Electronics World articles Popular Electronics articles QST articles Radio & TV News articles Radio-Craft articles Radio-Electronics articles Short Wave Craft articles Wireless World articles Google Search of RF Cafe website Sitemap Electronics Equations Mathematics Equations Equations physics Manufacturers & distributors LinkedIn Crosswords Engineering Humor Kirt's Cogitations RF Engineering Quizzes Notable Quotes Calculators Education Engineering Magazine Articles Engineering software RF Cafe Archives Magazine Sponsor RF Cafe Sponsor Links Saturday Evening Post NEETS EW Radar Handbook Microwave Museum About RF Cafe Aegis Power Systems Alliance Test Equipment Centric RF Empower RF ISOTEC Reactel RF Connector Technology San Francisco Circuits Anritsu Amplifier Solutions Anatech Electronics Axiom Test Equipment Conduct RF Copper Mountain Technologies Exodus Advanced Communications Innovative Power Products KR Filters LadyBug Technologies Rigol TotalTemp Technologies Werbel Microwave Windfreak Technologies Wireless Telecom Group Withwave Resources Vintage Magazines RF Cafe Software WhoIs entry for RF Cafe.com Thank you for visiting RF Cafe!
TotalTemp Technologies (Thermal Platforms) - RF Cafe

Innovative Power Products (IPP) Directional Couplers

LadyBug RF Power Sensors

Please Support RF Cafe by purchasing my  ridiculously low-priced products, all of which I created.

RF Cascade Workbook for Excel

RF & Electronics Symbols for Visio

RF & Electronics Symbols for Office

RF & Electronics Stencils for Visio

RF Workbench

T-Shirts, Mugs, Cups, Ball Caps, Mouse Pads

These Are Available for Free

Espresso Engineering Workbook™

Smith Chart™ for Excel

Temwell Filters

NASA: Experimental Payloads Selected for Commercial Suborbital Flights

This story was retrieved from the NASA website. Neither NASA nor any other entity represented in the article endorses this website.

March 21, 2012 RELEASE : 12-089

Experimental Payloads Selected For Commercial Suborbital Flights

WASHINGTON -- NASA's Flight Opportunities Program has selected 24 cutting-edge space technology payloads for flights on commercial reusable launch vehicles, balloons and a commercial parabolic aircraft.

Sixteen of the payloads will ride on parabolic aircraft flights, which provide brief periods of weightlessness. Five will fly on suborbital reusable launch vehicle test flights. Two will ride on high-altitude balloons that fly above 65,000 feet. One payload will fly on the suborbital launch vehicle and high-altitude balloon platforms. The flights will take place in 2012 and 2013.

Flight platforms include the Zero-G parabolic airplane, Near Space Corp. high altitude balloons and reusable launch vehicles from Armadillo Aerospace, Masten Space Systems, UP Aerospace and Virgin Galactic.

"NASA's Flight Opportunities Program leverages investment in commercially available vehicles and platforms to enable new technology discoveries," said Michael Gazarik, director of NASA's Space Technology Program at NASA Headquarters in Washington. "These flights enable researchers to demonstrate the viability of their technologies while taking advantage of American commercial access to near-space."

