|
 |
PCB layout and design tutorials - RF Cafe Forums
|
EE major
Post subject: PCB layout and design tutorials
Unread
postPosted: Tue Jun 28, 2005 4:58 pm
Offline
Captain
Joined:
Sun Oct 31, 2004 2:24 pm
Posts: 5
Location: Orlando
Hi,
I've been trying to find material on PCB design and fabrication
online but without any luck. Any help would be appreciated.
Thanx
again...
Top
Profile
Guest
Post subject:
PCB Layout & Fab
Unread postPosted: Tue Jun 28, 2005 9:38 pm
Hi,
For PCB layout software and fabrication, try:
www.pcb123.com
www.free-pcb-software.com
www.expresspcb.com
I hope this is what you want - if not, could you be more specific?
Thanks, and
Good Luck!
Top
EE major
Post subject: hi again
Unread postPosted: Thu Jun 30, 2005 10:54
am
Offline
Captain
Joined: Sun Oct 31, 2004 2:24 pm
Posts: 5
Location: Orlando
Hi,
I need to construct a PCB
power amplifier (designed to handle PEP of 300W) for a coupling unit
topology, which in turn is to be used for Powerline Communication Networks.
There are PCB milling machines in my department.
I would like
to get some tips on implementing this high power PCB design (this is
my first time), any precautions to be observed and useful material online
or in the form of books.
Thanx again.. You have been really helpful..
EE major.
Top
Profile
IR
Post subject:
Unread postPosted: Thu Jun 30, 2005 1:03 pm
Offline
Site Admin
User avatar
Joined: Mon Jun 27, 2005 2:02 pm
Posts: 373
Location: Germany
Hello EE_Major,
The best advice I can give
you would be to go to Freescale website and find out an example for
an Evaluation Board (EVB) for an RF Power Transistor :!:
The
data sheet of the device usually contains the Bill of Materials of the
EVB including components values and also the PCB layout of the board
and the substrate it is made of. In many cases, the substrate being
used is ROGERS 4003/4350 but there are sometimes exceptions.
You can find a lot of useful information in their website.
Good
luck, should you need more information please let me know. :)
_________________
Best regards,
- IR
Top
Profile
EE major
Post subject:
Unread postPosted:
Thu Jun 30, 2005 4:43 pm
Offline
Captain
Joined: Sun Oct
31, 2004 2:24 pm
Posts: 5
Location: Orlando
Thanx once again...I'll
look into that and get back to you..
EE major
Posted 11/12/2012
|
|
|
|
|
