How to Add Phase Noise from Two Sources? - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

KevinW
Post subject: 2KW Notch Filter at 41.61MHz Posted: Wed Aug 05, 2009 11:59 am

Lieutenant

Joined: Wed Aug 05, 2009 11:40 am
Posts: 1
Does anybody know where I could get a couple notch filters for putting in the transmit path to notch out the receive freq? The high power amp puts out 2KW. We have used DB Products tall cans in the past, but they are no longer around. I have looked all over the place on the Web without success. Telewave makes some that take 500W, but they are not interested in designing one for 2KW.

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Innovative Power Products (IPP) RF Combiners / Dividers - RF Cafe