Microwave T&M Equipment from Rohde & Schwarz at EuMW 2014 in Rome
All roads lead to Rome ? this year, this also holds true for the microwave industry. Rohde & Schwarz will
present its wide-ranging portfolio of T&M equipment for microwave applications at European Microwave Week 2014.
September 2, 2014
From signal generation and analysis in the microwave range to power measurement and vector network analysis in
the highest frequency ranges: Rohde & Schwarz will showcase its T&M equipment for sophisticated wireless and
A&D applications at EuMW 2014. In addition, Rohde & Schwarz specialists will hold 16 workshops and seminars
at the event. The company's display (in hall 9, booth 102) at the Fiera di Roma exhibition center will include the
Complex multichannel and pulse scenarios up to 20 GHz with the R&S
SMW200A Rohde & Schwarz has extended
the frequency range of its R&S SMW200A high-end vector signal generator to 20 GHz. It is the only instrument on
the market to combine baseband generator, RF generator and fading simulator in one box. Now users can also take advantage
of its outstanding flexibility, top performance and intuitive operation when generating complex multichannel scenarios
in the microwave range. The R&S SMW200A now allows two broadband signals up to 20 GHz, modulated as desired, to
be generated in a single instrument. Even fading and MIMO scenarios can be configured over the entire frequency range.
Another highlight at EuMW: Rohde & Schwarz will present new options with which the R&S SMW200A can generate
complex pulsed signals as are needed, for example, for tests on radar components. These options also take into account
the influences of antenna patterns, antenna scans and the mutual positions of transmitter and receiver. The enhancements
are targeted in particular at users in the fields of wireless communications and aerospace and defense.
Analysis of complex pulsed signals with the R&S FSW
Featuring an analysis bandwidth of up to 500 MHz, the R&S
FSW high-end signal and spectrum analyzer
offers developers of radar components for aerospace and defense and automotive applications a wide variety of analysis
capabilities. The R&S FSW-K6 option for pulse measurements makes it possible to analyze complex pulse parameters
at the press of a button. Even pulses with short rise and fall times can be automatically detected, measured and displayed
in both the time and frequency domain. Users in the A&D industry will benefit from the R&S FSW-K60 transient
analysis option and the R&S FSW K60H option for analyzing hopping signals. Chirp signals typical of automotive
radar can be characterized using the R&S FSW K60C option for analyzing FM CW signals. The R&S FSW is the only
product on the market that offers a resolution bandwidth of 50 MHz in swept mode, addressing the requirements of the
ETSI EN 302 264 1 standard for road transport and traffic telematics in the 77 GHz to 81 GHz band. The instrument
uses external harmonic mixers to analyze signals in this frequency range.
First vector network analyzer featuring 24 test ports Rohde & Schwarz will present the R&S
ZNBT, an innovative multiport VNA solution.
Depending on the application requirements, the vector network analyzer can be equipped with up to 24 test ports. It
covers the frequency range from 9 kHz to 8.5 GHz and offers, at each of its test ports, the high RF performance of
a two-port network analyzer. It is able to determine all 576 S-parameters of a 24-port DUT at 201 points in less than
260 ms. In production lines, multiple DUTs can be measured in parallel and with high throughput.
Seminars and Workshops
At European Microwave Week, experts from Rohde & Schwarz will conduct altogether 16 workshops and seminars.
The wide range of subjects will include pulse generation for radar applications, the basics of radar waveform measurements
and group delay measurements on broadband multicarrier signals for satellite communications. If you are interested
in learning more about the Rohde & Schwarz workshops and seminars, click
here; a registration form is available there.
On Tuesday, October 7, 2014, representatives from the Rohde & Schwarz press office will be hosting a press
day for journalists.
Contacts for readers:
Customer Support Europe, Africa, Middle East: +49 89 4129 12345
Customer Support North America: +1 888 TEST RSA (+1 888 837 87 72) email@example.com
Customer Support Latin America: +1 410 910 79 88 firstname.lastname@example.org
Customer Support Asia Pacific: +65 65 13 04 88 email@example.com
Customer Support China: +86 800 810 8228 or +86 400 650 5896 firstname.lastname@example.org
Rohde & Schwarz
The Rohde & Schwarz electronics group is a leading supplier of solutions in the fields of test and measurement,
broadcasting, secure communications, and radiomonitoring and radiolocation. Founded 80 years ago, this independent
global company has an extensive sales network and is present in more than 70 countries. It has around 9300 employees
and achieved a net revenue of EUR 1.9 billion (USD 2.5 billion) in fiscal year 2012/2013 (July 2012 through June 2013).
The company is headquartered in Munich, Germany.
Posted September 2, 2014