 AWR
Corporation
El Segundo, CA
Tel (310) 726-3000 |
AWR, the innovation leader
in high-frequency EDA, provides software solutions that maximize user productivity for the design of high-frequency
ICs and communications systems for the aerospace / defense, semiconductor, computer, consumer electronics, and telecommunications
markets.
Free Trial Downloads Available
|
| Products |
 •
Microwave Office®
– complete RF and microwave software for IC design, from integrated microwave assemblies to MMICs and everything
in between.
•
Visual System Simulator™ – RF/wireless communication systems software for end-to-end
design of today's complex communication and radar systems.
 •
Analog
Office® - high-frequency analog/RFIC software for the design of RF and analog ICs.
•
Axiem®
– 3D planar EM simulation of passive components on RF PCBs, modules, LTCCs, MMICs, RFICs, and antennas.
•
Analyst™
- 3D FEM EM simulator for passive interconnect on chip (MMIC), its related packaging, as well as RF circuit boards. |
|
 Antenna
Factor
Merlin, OR
Tel: (800) 736-6677 |
 |
| NOTICE: Antenna Factor has been combined with the
Linx Technologies
website. |
| Antenna Factor is a world leader in cost-effective antennas. Standard and custom products are available
to support a wide variety of OEM applications. Our antennas are designed to offer maximum performance at a cost-effective
price. |
 |
| Antenna Products Include |
|
 Monopole
- PW, CW, HW, RH, HD, RAH, RCR, RCS, RCL, LP, RA, PMA, PMB, PMC
Dipole - HWR, HW, RCL, RCT, PML, RAF, MHW, HDP, VDP, DSK, DBD
Embeddable - Chip, SP, JJB, HE Series
Specialty
- JJB, HE, SP, DSK, DBD,
 MHW,
HDP, VDP, RMT, RMS, Chip, "Ant Skins" covers
Dual-Band Hole-Mount - DBD, RMS, RMT Series
Magnetic Base - Allow for semi-permanent mounting on metal surfaces
 GPS
- DBD, UC, ST, SE, PS Series
Fixed Point
- Yagi & Corner Style
Custom
- Tap into our expertise
Evaluation
Systems - Kits for testing |
|
 By
Guided Wave Technology
Denmark |
| Guided Wave Technology's Coupling Matrix Synthesis (CMS) tool facilitates synthesis of N+2 coupling matrices
for Chebyshev bandpass filtering functions, with arbitrary finite-position transmission zeroes. |
 |
The CMS tool gives
a fast and accurate
overview of: |
● Filter orders up to 12
● Arbitrary placement of transmission zeroes
● Complex transmission zeroes
● Extended parameter plotting options
● S-parameter
file (s2p) generation
● Topology matrix definition of filter circuits
● Advanced
graph and marker functions
● Easily re-scalable axes
● Excellent overview - input/output
together
● Saving and loading of designs
● Fast response
● Integrated
manual
● Intuitive and very user friendly interface |
|
| Guided Wave Technology
is a microwave filter R&D company, specialized in development and production of
passive filter prototypes and series. |
|
 Electro-Photonics
772-485-0927
Palm City, FL |
 |
| High frequency components and design services. We offer wire bondable passive components, coaxial products,
printed antennas and very useful test boards for evaluating RF/Microwave components. Custom-design passive components
and offer high frequency packaging services. The Electro-Photonics team can support your small R&D design requirements
and save you valuable design and characterization time. |
 |
• Passive RF Components
- 2-way power dividers/combiners
- Wire-bondable quartz spiral inductors
- Wire-bondable single-layer capacitors
- Coaxial cable assemblies
-
Patch antennas |
 |
• Chip & Wire Assembly Services
- 10K clean room
- RF measurements to 110 GHz
- MMIC package design |
 |
• Custom Evaluation Boards
- Evaluation boards per manufacturers' layouts
- Layout optimization
- 0201, 0402, and 0603 2-terminal devices
- SOLT de-embedding |
|
Accent S.p.A.
+390396290100 / Italy
SOC, mixed signal & RF design house. Services include system prototyping, IC design, analogue and mixed signal design, intellectual property services.
Adamson Consulting
720-496-4002 / Boulder, CO
Specialists in intellectual properties strategies, product development, safety marks, and onsite electromagnetic measurements.
Adrio Communications
+44 (0) 1784 455511 / Staines, England
Expertise in technology from engineer and author Ian Poole. Technical journalism, training and electronics engineering services.
Aerial Facilities Limited - AFL (now Axell Wireless)
+44 1494 777000 / UK
Provider of coverage systems and a major force in wireless communications worldwide, offering a wide range of technologies and platforms, consisting of products including cellular (GSM, EDGE, UMTS, CDMA 450, WiFi, Wimax), public safety (TETRA, TETRAPOL, GSM-R, UHF, VHF, APCO25), broadcast (FM, AM, DVB-H), specialist (GSM-R, Military Communications, Air Band Communications, Non-standard wireless technologies).
Allics Technology
480-857-6447 / Chandler, AZ.
Professional IC design, product research and development services. Allics provides not only custom analog, complex mixed signal, high performance & Precision, ultra low power, RF and microwave circuit design. But also offers all aspects of complex & custom ASIC design services and System-On-Chip design services from concept to silicon. Furthermore, Allics provides a variety of solutions and silicon proven Intellectual Property (IP) for the most widely applications.
AmpliTech
631-521-7831 / Holbrook, NY
Designs, develops, and manufactures custom and standard state-of-the-art low noise amplifiers (LNAs) , medium power amplifiers, and amplifier-related sub-assemblies for commercial, SATCOM, space, and military markets. These designs cover the frequency range from 50 kHz to 40 GHz.
Analog RFic Design Services
London, UK & Nürnberg, Germany
We are a group of analog & RF engineers providing design services & solutions. From the very first feasibility study to the final finished product, our consultants provide world class solutions in a timely manner. We provide designs & IP cores using the latest CMOS & BiCMOS technologies and on PCBs (FR4, Rogers, Duriod). On chip analog & RFIC designs – complete transceivers & ADCs. RF board designs from the antenna down to the baseband interface. Fast turn around MPWs & PCB prototypes. Design reviews & assessments. Expert witness services. Test & measurement services & automation programs.
