|
 |
Ground plane connection to DC supply ground - RF Cafe Forums
|
Shafique
Post subject: Ground plane connection to DC supply ground
Unread postPosted: Wed Mar 30, 2005 5:33 pm
I am using terminal
block connectors to bring DC power to my circuit operating at 1GHz,
the +ve terminal will attach to a PCB trace to provide biasing through
RF chokes to an amplifier and the -ve terminal will simply attach to
the ground plane, (its a double sided PC board). Will connecting the
power supply ground to the PCB ground plane in one location be enough?
******************
kent616
Post subject: need
schematic diagram of balanced amplifier...pls
Unread postPosted:
Mon Mar 28, 2005 1:52 am
Offline
Lieutenant
Joined: Mon
Mar 28, 2005 1:49 am
Posts: 1
need schematic diagram of balanced
amplifier for practice......
----> complete circuit
---->
result
----> ** component list (important)
Top
Profile
Guest
Post subject: Balanced amplifier schematics
etc.
Unread postPosted: Tue Mar 29, 2005 1:53 pm
Check Motorola
application notes - they often have complete designs for emulation.
Good Luck!
Posted 11/12/2012
|
|
|
|
|
