RF Cascade Workbook for Excel
RF & Electronics Symbols for Visio
RF & Electronics Symbols for Office
RF & Electronics Stencils for Visio
RF Workbench
T-Shirts, Mugs, Cups, Ball Caps, Mouse Pads
Espresso Engineering Workbook™
Smith Chart™ for Excel
|
 |
Hittite Press Release - August 26, 2010
|
Hittite Releases 13 GHz High Speed Logic in Plastic SMT!
Ideal for High Volume, Low Jitter Communications, Test & Networking Applications
 Chelmsford,
MA, 08/26/2010 – Hittite Microwave Corporation, the world class supplier of complete MMIC based solutions
for communication & military markets has released four new high speed logic products to complement its growing
high speed logic product line. Operating with clock rates up to 13 GHz, and housed in plastic SMT packages, the
HMC720LP3E,
HMC721LP3E,
HMC722LP3E, and the
HMC723LP3E are ideal for deployment in high volume applications ranging from bench test equipment, ATE,
optical communications, medical and industrial systems to networking and military communications systems.
The
HMC720LP3E is a 1:2 Fanout Buffer, the
HMC721LP3E provides an XOR/XNOR gate function, and the HMC722LP3E
may be configured as an AND, NAND, OR or NOR gate. The
HMC723LP3E is a D-Type Flip-Flop which transfers data to its outputs on the positive edge of the clock during
normal operation. All four logic devices support single-ended or differential operation, provide data
transmission/clock rates up to 13 Gbps/13 GHz, and feature an output level control pin which allows for signal
loss compensation or signal level optimization. The differential input and output signals of the
HMC720LP3E,
HMC721LP3E,
HMC722LP3E, and the
HMC723LP3E are terminated on chip with 50 Ohm resistors to ground, and may be either AC or DC coupled. These
logic devices are also optimized for fast rise and fall times, low jitter and low DC power requirements. Typical
deterministic jitter is 2 ps, while random jitter is less than 0.2 ps rms. Typical rise and fall times are 19 ps
or less, while DC power consumption is less than 300 mW.
The
HMC720LP3E,
HMC721LP3E,
HMC722LP3E, and the
HMC723LP3E operate from a -3.3 V DC supply, are specified for operation from -40 °C to +85 °C, and are housed
in RoHS compliant, 3 x 3 mm plastic SMT packages. Sample and evaluation PC boards for all SMT
packaged products are available from stock. Released data sheets are available on-line at
www.hittite.com.
About Hittite
Hittite Microwave Corporation is an innovative designer and
manufacturer of analog, digital and mixed-signal ICs, modules, subsystems and instrumentation for digital, RF,
microwave and millimeterwave applications covering DC to 110 GHz. Our Digital/RFIC/MMIC products are developed
using state-of-the-art GaAs, GaN, InGaP/GaAs, InP, SOI, SiGe, CMOS and BiCMOS semiconductor processes utilizing
MESFET, HEMT, pHEMT, mHEMT, HBT and PIN devices. Our custom and standard products support a wide range of wireless
/ wired communications and radar applications for Automotive, Broadband, Cellular/4G, Fiber Optics, Microwave &
Millimeterwave Communications, Military, Test & Measurement, and Space markets.
Contact
Beth McGreevy
MarCom Manager
mcgreevy@hittite.com
Hittite Microwave Corporation
20 Alpha Road
Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
sales@hittite.com www.hittite.com
Posted 8/28/2010 |
|
|
 |
