ADS simulation - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Andrei_Mosh
Post subject: ADS simulation Posted: Wed Feb 14, 2007 12:31 pm

Lieutenant

Joined: Mon Feb 05, 2007 8:41 am
Posts: 3
Hello,

I want to simulate a decoupling capacitor effect with ADS.

Which noise source should I use? Where can i find one?

Thanks.

Top

melkhouly
Post subject: Posted: Thu May 03, 2007 3:10 am

Captain

Joined: Thu May 03, 2007 2:55 am
Posts: 8
Location: Egypt
i don't know which one to chose , but u can use a white noise

in the lib browser u will find sources noise , u will find alot of sources there

_________________
Khouly

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Anatech Electronics RF & Microwave Filters - RF Cafe

Johanson Dielectrics Thin Film Substrates - RF Cafe