RF Cafe Homepage
PCB Directory (Manufacturers)

Exodus Advanced Communications Best in Class RF Amplifier SSPAs

Axiom Test Equipment - RF Cafe

Please Support RF Cafe by purchasing my  ridiculously low-priced products, all of which I created.

RF Cascade Workbook for Excel

RF & Electronics Symbols for Visio

RF & Electronics Symbols for Office

RF & Electronics Stencils for Visio

RF Workbench

T-Shirts, Mugs, Cups, Ball Caps, Mouse Pads

These Are Available for Free

Espresso Engineering Workbook™

Smith Chart™ for Excel

Innovative Power Products (IPP) 90 deg Hybrid Couplers

RF/Microwave IC Design Engineer Opening with ViaSat - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Doug_F
 Post subject: RF/Microwave IC Design Engineer Opening with ViaSat
Posted: Fri Jan 28, 2011 3:28 pm 
 
Captain

Joined: Thu Jan 27, 2011 11:29 pm
Posts: 6
RF/Microwave IC Design Engineer (4879)

To apply: Please apply to requisition 4879 on our website: http://www.viasat.com/careers.

Location: Phoenix AZ

Job Responsibilities: Perform microwave/mixed-signal IC design of complex circuits. These circuits include: analog baseband, microwave (>5GHz) and digital subsystems such as: mixers, VGAs, LNAs, DACs, etc.
Perform custom IC design on SiGe and CMOS processes, particularly at 0.18um process technologies and below.
Independently plan and implement RF ICs from top-level floor planning down to complex microwave circuit blocks. Design circuits adhering to specifications and guidelines set by system level parameters.
Debug, Test, & Verification of the designed RF/microwave chipset(s) using equipment such as VNAs & Spectrum Analyzers.
Work closely and communicate with design and layout engineers on a day-to-day basis.
Assist with tapeout activities and deal with post-tapeout activities such as documentation
and archiving.
Full-chip design, layout, and simulation verification to meet a fixed scheduled tapeout date(s).

Experience/Skills Required Microwave/RF IC design experience.
Circuit/ASIC design in SiGe & CMOS process(es).
Design & verification using Agilent ADS and Cadence tools. Strong IC design skills in bipolar technologies.
Test/Measurement/Debug capability for microwave chipset(s).
Strong analytical and problem-solving skills.
Excellent communication skills & team collaboration.
Skills that are a plus:
Knowledge of design & verification in ADS.
Experience with EM simulator(s) (HFSS, Momentum, Sonnet).
Previous circuit design experience for frequencies above 10GHz.
Previous design experience in 0.18um Jazz SiGe process.
MSEE preferred.
Top Specific Skills Required: Experience in BiCMOS design using Cadence Virtuoso. Good understanding of RF/microwave circuit fundamentals. Experience with CAD tools such as ADS, Cadence and EM simulation tools. Good teamwork, communication and problem solving skills.
Citizenship requirements: US Citizenship Required
Travel Required: Up to 10 percent
Years of Experience Required: 8 plus years
Minimum Education Requirements: BA/BS
Employment Category: Full-time




Posted  11/12/2012
Innovative Power Products (IPP) 90 deg Hybrid Couplers
Werbel Microwave (power dividers, couplers)

ConductRF Phased Matched RF Cables - RF Cafe

Temwell Filters