|
Here are 2019 press release archive pages:
1 |
2 |
3 |
4 |
5
 ThinkRF Corporation, the leader in software-defined
spectrum analysis, today announced the new
ThinkRF
D4000 RF Downconverter. The platform is the industry's first 40 GHz downconverter,
allowing engineers to quickly and reliably analyze the new 5G wireless standard
by extending the range of their existing RF test equipment. To leverage the performance,
latency, and capacity that 5G promises, you need equipment which can properly analyze
the higher frequencies and wider bandwidths of these new signals. This portable,
plug-and-play ThinkRF downconverter allows mobile operators and military systems
integrators (SIs) to easily upgrade ...
 MECA Electronics, Inc., a leading supplier
of passive RF, microwave, and mm-wave products for public safety, wireless, 5G cellular,
military, and VSAT/SATCOM, has introduced a 380 MHz to 2.700 GHz, 30 watt
average power (5 kW peak) 50 Ω termination with very low passive intermodulation
(PIM) specifications. The model
LPT30-4310M is rated
for -161 dBc PIM (typical) at 30 watts. It is verified at 1900 MHz at -155 dBc
minimum. Thermally compensated to handle full rated power to 85°C. N-type connector
standard ...
 "At next week's annual Association of Old
Crows (AOC) Symposium, Teledyne Defense Electronics (TDE) will be featuring its
latest advancement in VPX modular technology, a
66U VPX Transceiver with the
fastest tuning and lowest phase noise performance available on the market today.
Teledyne developed the Transceiver on a modular platform to address the industry's
interest in compressing development cycles and planning for technology insertion
in program life extensions. This broadband 6-18 GHz VPX card is ideal for meeting
the increasingly demanding requirements of today's microwave Transceiver applications
in an open systems-based platform. In addition to its new standard-setting phase
noise and tuning performance levels, the 6U Transceiver offers a high dynamic ..."
 Anatech Electronics offers the industry's
largest portfolio of high-performance standard and customized
RF and microwave
filters and filter-related products for military, commercial, aerospace and
defense, and industrial applications up to 40 GHz. In their mid-October Product
Update, Anatech has introduced a 1000-4000 MHz 2-way power divider with SMA
connectors, a surface mount 4400-5000 MHz isolator, and a 2 dB 1 watt
SMA attenuator. Custom RF power directional coupler designs can be designed and
produced when a standard cannot be found, or the requirements are such that a custom
approach is necessary ...
 Custom MMIC, a leading designer and manufacturer
of high performance monolithic microwave integrated circuits (MMICs), is proud to
be this year's recipient of the
Massachusetts Manufacturer of the Year Award for Eastern Massachusetts Middlesex
District. Over the past four years this prestigious award has been presented to
those companies that embody the entrepreneurial spirit and passion for continued
growth using innovation and determination as their guiding principles. This award
is especially gratifying knowing Massachusetts is home to so many unique and successful
small businesses pushing the boundaries of what is possible every day. "Custom MMIC
was founded in 2006 on the three basic tenets of innovation, integrity and quality.
To this day we carry on those ...
 Atenlabs announces the availability of a
large variety of antenna measurement systems. Atenlab has developed four major categories
of Over-the-Air (OTA) measurement
systems to meet various requirements - A2 light type, A3 compact type, A6 standard
type and A8 professional type. OTA measurement system is in widely used in communication
and devices manufacturing industry, With the advancement of the OTA measurement
system, customers are able to perform more comprehensive measurement and test, staying
ahead in the market. Compact Antenna Test Ranges (CATR) are able to measure up to
100 GHz. The larger the compact range reflector, the larger Network Analysis
the Device Under Test (DUT) ...
 Advanced Test Equipment Corporation (ATEC)
announced a new agreement was reached and contracts executed between L3 Harris's
Narda STS group and ATEC, making ATEC the North American distributor and the
only authorized service center for calibration and repair of Narda STS and PMM equipment.
ATEC is a worldwide leader in test equipment rentals, sales and calibrations, providing
companies with equipment that meets all types of testing and monitoring requirements.
ATEC partnered with Narda STS, the leading supplier of measuring equipment in the
EMF Safety, RF Test & Measurement and EMC sectors. The RF Test & Measurement
sector provides analyzers and instruments ...
