|
Planar Monolithic Industries (PMI) recently introduced six new products in their
extensive line of RF and microwave components. Included are a DC to 40 GHz
absorptive, SPST PIN diode switch; a 110 to 210 MHz frequency discriminator;
a 0.5 to 18.0 GHz non-reflective, 10 bit, 60 dB PIN diode attenuator;
a 160 MHz frequency discriminator; a 0.1 to 50.0 GHz SP8T absorptive switch;
and a 26.5 to 40.0 GHz, passive amplitude equalizer with a negative slope.
Contact PMI today for more information.
 PMI Model No. P1T-DC40G-65-T-24FM-1NS,
SP1T Absorptive Switch
PMI Model No.
P1T-DC40G-65-T-24FM-1NS
is an Absorptive, Single Pole, Single Throw Pin Diode Switch that operates from
DC to 40 GHz with Isolation of 65 dB; Insertion Loss of 5.5 dB; VSWR
of 2.0:1; Input Power of +17 dBm; and Switching Speed of 5 ns, Rise/Fall
Time of 0.9 ns. This model uses DC Voltage of +8 to +15 V @ 15 mA,
-8 to -15 V @ 40 mA, incorporates a TTL compatible driver for ease of
system integration and has 2.4 mm female connectors in a housing measuring
1.30" x 1.20" x 0.50".
 PMI Model No. FD-160M-100M-1515,
Frequency Discriminator
PMI Model No.
FD-160M-100M-1515
is a frequency discriminator that operates at a center frequency of 160 MHz.
Operating Frequency is 110 to 210 MHz; Sensitivity into 50 Ohms of 9.5 to 10 mV/MHz;
Linearity @ 25°C of ±3 %, @ 0°C to 60°C of ±5 %; Input Dynamic Range of -10 to 0 dBm;
Input VSWR of 1.5:1; and a Video Out vs. Input Frequency of 1 V. This model
uses DC Power Supply of +15 V @ 400 mA, -15 V @ 400 mA contains SMA female
connectors in a housing measuring 4.63" x 1.50" x 0.47".
 PMI Model No. DTA-0R5G18G-60-CD-4,
10-Bit Programmable Attenuator
PMI Model No.
DTA-0R5G18G-60-CD-4
is a non-reflective, 10 bit, programmable 60 dB pin diode attenuator with step
resolution as low as 0.06 dB over the frequency range of 0.5 to 18.0 GHz.
Insertion Loss of 4.8 dB; VSWR of 2.0:1; Flatness up to ±3.0 dB; Accuracy
of Attenuation of ±2.0 dB; Operating Power of 15 dBm; Survival Power of
1 W; and Switching Time On/Off of 1.0 µs/0.5 µs. This model uses DC Power
Supply of +15 V @ 150 mA; contains SMA female connectors and 15 Pin Micro-D
female connector in a housing: 2.00" x 1.80" x 0.40".
 PMI Model No. GMDA-D1003,
DLVA
PMI Model No.
GMDA-D1003 is a Detector Log Video Amplifier (DLVA) that operates between
the 7.0 to 18.0 GHz frequency range with a dynamic range of 75 dB; a log slope
of +25 ± 1.0 mV/dB; Logging Linearity of ±1.0 dB; Flatness of 100 mV; RF Safe
Input Power of +23 dBm; Max Output Voltage of +2.5 V; Input VSWR of 2.5:1; Video
Rise Time of 30 ns; Recovery Time of 1 µs; Throughput Time of 30 ns; Video
Bandwidth of 10 MHz and Offset Voltage of 50 mV and a nominal video bandwidth of
12 MHz. Designed using cutting edge GaAs technology which provides stunning
performance and reliability in a compact package 3.00" x 2.90" x 0.50" with SMA
female connectors.
 PMI Model No. P8T-100M50G-90-T-RD,
SP8T Absorptive Switch
PMI Model No.
P8T-100M50G-90-T-RD
is a SP8T Absorptive Switch that operates over the 0.1 to 50.0 GHz frequency
range with a typical insertion loss of 9.0 dB; a typical isolation of 90 dB;
VSWR is 2.2:1 Typ @ 18.0 GHz, 2.5:1 Typ @ 40.0 GHz, 3.5:1 Typ @ 50.0 GHz;
input power, 20 dBm CW maximum, and maximum switching speed, 50 ns. This
model incorporates a TTL compatible driver for ease of system integration and has
2.4 mm female connectors in a housing measuring 1.60" x 1.68" x 0.40".
 PMI Model No. EQL-26D5G40G-1D5DB-292MF,
Passive Amplitude Equalizer
PMI Model No.
EQL-26D5G40G-1D5DB-292MF
is a 26.5 to 40.0 GHz, Passive Amplitude Equalizer with a negative slope. Specification
include Maximum Input Power of 0.5 W CW; VSWR of 2.0:1; Insertion Loss of 1.5 dB;
Slope of 0.41 ± 0.06 dB/GHz; and Amplitude Accuracy of ±0.5 dB. This model
has 2.92mm male/ female connectors and housing: 1.10" x 0.67" x 0.22".
About Planar Monolithics Industries (PMI)
Planar Monolithics was founded basically to take advantage of the growing demand
in monolithic-based products using the hybrid MIC/MMIC technology innovations that
are mushrooming in a big way all over the world. High performance and reliable products
can be obtained by using this technology. Planar Monolithics will meet these requirements.
Planar Monolithics organization has been setup to design, develop, manufacture,
test, and market complex state-of-the-art hybrid RF/microwave and monolithic integrated
circuits (MIC/MMIC) and components, and hybrid MIC/MMIC supercomponents and subsystems.
Planar Monolithics provides its unique products for applications in space, military,
communications, telecommunications, commercial, and consumer electronics systems.
Contact:
Sebastian Palacio
VP & General Manager
Quantic PMI (Planar Monolithics)
7311-F Grove Road
Frederick, Maryland 21704, USA
CAGE Code: 05XQ0
Phone: (301) 662-5019
Cell: (301) 455-9897
E-Mail:
sales@pmi-rf.com
Website: https://www.pmi-rf.com
Posted January 27, 2022
|
