February 1, 2016
High Performance – Feature Rich – Patented Architecture – Operate from your Smart WiFi device, LAN, or Front Panel Touchscreen
Empower RF is pleased to announce the release of the Low Power Series of our Next Generation family of
RF amplifier systems. Leveraging our
patented architecture, these broadband RF and microwave amplifiers are housed in a compact 3U air cooled chassis and are equipped with feature
rich software control, making these amplifiers configurable to a wide variety of applications requiring digital modulation, multi-tone/multi-carrier,
pulsed, and AM/FM/CW. With power combinations ranging from 35 watts to 250 watts, this series is ideal for RF component test and EMC compliance
testing. With an optional 28 VDC input power or optional 400 Hz input power, these amplifiers are also well suited for land mobile
and airborne applications including deployable communications networks, satcom, telemetry, and electronic attack.
2191 |
20 - 1000 |
100 |
R3U |
2192 |
20 - 1000 |
250 |
R3U |
2175 |
80 - 1000 |
500 |
R3U |
2193 |
1000 - 3000 |
100 |
R3U |
2194 |
1000 - 3000 |
250 |
R3U |
2195 |
2000 - 6000 |
50 |
R3U |
2196 |
2000 - 6000 |
80 |
R3U |
2197 |
2000 - 6000 |
130 |
R3U |
Selectable User Output Power Control
- Automatic Gain Control (AGC)
- Automatic Level Control (ALC)
- Manual Gain Control (MGC)
Selectable Measurement Modes
- CW, FM, AM
- Digital Modulation
- Multi-carrier / Multi-tone
- Pulse Modulation Protection
- Load VSWR 3:1
- Input Overdrive
Protection
- Thermal Overload Protection
- AC Power Supply Protection
- Out of Band Drive Protection
Built in Peak Detectors
- Input and Output Detectors
- Selectable Peak and RMS
About Empower RF
Empower RF Systems is a leader in power amplifier solutions targeted at four key markets - electronic attack, communications, radar, and
test & measurement. Our products incorporate the latest semiconductor and power combining technologies and originate from an extensive library
of "building block" designs. Solutions range from basic PA modules to multifunction PA assemblies with embedded, microprocessor controllers.
Contact:
Corporate Offices: sales@empowerrf.com
http://www.EmpowerRF.com Empower RF Systems, Inc. 316 W. Florence Avenue Inglewood,
CA 90301 P: +1 (310) 412-8100 F: +1 (310) 412-9232
Posted February 5, 2016
|