|
Here are 2022 press release archive pages:
1 |
2 |
3 |
4
 Anritsu Company has developed the new
Compact Antenna Test Range (CATR) Anechoic Chamber 2 MA8172B configuration
for its New Radio RF Conformance Test System ME7873NR to support 5G millimetre
wave (mmWave) 2 Angle of Arrival (2 AoA) Radio Resource Management (RRM) tests.
Anritsu’s MA8172B solution is unique in industry as it is based on hybrid of IFF
(Indirect Far Field) and DFF (Direct Far Field) test methodologies and this
really helps customer save real estate space. A solution based on all DFF or IFF
will be bulky and expensive. Anritsu helps in providing value to customer by
making this new solution lower cost, smaller footprint, upgradable, and serve
multiple test areas. Evaluating UE communications quality and connection
stability during handovers between base stations is a difficult technical
challenge for mmWave mobile communications. Consequently, Anritsu has developed
its MA8172B upgrade model for the Over-the-Air (OTA) CATR...
 Quantic PMI, a leading supplier of
custom,
high-reliability MIC/MMIC components and subsystems for applications in
space, military, communications, commercial and consumer electronics systems for
more than three decades, introduced six new products this month of December in
their extensive line of RF and microwave components. Included amongst them are
an ultra-high speed, high sensitivity threshold detector for 4-4.5 GHz, a
broadband variable attenuator / modulator for 0.5-18 GHz, and a directional
coupler for 33-36 GHz. Contact Quantic PMI today for more information...
 Sam Benzacar of Anatech Electronics, an
RF and microwave filter company, has published his December 2022 newsletter that
features his short op-ed entitled "The Resurgence of
Microwave Directed Energy Weapons." The premise of directed energy (DE) weapons
is to blast RF/microwave energy at a specific frequency or band of frequencies at
a high enough power to confuse or totally disable drones and/or missiles while in
flight, before reaching their intended targets. Sam argues reasonably that the relatively
low power and aiming requirements of a microwave directed energy system can be much
more effective than a high power laser beam that must be aimed and track the target
precisely enough to make surface contact. An RF system can make multiple "shots"
in the same time required for a laser power supply to recharge between shots. A
great example of how DE works can be seen in this decade-old video of an Active
Denial System use to disperse unruly crowds. The targets are humans, but the reactions
are analogous to how radio receivers are affected...
 Innovative Power Products (IPP) with more
than 30 years of experience designing & manufacturing RF & microwave passive
components, is proud to introduce one of its newest broadband, high power, Dual
Directional Couplers, the Model IPP-3238. The
IPP-3238
is a 600 watt dual directional coupler covering the full 2000 - 8000 MHz
band in a 1.30" x 1.30" x 4.13" package with Type N connectors on in/out ports and
SMAs on the coupled ports. The IPP-3238 provides 40 dB nominal coupling, insertion
loss of <0.30 dB, main line VSWR of <1.35:1, coupled flatness of ±1.0 dB,
and directivity >17 dB. The IPP-3238 is available for both commercial and
military use and is RoHS compliant...
 Withwave, is a leading designer, developer
of a broad range of
RF, Microwave, and Millimeter Wave Test Solutions and subsystems with a focus
on electromagnetic field analysis and signal processing. Withwave’s extensive product
portfolio serves four primary target markets: Wireless Communications, Test &
Instrumentation, Automated Test Equipments, and Network Systems. A short Withwave
2022 Product Presentation video has been produced and posted on YouTube which provides
quick overview of their offerings. As seen in the thumbnail screenshots, it shows
real examples of product lines rather than just CAD drawings...
 Antenova Ltd, the UK-based manufacturer
of antennas and RF antenna modules for IoT and M2M, is announcing
three
antennas for Wi-Fi6 and Wi-fi6E. They are a surface mounted antenna, a flexible
antenna and an external antenna for Wi-Fi6 and Wi-Fi6E. All three antennas use the
2.4 GHz, 5 GHz and 6 GHz bands and support IEEE standards 802.11a/b/g/j/n/ac/ax.
The SMD antenna, named Billi, part number SR43W078, measures 15 mm x 6 mm
x 1 mm and requires only 1 mm of clearance on the PCB. This makes it an
exceptionally low profile antenna solution for slim devices with a small space for
the antenna. In tests this antenna showed very high efficiency across all three
bands. It is suitable for pick-and-place manufacturing processes. The FPC antenna,
named Lotti, part number SRF3W077 is a flexible antenna measuring...
