|
High Quality Yet Low Cost!
 Port Richey, Florida, November 5, 2020 –
Windfreak Technologies announces the availability of the new
SynthUSB3 RF Signal Generator. The SynthUSB3 thumb drive sized
RF Signal Generator is designed for extremely high quality to cost ratio. These
devices have set the bar on microwave radio frequency generators for quality, size
and price. As always, our products are designed, manufactured and supported in the
USA - and it arrives already calibrated!
Tune any frequency between 12.5 MHz and 6.4 GHz in 0.01 Hz resolution.
Adjust calibrated amplitude in 0.2 dB resolution up to +8 dBm and across
more than 50 dB of range. Expect excellent performance and high reliability
despite the SynthUSB3's low cost.
Download
SynthUSB3 datasheet here.
After almost 10 successful years, the SynthUSBII gets a huge upgrade
to SynthUSB3:
-
Windfreak Technologies SynthUSB3 LabView GUI
Amplitude calibrated for high amplitude accuracy
- Great phase noise across all frequencies
- 0.01 Hz tuning capability (0.1 Hz default)
- 500 point frequency and amplitude hop table
- Up to 0.2 dB amplitude resolution
- Up to +8 dBm RF power
- Linear (or %) sweeping and list mode hopping both frequency and amplitude
- Control with USB or UART from your embedded microcontroller
- Trigger sweeps, hops, pulses etc.
- Internally or externally modulate FM, AM or pulse
- Windows, Linux and Android compatibility
- Save all settings to the device for use without a PC
- 32 bit ARM processor on board which is Arduino compatible
- Designed and manufactured in the USA with maximized value / cost ratio
Applications
- Wireless communications systems
- RF and Microwave radios
- Software Defined Radio (SDR)
- Radar
- Automated Test Equipment (ATE)
- EMC - radiated immunity pre-compliance testing
- Electronic Warfare (EW)
- Law Enforcement
- Quantum computing and device research
- Plasma physics
- Medical research and treatment
About Windfreak Technologies
Windfreak Technologies provides low cost, quality, innovative RF products that
are used in a wide range of highly technical applications. Since the conception
of Windfreak, our products have been purchased by a wide range of customers from
around the world. Customers include hobbyists, education facilities, and government
agencies. Our continued commitment is to keep our overhead extremely low, enabling
us to provide high quality, low cost, Made-in-the-USA products. For more information
about Windfreak Technologies' products or the website, please contact David Goins
at 1+ (727) 490-8812 or email:
dgoins@windfreaktech.com.
 Contact
Info:
David Goins, CTO Windfreak Technologies, LLC New Port Richey, Florida 34652
Office: +1 (727) 490-8812 URL: www.windfreaktech.com Email:
dgoins@windfreaktech.com
Posted November 9, 2020
|
