|
Features
- Integrated PA with up to +17 dBm output power
- Integrated LNA (2.5 dB noise figure typical) and bypass path
- Integrated antenna diversity switching for all modes
- Single-ended transmit/receive interface
- Fast switch on/off time: < 800 ns
- Supply range: 1.7 V to 3.6 V
- Sleep mode current: < 1 μA typical
- No external bias resistor is required
- Small MCM (22-pin, 3.5 mm x 3.0 mm x 0.82 mm) package, NiPdAu-plated (MSL3,
260 °C per JEDEC-J-STD-020)
Skyworks SKY66404-11
April 3, 2020 - Irvine, California - Skyworks Solutions, Inc., is empowering
the wireless networking revolution. Our highly innovative analog semiconductors
are connecting people, places and things spanning a number of new and previously
unimagined applications within the aerospace, automotive, broadband, cellular infrastructure,
connected home, industrial, medical, military, smartphone, tablet and wearable markets.
Skyworks is pleased to launch the
SKY66404-11, a 2.4 GHz front-end module (FEM) designed for Zigbee®, Thread,
and Bluetooth® (including Low Energy) ultra-low power IoT applications spanning
sensors, beacons, smart meters and thermostats, wireless cameras, smoke and CO detectors,
and wearables including medical devices. Featuring high-performance in a compact
form factor, SKY66404-11 provides increased efficiency, and more than 4X range extension
over previous models. The integrated module includes a power amplifier, low-noise
amplifier, low-loss bypass path, transmit and receive switches, and digital controls
compatible with 1.7 to 3.6 V CMOS levels. Its wide supply voltage range also allows
the device to be used in battery powered IoT applications over a broad spectrum
of the battery discharge curve.
The SKY66404-11 is a high-performance, fully integrated RF front-end module (FEM)
designed for Zigbee, Thread, and Bluetooth (including Low Energy) applications.
The SKY66404-11 is designed for ease of use and maximum flexibility. The device
provides integrated inter-stage matching and harmonic filter, and digital controls
compatible with 1.6 V to 3.6 V CMOS levels. The RF blocks operate over a wide supply
voltage range from 1.7 V to 3.6 V that allows the SKY66404-11 to be used in battery
powered applications over a wide spectrum of the battery discharge curve. Reference
Designs The SKY66404-11 FEM has been designed into reference designs with products
from Dialog Semiconductor, Nordic Semiconductor, NXP, Texas Instruments and Silicon
Labs. Combined with our partners' platforms, the SKY66404-11 meets today's demand
for long-range, low-power and cost-effective solutions.
About Skyworks
Skyworks Solutions, Inc. is empowering the wireless networking revolution. Our
highly innovative analog semiconductors are connecting people, places and things
spanning a number of new and previously unimagined applications within the aerospace,
automotive, broadband, cellular infrastructure, connected home, industrial, medical,
military, smartphone, tablet and wearable markets. Skyworks is a global company
with engineering, marketing, operations, sales and support facilities located throughout
Asia, Europe and North America and is a member of the S&P 500® and Nasdaq-100®
market indices (Nasdaq: SWKS).
Contact
Dena Pardi Skyworks Solutions, Inc. 5221 California Ave Irvine, CA
92617 Phone: 949-231-4207 E-Mail:
Dena.Pardi@skyworksinc.com
Posted April 3, 2020
|
