Printed Yagi Simulation help (IE3D) - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

sag

Post subject: Printed Yagi Simulation help (IE3D)

Posted: Sat Apr 29, 2006 9:08 am

Captain

Joined: Wed Apr 05, 2006 3:34 pm
Posts: 6

Hay all,

I used IE3D to simulate the printed Yagi described at
"Unipolar wideband quasi yagi" article.
the result I got were not even close to those in the article!

can any of you have an idea why?

10x

Sag

jian

Post subject:

Posted: Tue Jun 20, 2006 1:10 pm

Lieutenant

Joined: Thu Sep 29, 2005 1:20 pm
Posts: 2
Location: Fremont, California, U.S.A

Please send your model to: support@zeland.com and we can help you.

_________________
jian

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Windfreak Technologies Frequency Synthesizers - RF Cafe

Anritsu MG36021A Microwave Frequency Synthesizer Module - RF Cafe