|
|
Z-Comm Intros 390 to 440 MHz VCO
|
May 23, 2013
-- VCO: CRO0419A-LF Features Low Phase Noise Z-Communications,
Inc. announces a new RoHS compliant VCO (Voltage Controlled Oscillator) model
CRO0419A-LF
for P25 mobile radios and basestation equipment. The CRO0419A-LF is designed to operate between
at 390 and 440 MHz within a tuning voltage range of 0.5 to 5 Vdc. This VCO features
phase noise of -117 dBc/Hz @ 10 kHz offset and a typical tuning sensitivity of 17 MHz/V.
The
robust CRO0419A-LF provides the end user typical output power of -4.0 dBm into a 50 Ω load
while operating off a 5 Vdc supply and drawing 40 mA, typically, over the temperature
range of -30 to 70 ºC. This VCO features typical second harmonic suppression of -15 dBc
and comes in Z-Comm's standard MINI-16-SM package measuring 0.5 in. x 0.5 in. x 0.22 in.
This low noise VCO is further heightened by pushing less than 0.5 MHz/V, with 5% change
of the supply voltage, and pulling less than 0.1 MHz with a 12 dB return loss, any
phase.
For
further information on this model or any other product from Z-Communications, Inc. please contact
our Applications department via e-mail at
applications@zcomm.com
or call us at 858-621-2700.
[borders/inc-300x250.htm]About
Z-Communications, Inc.
Z-Communications, Inc. is a pioneer in developing Voltage
Controlled Oscillators (VCO) and Phase Locked Loop (PLL) synthesizers for the commercial marketplace
since 1987. With devoted customers, Z-Communications, Inc. serves wireless and communication
industries by providing the most effective and competitively priced RF/microwave components,
as well as custom component designed to meet customer specific needs. Our sophisticated automated
manufacturing facility, located in the US at our headquarters in San Diego guarantees a high
level of repeatability, reproducibility and control. For more information please visit us at
www.zcomm.com or contact our sales department.
Contact: Z-Communications, Inc. Phone: (858) 621-2700
Fax: (858) 486-1927 URL: http://www.zcomm.com
Email:
mailto:applications@zcomm.com
Posted /2013
|
|
|