Copyright: 1996 - 2024
BSEE - KB3UON
RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling
2 MB. Its primary purpose was to provide me with ready access to commonly needed
formulas and reference material while performing my work as an RF system and circuit
design engineer. The World Wide Web (Internet) was largely an unknown entity at
the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps
while tying up your telephone line, and a nice lady's voice announced "You've Got
Mail" when a new message arrived...
All trademarks, copyrights, patents, and other rights of ownership to images
and text used on the RF Cafe website are hereby acknowledged.
My Hobby Website:
TEM Cell manual - RF Cafe Forums
RF Cafe Forums closed its virtual doors in 2012 mainly due to other social media
platforms dominating public commenting venues. RF Cafe Forums began sometime around
August of 2003 and was quite well-attended for many years. By 2010, Facebook and
Twitter were overwhelmingly dominating online personal interaction, and RF Cafe
Forums activity dropped off precipitously. If the folks at
phpBB would release a version with integrated
sign-in from the major social media platforms, I would resurrect the RF Cafe Forums,
but until then it is probably not worth the effort. Regardless, there are still
lots of great posts in the archive that ware worth looking at.
Below are the old forum threads, including responses to the original posts.
|-- Amateur Radio
Gripes & Humor
-- CAE, CAD, &
Test & Measurement
Post subject: TEM Cell manual Posted: Sun Aug 21, 2005 8:53
Joined: Sun Aug 21, 2005 8:47 am
Good day people.
I'm currently doing an undergraduate project
on EMC. I'm supposed to build a simple TEM Cell for the measurement
of radiated emission from IC. Anyone knows where to find a TEM Cell
manual or specification or something that may help? I try the web but
couldnt find any. Hope anyone can help me out.
TEM CellPosted: Mon Aug 22, 2005 8:10 pm
1. How big is the circuit you need to test (including pcb, fixtures,
2. What frequency range do you need?
two questions make a big difference!