|
PMC-9D5G10D5G-7D6-SFF,
Monopulse Comparator
General Parameters:
- Frequency Min: 9.5 GHz
- Frequency Max: 10.5 GHz
- Phase Balance: ±5° Max
- Insertion Loss: 7.6 dB Max
- Isolation: 20 dB Min
- Frequency: 9.5 to 10.5 GHz
- Amplitude Balance: ±0.5 dB Max
- VSWR: 1.5:1 Max
- Impedance: 50 Ohm s
- Power Handling: Average: 10 Watt Max (Ports A, B, C & D), Peak: 0.1 kW
Max
- Connectors: SMA Female
- Finish: Painted Blue
- Size: 3.48" x 3.48" x 0.43", 88.49 x 88.49 x 11 mm
- Temperature: -55°C to +85°C (Operating), -65°C to +125°C (Storage)
 Planar Monolithic Industries (PMI),
a leading supplier of custom, high-reliability MIC/MMIC components and subsystems
for applications in space, military, communications, commercial and consumer electronics
systems for more than three decades, recently introduced. PMI is proud to introduce
model PMI Model No.
PMC-9D5G10D5G-7D6-SFF
is a Monopulse Comparator operating over the 9.5 to 10.5 GHz frequency range.
This model offers a maximum 7.6 dB insertion loss while maintaining a maximum
amplitude balance of ±0.5 dB; a maximum phase balance of ±5°, isolation of
20 dB, VSWR of 1.5:1, and Average Power Handling of 10 W. Housing is 3.48"
x 3.48" x 0.43" and has SMA Female Connectors. Contact PMI today for more information.
About Planar Monolithics Industries (PMI)
PPlanar Monolithics Industries, Inc., was founded by entrepreneurial technocrat
Dr. Ashok (Ash) Gorwara on November 11, 1989. For over three decades, PMI has been
a leading supplier of custom, high-reliability MIC/MMIC components and subsystems
for applications in space, military, communications, commercial and consumer electronics
systems.
Today, PMI with Quantic's leadership, continues to carry on the legacy of its
founder, Dr. Ash by expanding the applications of RF/Microwave components and subsystems
into new, low cost, RF/Microwave receiving and transmitting systems for both civilian
and military customers.
PMI was founded basically to take advantage of the growing demand in monolithic-based
products using the Hybrid MIC/MMIC technology innovations that are mushrooming in
a big way all over the world. High performance and reliable products can be obtained
by using this technology.
A vacuum exists in the demand for state-of-the-art Hybrid MIC/MMIC Components
and Subsystems. Planar Monolithics will meet these requirements.
Contact:
Sebastian Palacio
VP & General Manager
Quantic PMI (Planar Monolithics)
7311-F Grove Road
Frederick, Maryland 21704, USA
CAGE Code: 05XQ0
Phone: (301) 662-5019
Cell: (301) 455-9897
E-Mail:
sales@pmi-rf.com
Website: https://www.pmi-rf.com
Posted March 22, 2022
|