 VidaRF, a manufacturer of high performance
RF and microwave high performance circulators, isolators, couplers, power dividers,
and other passive components, has expanded its line of
broadband directional
couplers to cover 2 to 40 GHz for all wireless applications from cellular
through 5G mm-wave with 2.92 mm interfaces. Features include 10, 16, 20 and
30 dB coupling values, low VSWR, high directivity, broadband operation, compact
size, and operating temperature range of -55°C to +85°C. Sealed and painted to meet
IP65 standards. Custom designs to meet your needs are available ...
 "Keysight Technologies announced the
PathWave Test
2020 software suite, which delivers an integrated experience for leading electronic
manufacturers to accelerate time-to-market of their digital and wireless platforms
and products. Developed on the Keysight PathWave software platform, the PathWave
Test 2020 software suite enables 5G, IoT and automotive engineers and managers to
streamline test data processing and analysis to speed product introductions and
secure a competitive advantage in the market. PathWave Test 2020 software provides
data sharing and management between platform software tools including test automation,
advanced measurement, signal creation and generation ..."
ARRL Handbook for Radio Communications
 Both the
ARRL Radio Communications Handbook and the
ARRL Antenna Handbook (2020 editions) have grown
so large with information that they are being been made available as a set of volumes
that make handling and storing them much more convenient. The six volumes are divided
by major topic areas: Volume 1: Introduction & Fundamental Theory Volume 2:
Practical Design & Principles PART 1 Volume 3: Practical Design & Principles
PART 2 Volume 4: Antenna Systems & Radio Propagation Volume 5: Equipment Construction &
Station Accessories Volume 6: Test Equipment, Troubleshooting, RFI and Index. This
97th edition of The ARRL Handbook is your complete guide to radio experimentation,
discovery, and innovation ...
 Empower RF Systems'
Model 2226 is a compact high power GaN solid state CW emitter designed for GPS
denial and is based on the established and field proven Next Generation system architecture.
This architecture is tactically deployed and operating on multiple levels in support
of a variety of critical DOD missions. Equally suited for Jamming, Threat Simulation,
Multipaction, HIRF, and Automotive EMC applications the 2226 comes complete with
internal DDC, external forward and reverse sample ports, and an easy to use web
served GUI. In depth health monitoring with alarms visible on the front panel are
also pushed out the LAN port. Output modes include Manual Gain Control (MGC), AGC
and ALC ...
 Skyworks is pleased to launch the
SKY66405-11,
a 2.4 GHz front-end module (FEM) designed for ZigBee®, Thread, and Bluetooth® (including
Low Energy) ultra-low power IoT applications spanning sensors, beacons, smart meters
and thermostats, wireless cameras, smoke and CO detectors, wearables and medical
wearables. This high-performance, integrated multi-chip module comes in a compact
form factor (1.9 x 1.9 x 0.56 mm) and provides increased efficiency as well as more
than 4X range extension versus system-on-chip (SoC) alone. The solution includes
a power amplifier, low-noise amplifier, low-loss bypass path, transmit and receive
switches ...
 Withwave has introduced a new line of
High Speed & High
Density Multicoax Cable Assemblies (WMX Series) that provide a wide range of
multiple coax connectors and flexible cable assemblies with a choice of 20, 40,
50, and 67 GHz configurations based on precision array design and superior
high frequency cabling solutions. The WMX Series are excellent signal integrity
solutions for bench-top testing and automated test equipment to meet increasing
demands of semiconductor test equipment and optical testing industries. These products
consist of high performance flexible assemblies which can be bundled in housings
(8 and 16 channels) and the interface to board is compression type ...
 Exodus Advanced Communications is pleased
to introduce our high power 10 kHz to 100 MHz 1000-watt, class A/AB linear
LDMOS, rack mountable amplifier.
Exodus AMP2080E-1 produces 1000 W minimum, >1100 W nominal power,
P1dB 700 W typical. The minimum power gain is >60dB with excellent gain
flatness. Included are amplifier monitoring parameters for Forward/Reflected power,
VSWR as well as voltage, current & temperature sensing for optimum reliability &
ruggedness for all applications. Nominal weight is 120 lbs., and dimensions
of 19"W x 30"L x 17.5"H. Optional Rack integration ...
 Sam Benzacar of Anatech Electronics, an RF
and microwave filter company, has published his September newsletter that features
his short op−ed entitled "Coming: Plasma Antennas."
