Honeywell - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

What is your opinion of Honeywell?
Good - I work for them now or have in the past 60% [ 6 ]
Bad - I work for them now or have in the past 40% [ 4 ]
Good - I have only dealt with them 0% [ 0 ]
Bad - I have only dealt with them 0% [ 0 ]
Total votes : 10
Author Message
Kirt Blattenberger
Post subject: Honeywell Posted: Thu Feb 09, 2006 9:12 am

Site Admin

Joined: Sun Aug 03, 2003 2:02 pm
Posts: 308
Location: Erie, PA
Please use your personal experience with Honeywell when voting in the poll.

Thanks.

_________________
- Kirt Blattenberger
RF Cafe Progenitor & Webmaster

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Innovative Power Products Passive RF Products - RF Cafe