|
 |
micro UHF transmitter schematic diagram - RF Cafe Forums
|
glider
Post subject: micro UHF transmitter schematic diagram
Unread postPosted: Tue Jan 18, 2005 10:10 am
Offline
Lieutenant
Joined: Tue Jan 18, 2005 9:41 am
Posts: 1
I need schematic
diagram of micro UHF Long Distance transmitter (bug), frequency near
398Mhz-400Mhz, PLL-quarz controlled, distance near 300m or more, battery
life about 5 days, Power: cell tablet CR2032(3V) x 1PCS or CR2450 (3V)
Li. SMD design. Could someone help with schematic?
I even find some
schematic:
http://hem.passagen.se/communication/buggtx.html
but it requires a some improvement, i.e:
1) Only one AF stage
should be enough for this
2) The problem with this setup is that
it can't produce wideband FM,
usable at the RM radio band (75KHz
swing).
3) The second problem is that to produce UHF signal with
this method
you require a large number of multiplying stages which
will need to be
aligned (tuned). Alignment can be very touchy mechanically
and a fall
on the floor can de-tune the trimmers. It is not a very
practical approach,
but it does work.
4) Another problem with
a large number of amplifier stages is that
a intermediate signal
can feed through to the output stage. This makes
the usual filtering
with LPF unpossible (since signal is under the carrier
in frequency).
What I would like is to improve this schematic in view of the mentioned
suggestions.
Posted 11/12/2012
|
|
|
|
|