Plasma antennas have been appearing in the news items I collect, and Sam does a
pretty good job summarizing their operation and benefits. One feature I do not recall
seeing elsewhere is that in the "off" state, the plasma antenna presents a very
small radar cross section (RCS), which is strategically advantageous for stealth
aircraft (and surface ships). In other news, Sam includes other news related to
our RF industry ...
 Teledyne e2v HiRel announces the availability
of a rad-tolerant
60 GHz, Single Pole Double Throw (SPDT) reflective RF switch, model TDSW0602T,
that is ideal for use in high reliability, demanding space and defense applications.
This new RF switch, developed with Silicon-on-Insulator (SOI) technology, will be
available as flip chip die and is screened per MIL-PRF-38534 Class K for space applications.
Until now, rad tolerant 60 GHz switch technology has only been available for
less rigorous commercial application requirements. This product leverages monolithic
microwave integrated circuit (MMIC) design techniques that deliver unprecedented
performance in the K and Ka microwave and millimeter-wave bands ...
 Withwave has introduced a line of
SMPM connectors
which cover a wide frequency range from RF to microwave with excellent frequency
performance and high density. The proprietary internal insulator enables a simpler
structure with higher performance compared to the conventional SMPM connectors.
The best applications could be 5G complex mobile communications modules, satellite
systems and various other wireless systems. Frequency range: DC to 26.5 GHz &
67 GHz, push-on mating for quick installation, high density SMT packaging available ...
 Axiom Test Equipment, an electronic test
equipment rentals and sales company, has published a blog post entitled "Pack
a Punch for High-Power Semiconductor Device Testing," explaining how to source
the right electronic load for your next project. Semiconductor devices are rapidly
gaining in output-power capabilities, whether used in continuous-wave (CW) circuits
or in pulsed applications. Because they have continued to increase power levels
while remaining at such smaller sizes, power semiconductors have made vacuum-tube
devices such as klystrons, magnetrons, and travelling-wave tubes (TWTs) all but
forgotten except for designs at the highest power levels. But packing so much ...
 Copper Mountain Technologies is announcing
the release of the new
SC Series Compact VNAs for 2-port 2-path measurements. The SC Series network
analyzers feature a 140 dB dynamic range, 15 dBm output power, and a typical
measurement speed of 16 µs per point. The SC Series is the latest addition
to CMT's Compact line of VNAs and includes the SC5065 and SC5090. Both instruments
have a starting frequency of 300 kHz, the SC5065 goes up to 6.5 GHz and
the SC5090 goes to 9 GHz. All CMT VNAs include excellent customer service,
automation support, and years of engineering expertise at your disposal ...
 "Modelithics is pleased to announce the release
of the newest version, version 19.3, of the
COMPLETE
Library for use with NI AWR Design Environment software platform. This update
includes 65 new models. Designers will be thrilled with the new release of the Modelithics
COMPLETE Library for NI AWR Design Environment, specifically Microwave Office circuit
design software. The addition of 65 new models significantly increases the library
content, with the library now representing over 17,000 components. New Microwave
Global Models™ for passive components are available for Coilcraft, DLI (Knowles),
Exxelia, and Syfer (Knowles), including ten new ferrite beards, seven capacitors
and two inductors for Würth Elektronik. This release also includes three new resistors
and five attenuators ..."
 Anatech Electronics, Inc. offers the industry's
largest portfolio of high-performance standard and customized RF and microwave filters
and filter-related products for military, commercial, aerospace and defense, and
industrial applications up to 40 GHz. Anatech has introduced three new
directional coupler
designs: a 0.5-26.5 GHz, 30 dB directional coupler that handles up
to 20 watts, a 0.5-100 MHz, 30 dB directional coupler for up to 3 watts,
and a 300-8000 MHz, 20 dB directional coupler for up to 20 watts. Custom
RF power directional coupler designs can be designed and produced when a standard
cannot be found, or the requirements are such that a custom approach is necessary.
 ConductRF is the brand name for Electronic
Assemblies Manufacturing, Inc.'s, complete range of RF interconnect products. ConductRF
products include solutions for both commercial and precision RF applications for
both RF cable assemblies and connectors. Our manufacturing
capabilities include solutions built at our ITAR registered facility in Methuen
as well as partner facilities in the U.S. and around the world. ConductRF offers
cost effective equivalent and improved RF solutions to all major interconnect manufacturers,
specializing in phase stability over temperature ...
