|
Our Semi-Custom Products:
“Almost Off the Shelf”
The products offered on AMCrf.com are either available from stock or in a few days after your order. However
it's important to remember that the products you see on our site are popular models used in specific
applications, frequencies, and configurations. However, they’re just examples of the products many of whose
specifications we can quickly modify. That is, you should think of them as “almost off-the-shelf “as we can
turn them around quickly and in most cases without any NRE.
For example, key parameters of most
filters can be modified very quickly, such as center frequency, bandwidth, rejection points, and connectors
such as BNC, SMA, Type-N, TNC, SMC, etc. Even though our ceramic filters are designed for surface mounting,
they can be placed in a connectorized enclosure and still retain their superb electrical characteristics very
quickly.
Need it weatherized? No
problem
Of all the types of filters we manufacture, cavity bandpass filters are the most likely to be used
outdoors or within closed areas that are not totally sealed from the ravages of the environment. This is
typical when they’re used to remedy interference conditions that did not exist during installation or when
modifications are made to accommodate new wireless networks, many times at the top of the tower. As we are
almost continuously manufacturing cavity filters for wireless, satellite communications, and other systems
that must be protected against hostile environments, specifying one of our standard products for outdoor
applications will almost never significantly increase delivery time.
In addition, while products for
defense applications can often require significant “hi-rel” testing, other MIL specs can be met by standard
products with modifications that we can make quite quickly. This is because Anatech Electronics has been
manufacturing filters and other products for defense applications for decades and our in-house capabilities
make this possible.
Filters are not the only products that can be modified in many ways to become semi-custom models, and various
specifications and physical conditions to power dividers, directional couplers, and other products can be made
quickly as well.
So if you cannot find exactly what you want at AMCrf.com, please call us before you
make any other decision. As so many of our customers have found, you'll be glad you did. You can reach us at
(973) 772-4242 or by e-mail at
sales@anatechelectronics.com.
Help Us Out…
Get a Spectrum Chart!
We’re interested in your opinion and we know how valuable your time is. So if you would please take a few
minutes to answer our short questionnaire, we’ll send you a copy of the complete U.S. frequency spectrum chart
in full color…always a handy reference.
Please click
here
to take the survey….and thanks in advance!
Trivia Questions...
1. When does the porcupine acquire a fully developed set of quills?
2. What U.S. university offers a
performance degree in bagpipes?
3. What inspired ice cream maker William Dreyer to name a flavor Rocky
Road?
Check for answers in next month's issue! |
AMCrf.com: New Look, Easier To Use…
Check It Out
We’ve made some significant changes to our Web store,
www.AMCrf.com. They’re designed to make it easier than ever
to choose among our many filters and other products. We’ve categorized products by specific applications,
added important news to the banner area at the top of the home page, and made several other changes we hope
will make your visits more productive than ever! www.amcrf.com.
New at AMCrf This Month: Filters, Couplers,
and More…
1 to 4 GHz, 20 dB directional coupler
The
AM2500DC871 is a general-purpose 20 dB directional coupler designed for in-building, wireless
infrastructure, and many other general-purpose applications operating between 1 and 4 GHz. The coupler has
only 0.4 dB of insertion loss, 1 dB coupling flatness, directivity of at least 23 dB, and VSWR of 1.2:1. It
handles 50 W CW, uses SMA female connectors, and measures 2.2 x 0.7 x 0.4 in.
1 to 500 MHz
2-Way Power Divider
The
AM250PD1010 two-way power divider operates from 1 to 500 MHz and has insertion loss of less than 0.8 dB,
isolation of at least 25 dB, amplitude balance of 0.3 dB, phase balance of 2 deg., and a maximum VSWR of
1.3:1. The power divider will handle 1 W CW, has Type-N connectors, and measures 1.25 x 1.25 x 0.75 in.
Connectors can be SMA, BNC, TNC, F, or Type-N female.
428.5 MHz SMT Ceramic Bandpass Filter
The
AM428B1048 has a center frequency of 428.5 MHz, passband of 412 to 445 MHz, insertion loss of less than 3
dB, passband ripple of less than 1.5 dB, and return loss greater than 11.7 dB. It offers rejection of at
least 25 dB, and operates from -30 to +75 C.
New In-Stock Products
For Rapid Delivery!
153.075 MHz Crystal Bandpass Filter
The
AM153.075CR162 crystal bandpass filter has a center frequency of 153.075 MHz and a 12 kHz 1-dB bandwidth
with insertion loss of less than 6.5 dB, ripple of less than 1 dB, and rejection of 45 dB at 152.025 MHz and
60 dB from 153.225 to 153.5 MHz. The filter handles 0 dBm input power, has BNC female connectors, and measures
2.37 x 0.74 x 1 in.
452 to 467 MHz SMT Ceramic Duplexer
The
AM452-467D993 duplexer has insertion loss of less than 2.8 dB, isolation of at least 40 dB, return loss
greater than 15 dB, ripple of less than 1 dB, and handles 5 W CW. Band 1 is 450 to 455 MHz and band 2 is 465
to 470 MHz. The duplexer measures 69 x 35 x 10 mm and operates from 30 to +85 C.
811 to 824
MHz/856 to 869 MHz Bandpass Combiner
AD817-862C107 bandpass combiner has insertion loss of less than 3 dB, uses Type-N connectors, and handles
20 W CW. Band 1 is 811 to 824 MHz and Band 2 is 856 to 869 MHz. It measures 214.5 x 205 x 48 mm.
If you
have any questions regarding our products, or comments on our newsletter, please email us at:
filters@anatechelectronics.com
|
