Power Divider at U band(40-60GHz) to feed antenna - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

luyang

Post subject: Power Divider at U band(40-60GHz) to feed antenna

Posted: Wed Feb 02, 2005 5:55 pm

Captain

Joined: Wed Feb 02, 2005 5:45 pm
Posts: 7

Hi, everyone,
I want to design a 8 way power divider working at U band with 10% bandwidth to feed the antenna because I cannot find a commercial one for such high freqency. But as the frequency increases, there are many problems, such as the size due to fabrication limitation. So if anyone who has some idea on how to design it, could you help me?
Thank you very much!

Lu

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Werbel Microwave power dividers, couplers - RF Cafe

RF Electronic Stencils Symbols Visio Shapes Office