 QuinStar Technology was recently certified
for
flight hardware testing by Jet Propulsion Laboratory (JPL). After administering
the JPL System Safety Survey and Vendor Chamber Verification Survey, JPL certified
QuinStar's thermal vacuum chamber for testing flight hardware for JPL/NASA missions.
The chamber enables hardware testing under a simulated space environment. The 6.5
cubic ft. (0.2 cubic meter) chamber handles a temperature range of -100°C to 150°C
and achieves a vacuum level of 5 x 10-7 torr. In addition to the thermal
vacuum chamber, QuinStar's environmental test lab includes thermal, shock, vibration,
and humidity testing capabilities. With these testing processes, our class 10,000
clean room, in-house design and fabrication capabilities ...
 Skyworks Solutions is excited to share that
we were just honored as a
Top 50 Employer
by STEM Workforce Diversity magazine in their 18th annual ranking of U.S.
firms. Based on the magazine's reader survey, the list recognizes the top companies
who provide a positive work environment for diverse groups and people with disabilities
in the science, technology, engineering and math professions. We are proud to promote
diversity through inclusion of all employees - empowering them to help shape the
future of wireless through collaboration and innovation. To see our past recognitions
and awards, please visit the Awards page on our website.
 Anatech Electronics offers the industry's
largest portfolio of high-performance standard and customized RF and microwave filters
and filter-related products for military, commercial, aerospace and defense, and
industrial applications up to 40 GHz. Anatech has introduced three
power divider /
combiner designs: a 4-way version covering 1-40 GHz that handles up to 20 watts,
an 8-way version for 0.5-18.0 GHz and 30 watts, and a 16-way version for 800-960 MHz
for up to 10 watts. Custom RF power combiner / divider designs can be designed and
produced when a standard cannot be found, or the requirements are such that a custom
approach is necessary.
 Electro-Photonics LLC, a market leader in
RF and Microwave components, announces the availability of an
SMA connectorized
hybrid coupler: Q3XP-10000R-SMA. Our new Q3XP-10000R-SMA 90° hybrid coupler
operates from 2-18 GHz, dissipates 20 W, and offers excellent coupling
flatness and isolation for the most critical applications. Applications include
signal splitting / combining, antenna beam-forming networks, balanced amplifier
circuits, and I/Q modulators / demodulators. This coupler has an extremely small
package of 1.85 x 1.39 inches (47 mm x 35.29 mm). The Q3XP-10000R-SMA
is RoHS compliant.
 Planar Monolithic Industries (PMI) recently
introduced six new products in their extensive line of RF and microwave components.
Included are a successive detection log video amplifier (SDLVA) for 0.1 to 2.0 GHz;
a 18 GHz, 12-BIT, vector phase shifter; a digital frequency discriminator (DFD)
for 20 to 18.0 GHz, a 100 MHz amplified 8-way power divider, a 7-bit programmable
attenuator for 1.0 to 18.0 GHz, a 0.1 to 50.0 GHz SP16T absorptive switch, and a
Frequency Discriminator for 0.5 to 1.5 GHz. Contact PMI today for more information ...
 Sam Benzacar of Anatech Electronics, an RF
and microwave filter company, has published his September newsletter that features
his short op−ed entitled "Interference: 5G Hits
a Snag." He mentions the unavoidable issues that are being faced by telcos trying
to deploy their 5G infrastructure that operates in the millimeter-wave bands. The
two most notable difficulties are that of expensive equipment costs and relatively
short propagation distances (per Mr. Friis' equation). It is the latter that
is partly responsible for the former difficulty because shorter ranges translate
to needing more closely spaced cells. Re-allocation of some existing bands is inevitable,
which worries Hams more than just a little since their spectrum privileges seem
to uninformed bureaucrats to be ...
 Linx Technologies, a Merlin, OR based developer
and manufacturer of antennas, is pleased to introduce the
Splatch® SP610 antennas. The Splatch® SP610 is a surface mount monopole antenna
for embedded LTE and cellular IoT (LTE-M and NB-IoT) applications. It specifically
supports low-frequency LTE bands from 698 MHz to 960 MHz, notably the
700 MHz bands, and 1710 MHz to 2700 MHz making it an outstanding
antenna for LTE and cellular low power wide-area (LPWA) applications in North America,
Europe and worldwide. The SP610 uses a grounded-line technique to achieve outstanding
performance when subject to nearby sources of interference ...