Payloads selected for flight on a parabolic aircraft are:
  • Microgravity Health Care," Scott Alexander Dulchavsky, Henry Ford Health System, Detroit
  • Activity Monitoring During Parabolic Flight," Peter Cavanagh, University of Washington, Seattle
  • Physics of Regolith Impacts in Microgravity Experiment," Josh Colwell, University of Central Florida, Orlando
  • UAH CubeSat Parabolic Flight Testing," Francis Wessling, University of Alabama, Huntsville
  • Fuel Mass Gauging Under Zero-G Environment Based on Electrical Capacitance Volumatric Tomography Techniques," Manohar Deshpande, NASA's Goddard Space Flight Center, Greenbelt, Md.
  • Microgravity Effects of Nanoscale Mixing on Diffusion Limited Processes Using Electrochemical Electrodes," Carlos Cabrera, University of Puerto Rico, San Juan
  • Effects of Reduced Gravity on Flow Boiling and Condensation," Issam Mudawar, Purdue University, West Lafayette, Ind.
  • OSIRIS-REx Low-Gravity Regolith Sampling Tests," Joseph Vellinga, Lockheed Martin Space Systems Company, Denver
  • Parabolic Flight: Validation of Electro-Hydrodynamic Gas-Liquid Phase Separation in Microgravity," Boris Khusid, New Jersey Institute of Technology, Newark
  • Non-Invasive Hemodynamic Monitoring in Microgravity," Gregory Kovacs, Stanford University, Stanford, Calif.
  • Parabolic Flight Evaluation of a Hermetic Surgery System for Reduced Gravity," George Pantalos, University of Louisville, Louisville, Ky.
  • Evaporative Heat Transfer Mechanisms within a Heat Melt Compactor Experiment," Eric Golliher, NASA's Glenn Research Center, Cleveland
  • Effects of Reduced and Hyper Gravity on Functional Near-Infrared Spectroscopy Instrumentation," Greg Adamovsky, NASA Glenn
  • Sintering of Composite Materials Under Reduced Gravity Conditions ("Cosmic" Project), Orazio Chiarenza, the Advanced Technical Institute, Fuscaldo, Italy
  • Boston University Student Proposal for Deployable Solar and Antenna Array Microgravity Testing," Theodore Fritz, Boston University
  • Particle Dispersion System for Microgravity Environments," John Marshall, SETI Institute, Mountain View, Calif.

    Payloads selected for flight on a suborbital launch vehicle are:
  • Near-Zero Gravity Cryogenic Line Chilldown Experiment in a Suborbital Reusable Launch Vehicle," Jacob Chung, University of Florida, Gainesville, Fla.
  • Collection of Regolith Experiment on a Commercial Suborbital Vehicle," and "Collisions Into Dust Experiment on a Commercial Suborbital Vehicle, Josh Colwell, University of Central Florida, Orlando
  • Polar Mesospheric Cloud Imaging and Tomography Experiment," Jason David Reimuller, Space Science Institute, Boulder, Colo.
  • Vision Navigation System Technology Demonstration," Douglas Zimpfer, Draper Laboratory, Houston

    Payloads selected for flight on a high altitude balloon are:
  • Flight Demonstration of an Integrated Camera and Solid-State Fine Steering System," Eliot Young, Southwest Research Institute, Boulder, Colo.
  • Initial Flight Testing of a UAT ADS-B Transmitter Prototype for Commercial Space Transportation Using a High Altitude Balloon," Richard Stansbury, Embry-Riddle Aeronautical University, Daytona Beach, Fla.
The "Structural Health Monitoring for Commercial Space Vehicles" payload from Andrei Zagrai of the New Mexico Institute of Mining and Technology in Socorro, will fly on a suborbital launch vehicle and a high-altitude balloon.

NASA manages the Flight Opportunities Program manifest, matching payloads with flights, and will pay for payload integration and the flight costs for the selected payloads. No funds are provided for the development of these payloads. Other suborbital flight vendors on contract to NASA will provide flights after they have successfully flown their qualifying vehicles.

The Flight Opportunities Program, part of NASA's Space Technology Program, is managed at NASA's Dryden Flight Research Center in Edwards, Calif. NASA's Ames Research Center at Moffett Field, Calif. manages the payload activities for the program.

For more information on the Flight Opportunities program, visit:

https://flightopportunities.nasa.gov

David E. Steitz
Headquarters, Washington
202-358-1730
david.steitz@nasa.gov

Leslie Williams
Dryden Flight Research Center, Edwards, Calif.
661-276-3893
leslie.a.williams@nasa.gov

Rachel Hoover
Ames Research Center, Moffett Field, Calif.
650-604-4789
rachel.hoover@nasa.gov


Posted  3/22/2012
Temwell Filters
PCB Directory (Manufacturers)

Noisecom

Innovative Power Products Passive RF Products - RF Cafe