AnaRFICs
415-670-9541 / San Francisco, CA
Specializing in RFIC and analog IC design services, we are a team of engineers with a wide variety of design skills ranging from communications system design to analog and RF design at the chip and board level. We partner with several digital design teams to offer a full and cost effective SOC turnkey solution in CMOS, BiCMOS or bipolar. A complete analog IC solution can be developed with samples for as little as $30,000. (We also accept smaller consulting jobs.)
Andrey Gleener R&D Services
604-844-7578 / Vancouver, BC, Canada
Design and development of embedded antennas. Multiple patents.
antennas.us
954-0975-2712 / Margate, FL
Antennas for military, mobile radio, GPS, EMS, satellite/terrestrial, ISM, WLAN/Wi-Fi/WiMax, Ham, AM/FM/satellite radio. Cable assembly, connectors, diplexers & filters, software, measurement services.
Antenna Systems & Solutions
+1-847-584-1000 / Schaumburg, IL
An international distribution firm specializing in HF, VHF, UHF, WiFi, and Microwave systems. Our installation and engineering technicians use the most advanced site planning technologies to make sure the project gets done, and gets done right. We have successfully completed a major communications project on every continent for high-end commercial companies and government agencies. Complete ranges of antennas, towers and masts for HF, VHF, UHF, and microwave, in parabolic, sector, yagi, omni directional, patch, and disguised formats. Coaxial cable and waveguide assemblies built & tested to your specs.
Antenna World
305-471-9507 / Miami, FL
Offers a wide selection of antennas, cable, connectors and antenna accessories for various applications and markets. Also provides testing and design services.
Apex Wireless, Inc
303-443-6699 / Boulder, CO
Spread spectrum radio transceivers & one way RF transmitters & receivers in the UHF, 900 MHZ, & 2.4 GHz frequency bands, also provide RF contract development services & wireless consulting services, as well as technology licensing, specialize in low cost one way & two way radio links in the unlicensed (ISM) frequency bands.
Applied Research Associates, Inc
505-881-8074 / Albuquerque, NM
Provides innovative, in-depth and diversified research, engineering, and technical support services to clients in government and industry.
APLAC Corporation (now AWR)
+358 9 540 450 00 / Espoo, Finland
APLAC Solutions was acquired by Applied Wave Research. AWR-APLAC is the developer of APLAC analog and RFIC circuit simulator. APLAC simulator is now integrated into AWR's Analog and Microwave office design tools.
Applied Wave Research (AWR)
310-726-3000 / El Segundo, CA
High-frequency EDA products for the design of wireless telecom equipment, semiconductors, high-speed computers, networking systems, automotive mobility systems, & a variety of other products. Microwave Office, Analog Office, Visual System Simulator, APLAC, Axiem.
Artek Manufacturing
858-452-6456 / San Diego, CA
Prototype assembly; BGA, CSP, LCC rework, Remove/Replace/Reball; X-ray services; Visual Inspection services using fiberoptic lenses.
Ascom
+41 31 999 11 11 / Switzerland
Provider of services for telecommunications systems, integrated voice & data communications, wireless & corded security solutions & networked revenue collection systems.
BH Technology
845-362-3316 / Monsey, NY
One-stop shopping from concept to prototype development, as well as enhancement, re-engineering, and commercialization of existing products.
Blue Streak, Inc
985-893-1972 / Covington, LA
We provide quality senior level RF engineering consulting services by experienced professionals on a project or hourly basis. We perform engineering, RF project management, consulting, and expert witness services, including: wireless network design, intermodulation and propagation analysis, photo simulations, antenna site verification visits, optimization, and FCC license preservation filings. Let us show you why our motto is Getting it Right the First Time.
BKC Consulting Group, LLC
Bedford, NH
home: (603) 488-5781; cell: (510) 326-6314
E-mail: brad.cowan@bkcconsulting.net
I have more than 20 years of design, analysis, and modeling experience with RF, antenna, communications, and EW/SIGINT systems to apply to your project. My time as a consultant is available on a part-time basis.
Cats Design Communications
215-364-7101 / Churchville, PA
A small group of head-end technicians located in the northeast. Planning, constructing, wiring, labeling, balancing, and cutovers. We will work with you to get your "I need it now" project done with an in-house feel.
CEATI International, Inc
514-904-5546 / Canada
EMTP-RV is specialized software for the simulation and analysis of transients in power systems.
Chemandy Electronics
+62 31 8914627 / Jawa Timur, Indonesia
Large selection of online interactive calculators for RF design, including attenuators, capacitance, resonance, RF traps, and microstrip impedance. Design, development and small scale manufacture of simple RF and Audio items. We also have the capability for ATE programming in Labview, HP/Agilent Vee or Visual Basic, and can produce associated test jigs.
Chipworks
613-829-0414 / Ottawa, Ontario, Canada
An integrated circuit reverse-engineering company. Curators of the famous Silicon Art collection.
Comsat Laboratories (now ViaSat)
301-428-4500 / Clarksburg, MD
Technical consulting, engineering design and system engineering for satellite and wireless communications.
Concept:Create
613-612-9309 / Ottawa, Ontario, Canada
RF/Microwave component and system design, Patent analysis. We have successfully delivered services in the wireless, military, OEM and manufacturing industries to name a few.
Consultants Mall
212-799-5239 / New York, NY
Need a consultant? A highly experienced, productive individual or small firm to help in achieving your goals? Here, in the Consultants Mall you will find reliable outside resources; services available from consulting firms and independent specialists in both business and technical categories. Submit your name for inclusion.
Convergence Devices Inc.
416-580-5910 / Richmond Hill, Ontario, Canada
Electronic systems design, schematic capture, PCB layout, and board manufacture. Component engineering (BOM analysis and creation), quick turn PCB design and prototype, controlled impedance, complex mixed-signal, low-signal, analog, RF, high speed digital, FPGA design and programming. Full turnkey demo boards and reference designs - including boards, software. Signal integrity, EMI/EMC testing and FCC compliance, RoHS, provide documentation.
CSDG (Custom Software Development Group)
423-586-2820 / Morristown, TN
Software & application development services. Our portfolio includes major business critical applications for Fortune 500 companies as well as small mom-and-pop applications for growing entrepreneurs.
CurrentRF
209-914-2305 / Tracy, CA
Provides engineering consulting services to companies seeking to increase their knowledge in digital to analog converter design, through consulting and contract design.