 Electro-Photonics LLC, a market leader in
RF and Microwave components has released a new series of
band pass filters featuring frequencies from
500 MHz – 50 GHz. Our new wide bandwidth filters future high stop band
suppression and compact size. These RF/Microwave and mmWave filters can dissipate
up to 20 W of continues wave power. Electro-Photonics, LLC, is a global supplier
of high-frequency components and services. Our products include, SMT hybrid and
directional couplers, high frequency test fixtures, evaluation test boards, and
wire bondable passive components.
 Axiom
Test Equipment has posted a new blog entry entitled, "Get a Charge Out of Device Capacitance-Voltage Testing."
"Transistors and integrated circuits (ICs) make many of our modern electronic 'toys,'
such as cellular telephones and computers, possible. But before it is possible to
reliably design supporting circuits for new semiconductor devices, they must be
accurately tested to better understand their electrical characteristics. Last month's
blog looked at the ways in which current changed with changing voltage. As a follow-up,
this blog will explore capacitance as a function of applied voltage and how capacitance-voltage
(C-V) measurements can greatly assist the modeling and design of circuits with semiconductor
devices. Semiconductor devices come in many forms, including many types of transistors,
diodes ...
 In
this September 2019 Rohde & Schwarz newsletter, we provide you the latest information
in RF Measurements, Signal and Power Integrity. We've curated the most recent documents,
videos and webinars to support you in your on going education. Included are Making
Effective Use of Doherty Architecture, Measurement of the Phase Difference Between
Several Signals, and our Mixer & Frequency Converter Fundamentals Seminar on
October 16th. If you'd like to learn more, talk to your dedicated representative,
get a product demo or quote, please click on the button below. We're here to support
your projects and business needs.
 Anatech
Electronics, Inc. offers the industry's largest portfolio of high-performance standard
and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to 40 GHz.
Anatech has introduced three new filter designs for the
5G NR (New Radio) bands: an n257 Band / 26.1 GHz cavity bandpass filter
with N-type connectors, an n258 Band / 28 GHz cavity bandpass filter with 2.92 mm
(SMA) connectors, and an n260 Band / 39 GHz cavity bandpass filter with 2.92 mm
(SMA) connectors. Custom RF filters designs are used when a standard cannot be found,
or the requirements are such that a custom approach is necessary.
 Withwave's
Automatic Calibration Modules are ideal for users who want fast and easy calibration
for various Vector Network Analyzers (VNAs). The
W1204A Automatic Calibration Module is powered up via USB or 5.5 DC connector
and communicates with your VNA via USB or LAN to perform full 1-port through 4-port
calibrations. A simple one-push START button initiates the hands-off calibration
routine. This module works as host systems, measures and calculates calibration
coefficients and sends it to VNA easily. Versions available for frequencies beginning
at 100 kHz and up through 12, 18, and 26.5 GHz.
 Custom
MMIC, a leading designer and manufacturer of high performance monolithic microwave
integrated circuits (MMICs), is proud to introduce three new Low Noise Amplifier
(LNA) MMICs to its industry leading portfolio of high-performance RF and Microwave
MMIC products. These three new GaAs devices offer customers a broad frequency range
that addresses many popular wireless applications in the Aerospace, Defense and
Instrumentation markets. The CMD308P4 is a broadband MMIC low noise amplifier housed
in a leadless 4x4 mm plastic surface mount QFN package. The device operates
from 2 to 6 GHz and delivers 31 dB of gain with a corresponding output
1 dB compression point of +12 dBm and a noise figure of 1.6 dB. The
CMD308P4 includes on chip blocking capacitors and is internally matched to 50 ohms
which eliminates ...
 Custom
MMIC is proud to introduce two new
Ka-band
amplifier MMICs to its growing portfolio of higher frequency packaged products.
Both the CMD242K4 (Distributed Amplifier) and CMD299K4 (Low Noise Amplifier) operate
up to 40 GHz while being packaged in a small 4x4 mm air-cavity QFN plastic package
designed for surface mount applications. This new "K" series designation signifies
a new high frequency plastic package being utilized by Custom MMIC for 20 GHz and
above products demanded by aerospace, defense and instrumentation customers. "We
are constantly listening and responding to customer's needs and have had numerous
requests to package more of our high frequency die products. After a comprehensive
internal technical review and rigorous testing, we have selected a high frequency ...
