Zero IF Mixer Simulation - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Guest_Can
Post subject: Zero IF Mixer Simulation
Unread postPosted: Sat Jan 29, 2005 8:02 pm

Hi All,
I was just wondering that anybody has an idea about how to simulate Zero-IF Mixer (RF-LO= 0Hz) using ADS or some other software.
I tried my with ADS but it is unable to do harmonic balance simulation for this kind of mixer.
I am using behavioral model from the ADS system's library.
Or is it possible to get these results by using Simulink.
I am really stuck at this point , so any help will be greatly appreciated.

N.B: i noticed in this forum there are quite smart guys, so i can hope for the best.

Regards,

Tony

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

RF Electronic Stencils Symbols Visio Shapes Office