Custom and Contract Power Solutions Ltd
+44 (0)1896 758789 / UK
Switched mode power supply design services from concept through to volume production, enhance and streamline your products for manufacturing, provide prototypes through our prototype build service, prepare build documentation for volume production, PCB design service, advise and submit products for Safety and EMC compliance.
Custom Systems Integration - CSI
607-757-0200 / Endicott, NY
CSI performs 3 main types of contracted services: design and development; build to print; and time and materials. Custom Test Systems (EE, ME, Sw, Fab, Assembly). CSI's engineering and manufacturing team is proficient in segments of engineering extending literally from DC to light. Whether your system is digital, analog, RF, microwave or optical we can help!
Daycounter, Inc. Engineering Services
801-523-8444 / Sandy, UT
Rapid prototyping, and customized electronic product design. We offer a full range of design services from contract software and firmware development, to electronics design and PCB Layout. Huge collection of online engineering calculators.
dBm Engineering
720-406-1200 / Boulder, CO
Provider of state-of-the-art RF power engineering services for diverse companies developing wireless applications, broadcast TV systems, pulsed radar, satellite, and avionics engineering systems for both commercial and military markets.
Designer's Guide Consulting
Provides verification and simulation services to companies involved in complex analog, RF, and mixed-signal integrated circuit (IC) design.
Design Prototyping Technologies (DPT)
315-434-1869 / East Syracuse, NY
Rapid prototyping capabilities including stereolithography (SLA) and selective laser sintering (SLS) to fused deposition modeling (FDM) and injection molding.
Digital Microwave Communications
619-684-4012 / Chula Vista, CA
A professional radio design facility providing RF microwave product development and consulting including custom transmitter, receiver and transceiver designs from prototype to manufacturing.
Digoria Microwave
519-893-9849 / Kitchener, Ontario, Canada
RF engineering software, information and consulting, specializing in filters (substrate & waveguide) and patch antennas. WR-Connect waveguide structure design tool. Corrugated Low-pass Filter Design Workshop.
DSB Scientific Consulting
803-408-2729
Provides cost effective computational chemistry services to help small firms solve chemistry research and development problems and assists management and researchers with computer simulation services including computational chemistry using ab initio, density functional theory or molecular dynamics, highly optimized custom scientific software, high performance computing resources, chemical reaction modeling, and computational fluid dynamics (CFD) of reactive flows.
Electronic Design Consultants (EDC)
503-749-3444 / Aumsville, OR
RF/analog design services.
Electronic Prototypes, Inc
540-929-4712 / Copper Hill, VA
Contract manufacturer for printed circuit board design, fabrication, and full turn key electronic prototyping.
EMA Consulting Engineers
859-420-1026 / Orlando, FL
EMA assists architects, the legal profession, and the insurance community in the investigation and redesign of structures. We solve design issues of already designed buildings and performing damage assessment.
ELXYS Innovations S.A.
+302106108998 / Athens, Greece
Fabless semiconductor company providing analog, RF, and mixed-signal IC design services and relative semiconductor intellectual property (IP) products for the most demanding wireless applications. CMOS and SiGe BiCMOS processes at different technology nodes spanning from 1.2 um to 65 nm.
EMConsulting
301-730-2144 / Hampstead, MD
Engineering consulting firm that specializes in electromagnetic compatibility (EMC). Whether you call it interference, noise, radio frequency interference (RFI), electromagnetic compatibility (EMC), electromagnetic interference (EMI), electromagnetic environmental effects (EEE, E3, or E3), solving interference problems is not "black magic." By considering basic laws of physics, EMConsulting will apply 30 years of experience to provide effective engineering solutions to prevent or eliminate electrical interference problems in your products.
LinkedIn: www.linkedin.com/in/stubenner
Ensco, Inc
800-ENSCO-VA / Falls Church, VA
Provides engineering, science & advanced technology solutions for the defense, security, transportation, environment, and aerospace industries.
ERZIA Technologies S.L.
0034 942 29 13 45 / Spain
ERZIA Technologies supplies custom designed RF & Microwave systems, ATE RF equipment, satellite link emulators, Eb/No generators, wireless product design and RF and Microwave consulting services.
Filtronetics
816-231-7375 / Kansas City, MO
Leading supplier of custom IF, RF, Microwave, EMI(military) & Front End filters. Filter types include LC, crystal ceramic, SAW & microwave from DC to 10 GHz . Oscillators and crystals are available including TCXOs & VCXOs. Filtronetics Inc has been providing solutions to for 35 years and is ISO-9001:2000 certified.
Future Technologies, LLC
770-995-6070 / Lawrenceville, GA
A professional services and technology integration firm specializing in the delivery of unique and innovative solutions for government and commercial customers worldwide. Through the utilization of leading edge broadband wireless technology, satellite communications, and converged network applications, Future Technologies’ inventive products have demonstrated their value in standard community environments, austere emergency environments and combat situations.
Gaddon Consultants
0044 (0)1226 766999 / UK
Technical services and advice covering RF and ATE, using ILS techniques as used by DLO and DPA. We can assist with your DPA and DLO bids with specialist advice. We have helped several US companies by providing UK support for their projects and advice with RF based Defense Logistics projects. We have MoD clearance & experience working for and with the DLO.
Gator•CAD
561-704-2445 / Boynton Beach, FL
A consortium of design specialist providing electrical, printed circuit board (PCB) artwork, and mechanical designs plus prototype assembly.
GreenWave Scientific
919-876-6220 / Raleigh, NC
Develops unique form, fit and function antennas for unique applications and requirements. Very simply, we design and manufacture antennas unlike any other antennas in the world. Custom designs available.
Haynes-Bent, Inc
630-845-3316 / Geneva, IL
RF design services that helps businesses get their wireless products and services to market in a timely manner. The main market is design services with specialization in component design of high frequency electromagnetic active and passive circuits.
Heuermann HF-Technik GmbH
+49 2402/9749764 / Stolberg, Germany
Heuermann HF-Technik GmbH (HHF) is a spin-off of the Aachen University of Applied Sciences, founded 2008. The experience and know-how of the department of high-frequency technology of Prof. Heuermann builds the ground of the novel products of HHF. Our core competencies comprise planning, development, manufacture and services for systems, facilities and equipment relating to information, communication, plasma and microwave technology. Along with manufacture of standard products, HHF develops and builds special-purpose and individual products tailored to clients’ specific requirements.