 Exodus
Advanced Communications'
AMP2136−2−4−8KP
pulse amplifier (2.0-4.0 GHz, 2 kW, 4 kW & 8 kW Pulse)
series is designed for Lab Pulse/HIRF Mil-Std 461/464 test applications. Other frequency
ranges & power levels available. The unit can produce different power levels
based on configuration implementation. The design provides excellent band flatness,
reliable robust performance with outstanding Pulse fidelity. Rack integrated for
ease of application integration. Exodus Advanced Communications is a multinational
RF communication equipment and engineering service company serving both commercial
and government entities and their affiliates worldwide. Headquartered in Las Vegas,
the company utilizes its global network of resources to effectively serve customer
requirements.
 You
definitely want to check this out! ---
Explore an EMC
Control Room & Chamber without leaving your desk. Our new Interactive EMC
Solutions online tool allows you to discover our exceptional range of Rohde &
Schwarz EMC and field test equipment, as well as a custom chamber. Decades of experience
in the field of EMS measurements has made us the world market leader. By clicking
one of the two images, you'll enter a 3D world you control. Whitepaper: "Comparison
of Time Domain Scans & Stepped Frequency Scans in EMI Test Receivers." Also,
learn about the R&S®ESW EMI Test Receiver ...
 ConductRF's
LMR RF Cable
Assemblies are built exclusively using Times Microwave Systems class leading
LMR range of cable. LMR cables over lower loss than traditional Mil-C-17-RG cables
through their foamed PE dielectric. Exceptional multi-layer shielding with a multi-laminar
aluminum tape bonded to the dielectric provides shielding better than -90 dB.
LMR assemblies offer excellent cost & weight advantages over other solutions.
LMR cables are used extensively in military and commercial applications operating
between DC and 6 GHz. Broad Connector Choice LMR Cables are available on short
lead-times with custom lengths and configurations ...
 San
Francisco Circuits (SFC), a provider of PCB fabrication and assembly, has just announced
the company is now offering expanded
PCB tolerances for standard and advanced technology circuit boards. San Francisco
Circuits specializes in offering high-yield PCBs in all kinds of applications that
meet rigid design and performance specifications. San Francisco Circuits' specialty
is in providing solutions to the most complex design challenges and ultra-demanding
applications–be that high-heat, critical-reliability, or even up to military standards
if needed. Their tolerances are built within valid IPC guidelines and standards,
typically IPC-A-600 Class 2 standards that should be followed to help minimize issues
that could affect performance. View San Francisco Circuits' updated PCB Tolerances
here ...
 RF Superstore is proud to announce its
new line of coaxial
RF Connector Short
Circuits which has been added to our stock, with immediate availability. Connector
types include BNC, N, SMA / 2.5 mm, and TNC, both male and female. When used
in conjunction with our line of RF terminations, and through-type RF connector adapters,
they are useful for equipment calibration. RF Superstore launched in 2017,
marking the return of Murray Pasternack, founder of Pasternack Enterprises, to the
RF and microwave Industry. Pasternack fundamentally changed the way RF components
were sold. Partner Jason Wright manages day-to-day operations, while working closely
with Mr. Pasternack to develop ...
 Axiom Test Equipment, an electronic test equipment
rental and sales company, has published a blog that explains semiconductor measurements,
specifically, current-versus-voltage (I-V) characteristics and how semiconductors
will respond under different I-V conditions.
Semiconductor I-V testing is typically performed as a series of swept measurements,
with values of I and V changing for each measurement as a means of detecting any
trends in device performance under changing operating conditions. Read about which
specifications are key to consider when choosing an I-V tester for your project's
needs. Go over a few examples of I-V testers, a mainframe, and curve tracers which
provide the test energy levels ...
 Anatech Electronics, an RF and microwave
filter company, has introduced a new line of suspended stripline and waveguide type
RF filters. Sam Benzacar wrote as part of Anatech's August newsletter about the
continued debate over whether exposure to cellphones causes cancer, diminished vision,
etc. His short op−ed entitled "Radiation Hazard Battles Continue Unabated" is likely
a response to the FCC's recent declaration that RF energy at 5G mm-wave frequencies
does not pose an increased health hazard over existing technologies. Millimeter-wave
energy is non-ionizing and does not penetrate the skin deeply enough to be an issue
at operational power levels. Also included are ...
