FDTD - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

gokul.talapa

Post subject: FDTD

Posted: Sat Sep 24, 2005 9:59 pm

hi,
can anyone of you sen dme the code to plot VSWR in matlab with voltage valued from FDTD code.

thanks alot in advance.
gokul.

UWB_antenna_guy

Post subject: Re: FDTD

Posted: Mon Sep 26, 2005 9:27 am

Colonel

Joined: Tue Aug 09, 2005 1:07 pm
Posts: 28

gokul.talapa wrote:

hi,
can anyone of you sen dme the code to plot VSWR in matlab with voltage valued from FDTD code.

thanks alot in advance.
gokul.

there are many ways to implement a source in FDTD, e.g., virtual transmission line, gap feed, magnetic frill...

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

LadyBug Technologies-LBSF09A Power Sensor - RF Cafe - RF Cafe