Hunt Dabney & Associates
714-540-2372 / Costa Mesa, CA
Specializes in developing innovative, high quality RF electronic products including industrial, commercial, medical and military electronics, as well as automatic test and process systems. We maintain comprehensive software and hardware development capabilities in support of any RF issue, and provide turnkey RF product development including R&D, project management, specifications development, system and circuit design, software and firmware development, PCB and package design, production documentation, prototype assembly and testing pilot production.
Hydratel Telecommunications
00447891401693 / London, UK
Accomplished technical and project management, equipped with a commanding track record in design, development, production, repairs and measurements of communications and related technologies. IHS
800-525-7052 / Englewood, CO
Global provider of critical technical information, decision-support tools, and related services to customers in the energy, defense, aerospace, construction, electronics, and automotive industries.
IDEAS, LLC
316-633-4520 / Rose Hill, KS
Innovative design engineering and services. System design, circuit design, firmware/software/user interface, PCB layout, technical writing, , prototyping, testing, & lot manufacturing.
IEC & Associates
919-413-1290 / Raleigh, NC
Forensic electrical and electronic engineering, reverse engineering & patent infringement services.
Integrated Circuits Design - ICD
(now Texas Instruments)
Dallas, TX
High-performance analog products including amplifiers, ADCs, DACs, interface, power management and other ICs.
INTERLLIGENT RF & Microwave Solutions
+972-3-5160763 / Tel Aviv, Israel
Established in the year 2000 by a group of former army RF & Microwave engineers that served in the Israeli military Intelligence corps, in order to provide advanced high quality solutions, information and services to the RF and Microwave Industry in Israel & worldwide. We are the leading provider of RF solutions in the Israeli RF & microwave industry for training, test equipment trading and RF development services.
JEM Engineering
301-317-1070 / Laurel, MD
Design, manufacturing, and testing of antennas, microwave circuits, phased arrays, and associated electronics for military and commercial applications, covering the spectrum from 30 MHz to 40 GHz.
JPL Consulting LLC
203-838-8373 / Norwalk, CT
RF & microwave component and subsystem design, circuit simulation, hybrid design & manufacturing support, automated test equipment.
Kadco
610-252-5424 / Easton, PA
Machining facility dedicated to precision machining of intricate components, primarily non-metallic materials.
Knox Electronic Technologies (KnoxeTech)
603-379-2595 / North Hampton, NH
Our engineering facility has the tools to support, design, development, and build, high frequency devices such as; antennas, subsystems and systems, including full measurement capability to 40 GHz. MIL/Aero Radar & SATCOM, Application specific hardware / instrumentation / system development, Test Services, R&D, High Frequency Circuit/System Modeling and Simulation, including 3-D Finite Element, Test Fixtures, Commercial RFIC testing, Metrology with a concentration in microwave measurement science o Microwave & RF Measurement Systems.
Koral Associates
+44 149 183 1682 / South Oxfordshire, UK
Radio frequency heating and drying consultancy service. Radio Frequency Interference (RFI) advice and solutions: assistance with EN55011 (Europe), AS2064 (Australia) and FCC Title 47 Part 18 (USA) compliance and measurement. Practical shielding and filtering solutions for RFI reduction for existing machines and new designs Health and Safety Advice and Solutions including OSHA CFR 1910-97 (USA) Physical Agents Directive requirements for Non Ionising Radiation (Europe) Safe Interlocking, design of protective systems. RF Awareness. Triode tube (Valve) calculations and replacement advice. Expert witness service.
Labtech
+44 (0) 1544 260 093 / UK
A leading and integrated European based manufacturer of high-end microwave components and microwave manufacturing services.
LBA Group, Inc
252-757-0279 / Greenville, NC
RF & wireless telecommunications industry products & services including antennas, capacitors, inductors, shielding systems, test equipment, testing and technical services; RF Awareness & Antenna Co-Location Training.
Linwave Technology Ltd
+44 1522 681811 / Lincoln, UK
RF and microwave design and manufacturing company with specialist knowledge in module and sub-system design. Our experience encompasses the consumer, industrial, automotive and defense market sectors. SATCOM BUC, SSPA, Military microwave sub modules.
Lysko Consultings
+27 73 67 26 331 / South Africa
Consultancy in microwave and RF: computational electromagnetics, signal propagation, antenna placement, antenna design, test and measurement, passive microwave component design, HP HFSS and WIPL-D import/export, LabVIEW.
Maguffin Microwave LLC
978-470-0562 / Andover, MA
Design and development consulting services -- microwave and wireless, receivers, transmitters, synthesizers, exciters, antennas, communications systems, EW subsystems, radar subsystems, filters, oscillators, RF switches, amplifiers, wireless position measurement, component and system engineering.
Martronics
805-239-1932 / Paso Robles, CA
Discone Antennas: 7-500 MHz, 13.6-1300 MHz, 30-1300 MHz, BALUNS, UNUNS, mobile hitch antenna mounts, systems, and assembly services, PCB design & assembly services, RF cable assemblies, lightning & static detectors.
Material Solutions LLC
941-485-9073 / Venice, FL
Our focus is on electronic & structural materials & processes, applied materials, & powders including dielectrics and materials systems for high frequency, materials formulation, composites: MMC AlSiC, microsphere, glass and ceramic composites.
MEM Research
+39 347 8279009 / Italy
EM3DS (Electromagnetic 3D Simulator) is a novel, full-featured, frequency-domain full-wave simulation tool tailored to efficiently accomplish the analysis of quasi-planar structures.
Mentorport
44 (0)2380 868582 / Southampton, Hampshire, UK
An electronic design consultancy specialising in low cost, fast turnaround RF, wireless and microwave product design.
Metric Systems Corp
800-549-7421 / Vista, CA
Wireless networking equipment & solutions for government & industry, building broadband licensed & unlicensed networks in a range of environments including: critical infrastructure, energy, mining, transportation, seismic monitoring, fresh & waste water management, defense. software tools include NetBuilder, MavWatch, and NetWatch, as well as a range of custom networking applications and utilities.
|
 Apex
Wireless
Boulder, CO
303-443-6699 |
|
A History of Engineering Excellence
Since 1985, Apex Wireless has offered
consulting, engineering, and design services focusing on high-performance,
cost-optimized products that employ wireless RF transmitters, receivers, and transceivers. To complement our
RF design expertise, we work with local experts in DSP, ultra low power design, packaging, certification, and
manufacturing.
|
From Design to Production...