 With the new R&S NGM200, Rohde &
Schwarz extends their range of
specialized power
supplies. The models of the R&S NGM200 series offer new features, which
make them ideal for developing battery-powered equipment operating at up to 20 V
and drawing currents up to 6 A. Available as single-channel and two-channel models:
the R&S NGM200 power supplies. Being part of the same power supply family, both
the R&S NGL200 and the new R&S NGM200 series offer the same superb performance
and specifications to supply extremely stable outputs with a minimum of residual
ripple and noise. Devices that switch from a few µA in sleep mode to several A in
active mode benefit from the exceptionally fast load recovery time ...
 Saelig Company has introduced the new
Rigol Technologies
MSO8000 Series of digital oscilloscopes, which combine best in class sampling
(10 GSa/sec) and memory depth (500 Mpts) with a modern, flexible user
interface enabled by Rigol's new UltraVision II architecture and innovative Phoenix
chipset. Three models are available with input bandwidths from 600 MHz to 2GHz,
each with 4 analog channels. The series is MSO ready: an optional 16-channel logic
analyzer interface is provided to provide digital debug capabilities with the addition
of 16 channel probes and software. The advanced MSO8000 Series features a 10.1"
1024 x 600 capacitive multi-touch color LCD screen with 256-level intensity grading
and a waveform refresh rate ...
 Signal Hound, a developer of optimized solutions
for RF signal test and measurement, announces a new
rental program for
all Signal Hound spectrum analyzers, vector signal generators, and tracking generators.
Signal Hound's equipment rental rate is only 6% of the cost of a device per month
for as long as the renter wants to keep the device, with a one-month minimum rental
period. If the renter wants to purchase the device after the rental period, 30%
of the total amount spent on the rented product can be applied to a new version
of the same device type. "Our rental program is designed to remove the hesitation
that an organization might have in allocating budget towards a new type of test
equipment ...
 ConductRF's close partnership with TE in
its development of its new Nano-miniature RF Solutions for
VITA67.3 has put
us in a great position to support your VPX RF cable assembly needs. Modular solution
supports 8 to 18 positions, flexible 0.047" diameter cable, supports frequency up
to 70 GHz, use with standard solutions (SMA, SMPM, etc.), 2x density of Vita67.1.
ConductRF's PFT33 Series of Micro Flexible Cable Assemblies has been designed directly
with TE Connectivity involvement and in partnership to maximize the capabilities
of TE's new Vita67.3 NanoRF VPX modular connector system. ConductRF offers its soft
FEP jacketed ø0.047" cable to facilitate maximum flexibility and provides solutions
for jumper cables ...
 ConductRF offers an extensive line of
RF and mixed signal cable harnesses and assemblies with custom
configurations, lengths and markings. Thousands of combinations of coaxial, power,
and digital and analog signal connectors available. Flexible phase-stable, low-loss,
phase-matching, high power, and other options per your requirements. Broad insert
connector solution choices including BMA, SMPM, for cable sizes #8, #12 & #16
Custom marking and ruggedization enhancements capability. Contact ConductRF today
and let us help your project ...
 Rohde & Schwarz has released a new video
entitled, "Noise Power Ratio Measurements." In it, application engineer
Gareth Lloyd discusses a convenient and easy way to measure NPR over a maximum of
25 notches. A combination of the R&S®SMW200A vector signal generator and the
R&S®FSW signal and spectrum analyzer equipped with the R&S®FSW-K19 option
can be used to characterize two-port devices such as satellite transponders, power
amplifiers and converters. The R&S®FSW-K19 measures Noise Power Ratio (NPR)
using either a notched comb signal, a notched noise or a digitally modulated stimulus
signal to determine how the DUT will perform.
 Skyworks Solutions is pleased to introduce
the SKY85774-11, a
highly integrated 5 GHz front-end module (FEM) that supports simultaneous WLAN
and licensed assisted access (LAA) protocols for mobile smartphones and tablets.
This advanced module incorporates a power amplifier (PA), low-noise amplifier (LNA)
with bypass, and an SPDT transmit / receive (T/R) switch. Its high performance power
amplifier increases range and saves power while eliminating external devices and
reducing PCB area. The SKY85774-11 comes in a compact 20-pin 2.2 x 3 package and
is currently being leveraged across leading mobile connectivity reference designs.
|
