: Mon Mar 27, 2006 2:10 am

Lieutenant

Joined: Mon Mar 27, 2006 2:06 am

Posts: 1

Hello. I program PIC18f2520 for the work with RF CC2500. when chip it works only on the receive or only to the transfer of errors it does not appear. But when I switch CC2500 from the transfer to the receive, it

nothing assumes.

mac27

Post subject: About CC2500

Posted: Fri Dec 08, 2006 8:57 am

Lieutenant

Joined: Fri Dec 08, 2006 8:44 am

Posts: 1

I have problem with CC2500 in RX module (TX module is fine).

I don't get any bytes in RX BUFFER, bat RSSI is Ok when TX module is working (BUFFER have 16 bytes before STX on and is always empty when STX is on).

I use the PIC16F648A and a LCD for tests.

I believe that the problem are us register but I do not be sure (bat I don't know the right values)

Someone has some idea for this problem?

Thanks (my english is very poor).

Posted 11/12/2012

RF Electronics Shapes, Stencils for Office, Visio by RF Cafe


Please Support RF Cafe by purchasing my ridiculously low−priced products, all of which I created. RF Cascade Workbook for Excel RF & Electronics Symbols for Visio RF & Electronics Symbols for Office RF & Electronics Stencils for Visio RF Workbench (shareware) T-Shirts, Mugs, Cups, Ball Caps, Mouse Pads These Are Available for Free Calculator Workbook Smith Chart™ for Excel

About RF Cafe Copyright: 1996 - 2024 Webmaster: Kirt Blattenberger, BSEE - KB3UON RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a nice lady's voice announced "You've Got Mail" when a new message arrived... All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged. My Hobby Website: AirplanesAndRockets.com