Electrical
• Analog / Digital / RF Design
• Software
/ Firmware
• Schematic Capture
• PCB Layout
• Prototypes / Production
• Validation
Mechanical
• Plastics / Packaging Design
• Modeling / Rapid Prototyping
Certification
• Consultation
• FCC/IC/ETSI Compliance Verification |
| Consumer | Defense | Aerospace | Power |
| Transportation |Industrial | Sports |
|
|
|
 Triad
RF Systems
East Brunswick, NJ
1-855-558-1001 |
 |
| Your source for RF Front Ends, TRANSCEIVERS and AMPLIFIER SYSTEMS that just plain work! Solutions for integrating
high performance HPAs into sophisticated RF subsystems and systems without sacrificing efficiency and linearity. |
|
Tower Mounted Amplifiers
 •
Higher Linearity- Reduce interference
and improve data rates.
•
Higher Efficiency - Reduce power
consumption resulting in savings.
Unmanned Aerial Vehicle
(UAV) Systems
 •
Maximum Bandwidth - Broader
communication options.
• Highest Efficiency
- Minimize
drain on on-board DC supply.
• Superior Linearity - Reduce interference
and
improve Data Rate.
Standard and Custom
Amplifier Subsystems
 •
Higher Linearity - Improve data
rates and reduce interference.
• Lower Costs
- due to low overhead
and minimum outside costs.
• New Technologies Available - Drop-in
computer screens, monitoring devices, and
efficient power supplies. |
|
|
Empower RF Systems
|
 |
Inglewood, CA
310-412-8100 (V)
310-412-9232 (F) |
Empower RF Systems is a global leader in power amplifier solutions that
are critical to defense, commercial, and industrial market applications. With our origins in the design of broadband
and band-specific SSPAs, Empower continues to advance the science of RF power amplification to produce the toughest,
most efficient and cost-effective solutions in the industry. Our priority is to design and deliver high quality,
innovative products which solve customer systems and business requirements. |
|
|
|
 Venture Technologies
North Billerica, MA
978-667-9890 |
 |
| We are passionate about
developing products that work better, and we have been delivering on
that passion for 25+ years, helping dozens of companies bring
innovative wireless products to market in a variety of markets. We
design and develop products that analyze, measure, control, and
communicate. Our in-house developed customizable, modular wireless
platform,
RFOS™ , allows us to do this better, faster and with less NRE cost.
We wrap our core embedded wireless capability in full service “spec to
production” product development. |
| PRODUCTS & SERVICES |
•
Embedded Wireless Engineering - Wireless
sensor networks, P2P, Star, Mesh topologies,
Low-cost SMT,
Custom antenna design, ISM
bands, Sub-GHz, 2.4, CDMA, TDMA,
DSSS, FHSS |
• Hardware & Software Design – Ultra low
power, Battery management, Analog and digital
hardware,
Measurement and control interfaces,
DSP, High-speed digital,
Mixed-signal,
ASIC/FPGA, Embedded software, RTOS |
• Technical Specialties – Energy harvesting,
sensors, signal processing, displays and UIFs |
•
Product development – Specification,
Prototyping, Mechanical and ID, Optimization,
Testing,
Certification |
|
Micro-Ant, Inc
508-679-9300 / Fall River, MA
Specification generation & compliance review, EM model simulation & optimization, antenna design with CAD documentation, antenna testing & analysis, prototyping & production design, manufacturing, consulting, system link budget generation & analysis.
Microwavefilters
+39(0)292162703 / Pioltello, Milano, Italy
Manufacturing of RF components including waveguide band and channel filters, duplexers, couplers, tapers, adapters, flanges, housings and cold plates for RF bridges, and also offers electric testing, project consulting and problem solving.
M M Stephens Engineering
00353 23 38185 / Ireland
RF & microwave design engineering services, up/down-converter design, microwave link design, measurement uncertainty analysis report authoring. We have a track record of RF & Microwave design of microwave point-to-point link system design, satellite and ground station equipment design; very strong on designing microwave metrology systems and researching & writing measurement uncertainty analysis reports for satellite & RF/microwave systems. Customers include ESA.
Modelithics
888-359-6359 / Tampa, FL
Device characterization, modeling and validation services. Large library of capacitor, resistor, inductor and diode models for CAE. Variety of body sizes and part values. Many application notes.
Morcom International
703-263-9305 / Chantilly, VA
The latest in wireless communications and advanced weather systems for commercial, security, government, and amateur use. Communications systems design, airport ground-to-air communications, weather information systems design, IT hardware support and management, repair and programming of radio transceivers, hydro-meteorological system design, airport weather observation systems (AWOS), export/import consulting services.
mWAVE Industries, LLC
207-892-0011 / Windham, ME
Antenna & antenna component design, development & manufacturing, antenna testing, consulting, build to print, volume manufacturing, antenna improvement studies. Products: Parabolic antennas, shaped beam, sector, omni, horns, helical, microstrip, patch, waveguide, embedded. Antenna Feeds: (waveguide, coax, multi-band, conscan, monopulse, Cassegrain).
NanoMEMS Research
949-262-3258 / Irvine, CA
RF MEMS research, consulting and education.
NasonTech Services
206-920-5659 / Washington
Concept-to-production electronics design & consulting services, specializing in RF, high-speed analog and mixed-signal systems. Project management, system and board-level specifications, system-level design: block diagrams / RF link budget analysis / DC power budget / provisions for EMIC, breadboard and evaluation kit test, design reviews, schematic capture, PCB layout, prototype assembly, test and debug, design for in-circuit-test (ICT) and statistical process-control, design verification testing, FCC / Type-approval testing.
NextGen RF Design, Inc.
507-382-4755 / Waseca, MN
A leader in providing expertise for next-generation technologies from 3G, 4G and beyond. Founded in 2008, NextGen RF has designed turn-key solutions for WiMax, LTE, asset tracking, medical test and measurement, wireless infrastructure, automotive and industrial wireless local area network (WLAN) and public safety.
Orchid Technologies Engineering and Consulting, Inc.
