|
100 MHz to 30 GHz Limiter Diodes Featuring Fast Turn-on Times and Low Insertion Loss
 Manchester,
NH – November 1, 2016 – SemiGen, Inc. (www.semigen.net), an ISO and ITAR registered RF/Microwave assembly, automated PCB
manufacturing, and RF Supply Center, has added a series of new limiter diodes to its expanding product
offerings, SLP7100 series.
The SLP7100 limiter diodes are processed with a high-resistivity epitaxial wafer (epi) that has thin
intrinsic layers. These devices are 2 to 20 microns thick and can be gold doped to achieve specific
performance goals. The SLP7100 limiter diodes are used in passive or active limiter designs in the 100
MHz to 30 GHz frequency ranges and feature a low capacitance and resistance as well as a turn-on time
as low as 5ns. These easily bondable limiters come with a maximum input power ranging from +47 dBm to
+66 dBm and a leakage output power from +19 dBm to +44 dBm. Typical insertion losses range from a low
0.10 dB to a maximum of 0.2 dB.
These limiters are ideally suited for high-power applications, radar, EW, and communications systems
as protection against unwanted power surges or spikes for low noise components. The SLP7100 series can
be supplied in chip form or in twenty different package varieties offered through SemiGen.
Visit the SemiGen Product Library to download a full datasheet on the
SLP7100 limiter diode
series.
About
SemiGen is a leading RF/microwave solutions company that provides manufacturing services and products
to fill the voids in the supply chain and manufacturing floor. SemiGen's design and manufacturing center
includes RF/microwave assembly, PCB, box build, module repair and test services coupled with the semiconductor
devices and manufacturing supplies needed for successful products in the RF/Microwave hybrids and components.
Their team helps with designs, builds prototypes, and handles volume production runs for the RF/microwave,
military, space, homeland security, optical, medical device, and commercial wireless markets. Their
17,000 square foot facility includes a class 10,000 clean room and offers manual to full automatic assembly
for any manufacturing challenge. The company was founded in 2009 and is based in Manchester, NH. For
more information, visit http://www.semigen.net
Company Contact:
Jim Morgan
SemiGen, Inc.
jmorgan@semigen.net
Phone: 603-624-8311
Posted November 4, 2016
|
