Anyone having experience in Base Station for GSM/CDMA - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

Daver Malik

Post subject: Anyone having experience in Base Station for GSM/CDMA

Posted: Wed Apr 20, 2005 5:27 pm

Any help is appreciated.
Thank you

Bayo

Post subject: Experience in Base Station for GSM

Posted: Sat May 07, 2005 10:34 am

Captain

Joined: Fri Apr 29, 2005 8:37 pm
Posts: 6
Location: Kano, Nigeria

What do u need? Principles of operation or specific vendor documentation on BSS? I have Motorola, Alcatel, Ericsson, Huawei and other non-vendor specific doc.

_________________
Bayo

Daver Malik

Post subject:

Posted: Tue May 10, 2005 9:26 am

I need both - Principles of operation and specific docs.

Thank you
Daver

Posted 11/12/2012

RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling 2 MB. Its primary purpose was to provide me with ready access to commonly needed formulas and reference material while performing my work as an RF system and circuit design engineer. The World Wide Web (Internet) was largely an unknown entity at the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps while tying up your telephone line, and a lady's voice announced "You've Got Mail" when a new message arrived...

All trademarks, copyrights, patents, and other rights of ownership to images and text used on the RF Cafe website are hereby acknowledged.

My Hobby Website: AirplanesAndRockets.com

My Daughter's Website: EquineKingdom

Werbel Microwave power dividers, couplers - RF Cafe