978-461-2000 x115 / St. Maynard, MA
Specializes in the design and production of high technology electronic products. Skillful blend of expert hardware and software engineering together with a spirit of creativity and innovation, tempered by the practical concerns of manufacturability, cost consciousness, testability and on-time delivery. Orchid will work with your idea, perform detailed design, construct prototype units, refine the prototype design and manufacture your electronic product.
PACER
Proven Analog Concepts Engineering/Research
256-828-2832 / Toney, AL
A Woman-Owned Small Business. Electronics hardware design services provider as well as an electronics R/R&D firm. We provide electronics engineering design talent and expertise to support the design of electronics for product development for commercial, military, and space applications. Specializing in analog circuit design, power supply, power electronics, and custom magnetics design.
PCB Interconnect Solutions, LLC
715-263-4310 / Clear Lake, WI
PCB design services including analog or digital, single/double sided or multi-layer, SMT or thru-hole, standard BGA's or micro BGA's, impedance controlled or standard requirements, resolve crosstalk or standard routing, PCB Interconnect Solutions (PCBiS).
PCNAlert (acquired by IHS)
626-585-2788 / Pasadena, CA
Implements and deploys a common standard for product change and end of life component information; also provides free trial and AML/AVL analysis and RoHS services.
PedaSoft
800-910-7919 Pack-IT™
A customized software tool for RF system simulation of packaged chips. Pack-IT models traces, substrate, active, and passive components simultaneously in a self-consistent way, which enables first-pass success for RF system design. Semi-IT™ A customized software tool for active component design such as a power amplifier (PA). Pack-IT models the PA, substrate, and matching circuits simultaneously in a self-consistent way, which enables first-pass success for RF component design. Please email us at support@pedasoft.com with your project request, and one of our technical team will contact you.
Phase IV Systems, Inc
256-535-2100 / Huntsville, AL
Specializing in cost-effective solutions for radar, communications, signal processing and other high-frequency military and commercial applications.
Photonuum, Inc
908-256-2165 / Skillman, NJ
Advanced fiber optic and photonic technologies that deliver unprecedented future-proof solutions for radio communications and antenna remoting, public safety and homeland security, battlefield, shipboard and airborne platforms; also a full-service systems integrator in the defense, public safety, aerospace and commercial sectors.
Plextek Ltd
+44 (0) 1799 533200 / UK
Custom electronic product and system design including multi-media GSM/GPRS handsets, Bluetooth based hands-free car kits, RF power amplifier modules, various full custom GaAs MMICs.
Plexus
920-722-3451 / Neenah, WI
Services include mechanical, electronic and software design, printed circuit board development, prototyping services, new product introduction, material procurement and management, printed circuit board and higher level assembly, test development, in-circuit and functional testing, final system box build, fulfillment and sustaining services.
PowerELab Ltd
A spin-off company from the Power Electronics Lab in Hong Kong University. While HKU holds the intellectual property rights PowerELab Ltd. has been granted the right to use and sublicense these technologies to its clients. We develop power supply products for customers. We provide solutions to increase efficiencies of your power supply products, explore new opportunities using our technologies, and provide services to meet regulatory requirements.
Precision Micro Ltd
+44 121 380 0100 / UK
EMI/RFI shielding solutions, from design to compliance. Precision manufacturing technologies from ion beam and electroforming to photo etch and laser cutting.
Prismark
631-367-9187 / Cold Spring Harbor, NY An electronics industry consulting firm, consulted by many of the leading systems houses, semiconductor companies, and the materials, components, and tool companies that enable electronic equipment to be manufactured. These companies use Prismark to plan their tactics and set their strategies in an industry that continues to undergo complex technological and structural change. - Great technology reports (KRB).
Professional Teleconcepts
607-337-7474 / Norwich, NY
Provides engineering, furnishing, and installation services to the telecommunications market, including design, provisioning and installation of switches, transmission and broadband equipment, power plants, CEVs and CEMHs, co-location cages, wireless, and most other telecom infrastructure equipment.
Protomold Company
763-479-3680 / Maple Plain, MN
Rapid injection molding service from your 3D CAD model in as little as 3 days, starting at only $1795. We manufacture molds exclusively using advanced aluminum alloys and high-speed CNC machining, and work in almost any engineering resin, support functional testing, bridge tooling or even ongoing production requirements for many applications.
QRC Technologies 540 446-2270 / Stafford, VA
Cellular survey and forensic tools, Turn-key system integration engineering. QRC has products used for phone forensics, base station location, mobile location (Direction Finding), and cellular system surveys. QRC tools cover CDMA, WCDMA, GSM, and iDEN protocols.
Qualcad Semiconductors
+91 9449017461 / Bangalore, Karnataka, India
Mask Design Services for design houses in India and abroad. The company boasts of experts in the field of Analog/RF layout design who have earned the reputation of being one of the best leaders in the industry in their respective area of expertise. Memory design, analog layout, RF layout, I/O ring layout, ESD protection scheme, full-chip layout, IP integration & verification, place & route. Corporate Training in Analog/RF layout design.
R.A. Wood Associates
315-735-4217 / Utica, NY
Engineering consulting services, computer automated test design & development, engineering prototypes & low rate manufacturing, RF/Microwave system design & analysis, subcontract specifications, wireless system design, custom software program development, LabVIEW software development, lectures & training classes, computer consulting services. Software: SpurFinder®, TunerHelper®, RFSpecTest®, PathLossSolver®, Painless Extraction®. Equalizers on Demand - amplitude flatteners.
703-548-6777 / Alexandria, VA
Consulting services for the satellite and microwave communications industry with a broad technical-business perspective and the depth of experience to solve real-world problems.
RCC Consultants, Inc
732-404-2400 / Woodbridge, NJ An international telecommunications consulting, integration, & outsourcing firm providing solutions to problems through the application of both wireless and wired communications and information technologies. Our work includes the analysis of user needs, budgeting, design, procurement support, deployment, and management of network infrastructure and/or services. Comsite comprehensive radio frequency engineering software tools.
RDO Labs
54 351 4110795 / Cordoba, Argentina
Outsourcing services to companies or individuals who need custom solutions. We have vast experience in analog and digital circuit design for control systems, wireless applications, custom embedded software and PC software solutions. In RDO we have professional staff in electronics, telecommunications and software - from simple products to complex systems design, large or small, we provide professional design, engineering, prototyping, and production files. Product redesign to make updates into the latest technological advancements, to reduce costs and/or to new regulation compliance.
Red Mountain Radio LLC
970-325-2158 / Ouray, CO
RF, optical, and microwave hardware design services, as well as Ph.D. level analysis. Our engineers understand the fundamental physics and theory behind radio, radar, and communications, and have the practical work-bench experience required to design market-ready products.
RemiTech
Rockwood, PA
Waveguide software - provides convenient and quick access to information on standard rigid wall rectangular waveguide data.
Resolution Engineering, Inc
651-269-2172 / Stillwater, MN
RF/wireless and embedded systems consultants with over 30 years experience designing quality, low-cost devices for wireless control, sensing, and data connectivity. We offer a broad array of contract engineering services, covering technologies such as RFID, ZigBee, and RKE. Our services span the entire development cycle, from design and prototype to worldwide regulatory compliance and production.
RelQual Associates
707-793-1195 / Rohnert Park, CA
Offers product evaluation & qualification services and full-service environmental testing.
Revolution Semiconductor
+90 542 255 4670 / Ankara, Turkey
Founded by Murat Eskiyerli, PhD to offer analog, mixed-signal and RF integrated circuit design consulting services to system and fabless semiconductor companies. RSL, through its international network of affiliates, is able to offer customized and cost-effective services to its diverse client base.
RF-ASICS
760-519-7045 / Vista,CA
A design and test center for RFIC's as well as RF systems and circuits. We have extensive experience in both the military/aerospace and commercial markets. Our experience covers a wide range of CMOS, BiCMOS, and Bipolar processes. We have over 60 years of combined experience producing highly integrated RFIC's. We have over 85 years of combined experience in communications electronics and related fields. RF systems design/architecture and discrete RF design. This is a great help to customers who need an RFIC but are not sure of the architecture and partitioning. This allows us to participate with your design team in a seamless manner.
RF Design
+49 2842 981 160 / Germany
RF Design - Hardware, product development, feasibility study, consulting, for GSM, GPRS, EDGE, UMTS, WLAN, DECT, BLUETOOTH, INMARSAT, ISM.
RF Engineering Inc.
416-596-1221 / Toronto, ON, Canada
Wireless design consultants. Specialists in the design and analysis of RF circuits, antennas, and systems. Our group of associates applies it's wealth of knowledge, practical experience, and creativity in the field of wireless technology to solutions for our international clients. 26 GHz laboratory. GSM, GPRS, GPS, WiFi, Bluetooth, ISM, RFID, DSP, ZigBee.
RF Engineering Consulting
949-244-1627 / Laguna Niguel, CA
Turnkey In-building System Solutions for the PCS/Cellular service provider systems for project sizes from 20K Sq.Ft. to >1M Sq.Ft. Design or Project Management services as well; RF Site Audits- Antenna Sweep Analysis, Special RF Configuration designs; Antenna System Simplification- Antenna Count Reduction to enable launch of new service platforms without additional antennas.
RF Exposure Lab, LLC
760-737-3131 / Escondido, CA
A privately owned independent SAR testing facility located in Southern California. We provide support to you by selling a total solution with both testing and design suggestions to insure your product can meet the testing limits.
RFIC Solutions
408-499-0846 / Milpitas, CA
Provides solutions for complex highly integrated RF SoC solutions, custom RFIC/MMICs based on GaAs, SiGe, CMOS and BiCMOS process for applications ranging from DC to 60GHz, and RF Modules and systems design services for WLAN, Wimax and cellular systems.
RF Microwave Design Ltd
+44 (0)1626 835269 / UK
Custom, semi-custom and standard passive microwave components. Diplexers, filters and antennas designed and tested. A complete design, development and validation service to the RF and microwave industry.
RFTek
919-622-4088 / Raleigh, NC
Consulting and contracting services for Electromagnetic Compatibility (EMC), Electrostatic Discharge (ESD): design, test and compliance.
Rommel Alilin and Associates
559-924-0773 / Lemoore, CA
Consultant, engineering, repair-restoration.
Russ Pittman, Consulting Inc
305-345-9300 / Homestead, FL
Satellite Communications Services - Network operations supporting NEW technologies - Web sites, and web-hosting services.
Sanders RF Consulting 919-387-2089 / Cary, NC
RF consultants with over 20 years experience in consumer and automotive product design, including wireless, cellular handsets (GSM/TDMA), cable system design and cable modems, car radios / automotive electronics, as well as HF/VHF transceivers, and remote keyless entry. Our designs consistently come in below cost targets and exceed performance requirements.
Scott Baxter & Associates
800-890-0829 / Nashville, TN
Scott Baxter is a CDMA2000 network and RF performance consultant and trainer. Consulting continuously since 1995, he has delivered CDMA training and performance optimization services in 40 US states, 5 Canadian provinces, and eleven other countries around the world.
SM Wirless Solutions
+919766918189 / Nagpur, Maharashtra, India
We offer design services in MMIC, RFIC, RF modules and RF systems. We have done 60 different designs covering DC to 40 GHz on various process like GaAs pHEMT, GaAs HBT, Silicon CMOS, SiGe BiCMOS, & GaAs MESFET provided by our foundry partners like TriQuint, Jazz, GCS, Tower, & TSMC. SM Wireless Solutions is a sister concern of RFIC Solutions, a fabless RFIC design house based in San Jose, CA.
Specialist Microwave Solutions Ltd
01234 756034 / UK
Manufactures a wide range of custom control devices based on Silicon PIN diode and GaAs MMIC technology, develops custom circuitry to specifications repairs 3rd-party components, offers PIN and GaAs FET switches, attenuators, amplifiers, oscillators, limiters, phase shifters, switched filter banks, & multi function assemblies.
Spectrum Integrity, Inc
805-426-4267 / Simi Valley, CA
RF PCB design, high-frequency test sockets, flex design, high-speed testing, PCB fabrication.
SRF Technologies
602-421-2003 / Queen Creek, AZ
Contractor/consultant for the semiconductor industry specializing in CMOS process and circuit design services for RF, analog, IO & ESD design.
Summit Semiconductor
310-980-3039 / Fullerton, CA
Provides design services and licenses IP for SiGe and GaAs integrated circuits for RF, microwave and millimeter-wave applications, and also provides IC backend processes management and design such as packaging, assembly, qualification, failure analysis and test.
Sunshine Design Engineering Services
Ramona, CA
Design Specialties - hardware, CAD and software engineering. Test Engineering Services - 20 years experience RF/Microwave and Semiconductor Parametric Test. Electronic Calculator - Multiple pages of calculators for capacitance, resistance, inductance, attenuation, microstrip, resonance, etc. Many astronomical calculators. RF Calculator: RF and RF Test calculations for design and analysis.
PnaCapture©: This program is a test automation tool for the Agilent PNA model Vector Network Analyzer. Connects GPIB and controls the testing, specification and report generation using excel worksheets for the ultimate in data accessibility. Also saves the data in ASCII delimited, S2P, SQL Server, SQL Server Express or Access data basing for the ultimate in flexibility. Uses the National Instrument GPIB Instrument Interface Buss Adapter.
Sypris Test & Measurement
800-775-2550 / Orlando, FL
Complete metrology solutions for calibration and repair of electrical, mechanical and process control instrumentation, testing and evaluation services, components.
Technology Service Corp
Provides engineering services and specialized products to U.S. Government agencies and private industry. Specialized products include sensor and subsystem prototype development and demonstration, electronic circuit board manufacture, test devices, computer applications for radar siting, geographic information services, and sensor/system modeling and simulation.
Telemakus, LLC
916-662-0458 / Folsom, CA
RF design services, contract engineering, contract product development. Specializing in linear feed forward power amplifiers, WiMAX transceivers, military radar amplifiers, mixed signal designs.
Telestrian Limited
+44 (0)1235-227236 / Wantage, Oxfordshire, UK
A UK based RF design consultancy offering RF module development, wireless design services, hire of the RF test facility and phase noise testing using the Agilent E5501B phase noise test system.
TelWorx Communications, LLC
336-956-1425 / Lexington, NC
Provides products, solutions, and technical services to the wireline, wireless and government sectors, including new, surplus, refurbished, consignment, and de-installed equipment, staging, kitting, consignment, asset recovery, EF&I, rack and stack and more.
Test Engineering Technologies
91-9496276116 / Kochi, India
Electronics manufacturing and test engineering consultancy. Design validation, manufacturing including DFM /DFT C, test engineering, fixtures, test line and test time optimization in mass production. RF engineering including wireless systems, telecom, avionics. Technical training for general electronics, digital electronics, RF, and EMI.
Triad RF Systems
732-310-9918 | Millstone Township, NJ
Your source for RF front ends, transceivers and amplifier systems that just plain work! Solutions for integrating high performance HPAs into sophisticated RF subsystems and systems without sacrificing efficiency and linearity.
Trigent
508-651-5900 / Natick, MA
Specializes in creating world-class technology solutions and custom applications for software companies, enterprises, and online business customers.
TV Magic, Inc
858-650-3155 / San Diego, CA
Full service broadcast and A/V company specializing in Engineering Design, Integration, Equipment Sales, Service and Support for a host of applications from broadcast to production to presentation systems and beyond.
UBC, Inc
813-884-6076 / Tampa, FL
Antennas and control systems, custom radar systems, research and development, microwave systems engineering, control systems development, guidance systems development.
USDigiComm Corporation
675-525-7402 / Alpharetta, GA
Specializing in radome design and development. Capabilities include creation of virtual models and incorporation of many advanced electrical RF features and characteristics that seem to elude most other defense and aerospace companies.
Validus Technologies
309-689-1406 / Peoria, IL
Technical consulting for embedded wireless devices, micro-power electronics, and energy harvesting.
Validus Technologies IT Consulting
703-728-0605 / South Riding, VA
Design, implementation, testing and maintenance of business applications.
Venture Technologies
978-667-9890 | North Billerica, MA
Broad product development experience with emphasis on integrating wireless capability into products. Focus within wireless is on stand-alone products, i.e. self powered either by harvesting energy from the environment or by using such small amounts of power that batteries can be sealed into the product. Our RFOS platform offers a fast entry for companies needing to bring wireless onboard quickly, cheaply and to out-perform standard solutions.
Vincent Electronics
734-347-2736 / Livonia, MI
Provides test equipment repair, product design, and prototype services. We are also experienced with custom test equipment (PC controlled) using the Agilent VEE language. We build stand-alone custom testers, and other embedded microcontroller devices using the Microchip PIC product.
Voler Engineering & System Integration
408-245-9844 / Sunnyvale, CA
We find the most cost effective solution, whether it's a custom design or the use of off-the-shelf components, provide high quality and long term support to keep your system running and you delighted, deliver on schedule, don't make you dependent on us by withholding design information, and give you complete information and documentation so you don't have to use our services. We do jobs from $1k to $1M.
Watson Engineering
608-442-1212 / Madison, WI
RF/wireless circuit design for low power unlicensed systems (FCC certified), low power battery operated portable devices, microcontroller systems, analog and sensor interface circuits, digital and PLD circuits. PCB design and layout. Prototype assembly. Design verification and test.
Wave Technology 513-265-5447 / Lebanon, OH
We do contract engineering in ALL phases of electronic engineering and electronic product development. We specialize in electronic product development... nearly anything! RF design, antenna design, antenna measurement, FCC consulting, microcontroller design (Atmel, Freescale, Microchip, Maxim, etc.), assembly & C software coding. Consumer, commercial and military electronics. Lectures, teaching classes and seminars PCB layout, including critical microwave and RF layouts! Initial prototypes to market your idea... need a "proof of principle" model to secure funding?
Wilmer Engineering, LLC
256-975-7309 / Huntsville, AL
RF, EMI & systems engineering consulting. 30 years experience in design, integration, test, project and program management.
Windfreak Tech
League City, TX
The Windfreak Synthesizer is a 137MHz to 4.4GHz software tunable, PLL synthesized RF signal generator, controlled and powered by a PC running Windows XP or Windows 7 via its USB port. Don't pay thousands for an old HP signal generator!
Zebryk Engineering
508-764-3855 / Southbridge, MA
Specializing in PIC microcontrollers and RF, we design and build wireless systems. With over 20 years of experience, we can substantially reduce your developmental risks and your time to market. Remote controls, irrigation controls, security systems, RFID, data acquisition, process controls, home automation, RF Telemetry, GPS & AVL, wireless sensors.
|
Kirt