R&S Liquid Cooled Air Traffic
Control over Greenland
 In the summer of 2023, Rohde & Schwarz
will be delivering low-maintenance and compact
R&S SK4105 shortwave transmitters to Naviair, the Danish air navigation
service provider that handles air traffic in the lower airspace from the Flight
Information Center (FIC) in Greenland. Greenland’s airspace is huge and transmitter
stations are placed in remote locations. Naviair operates several HF and VHF radio
systems at strategic points along the Greenlandic coast. The Flight Information
Center (FIC) in Nuuk, Greenland, is responsible for primary communications. Its
legacy HF transmitters will soon be replaced with the new, high power R&S SK4105
shortwave transmitters...
 Anatech Electronics offers the industry's
largest portfolio of high-performance standard and customized
RF and microwave
filters and filter-related products for military, commercial, aerospace and
defense, and industrial applications up to 40 GHz. Three new filter models
have been introduced - a 650 MHz LC lowpass filter with a maximum passband
1 dB insertion loss (SMA connectors), a 30 MHz LC lowpass filter with
a minimum passband return loss of 15 dB (N connectors), and a 3800 MHz
lowpass filter with a maximum insertion loss of 1 dB (SMA connectors). Custom
RF power filter and directional couplers designs can be designed and produced with
required connector types when a standard cannot be found, or the requirements are
such that a custom approach is necessary...
 Exodus Advanced Communications is a multinational
RF communication equipment and engineering service company serving both commercial
and government entities and their affiliates worldwide. We are pleased to present
the new Exodus Model AMP2136P-LC-8KW, a pulse amplifier designed for Pulse/HIRF,
EMC/EMI Mil-Std 461/464 and Radar applications. AMP2136P-LC-8KW provides superb
pulse fidelity and up to 100 μsec pulse widths. Duty cycles to 6% with a minimum
69 dB gain. Available monitoring parameters for forward/reflected power in
watts and dBm, VSWR, voltage, current, temperature sensing for outstanding reliability
and ruggedness for compact integrations.
 Axiom Test Equipment, an electronic test
equipment rental and sales company has published a new press release entitled "Tracking
Testers for Radars & Communications Systems," that explains how ideal signal
sources for testing communications and radar equipment should combine high performance
with versatility. Communications systems transfer information between locations
while radars search for targets. A quick review of the essential differences between
communications and radar systems can help target the types of test equipment with
the capabilities needed to optimize the performance of each type of electronic system.
The types of signals used in communications and radar systems are as diverse as
the types of systems themselves. Communications systems range from short-range wireless
Bluetooth links, such as between a computer and printer, and more complex 5G wireless
networks with billions of users worldwide. Radars are now used in all markets, from
automotive safety to weather forecasting, with signals covering a wide range of
power levels...
 Copper Mountain Technologies (CMT) has a
whitepaper available entitled, "Near
and Far Field Measurement." It begins, "To obtain optimal performance in an
over the air RF system, the antennas must be chosen to meet specific requirements.
Performance parameters such as size, wind-loading, environmental ruggedness, transmission
pattern, bandwidth, and power handling capability should be considered. Especially
important in an RF system design is the 'link budget.' This parameter determines
the end-to-end RF loss and is affected by transmitter output power, feedline loss,
transmit antenna gain, path loss through the air, receiver antenna gain, feedline
loss once again and receiver noise-figure among other factors. A failure to meet
the link budget in an RF system design will result in noisy performance and loss
of coverage. In this application note, methods of measuring the transmission (or
reception) pattern which determines antenna gain with a VNA will be examined. Most
antennas possess some directionality to their performance..."
 Copper Mountain Technologies (CMT) has a
webinar coming up in league with Eravant as part of our VNA 101 Bootcamp Webinar
series titled "Software
Tips & Tricks." The CMT vector network analyzer software has a lot of features
and capabilities. During this session, we will review some aspects of the software
in more detail to help users understand how to get the most out of the software.
This is a follow-on to the previous "Fixture Requirements to Accurately De-Embed
DUTs from VNA Measurements" Webinar. Automatic Fixture Removal software may be used
to remove the effects of fixtures from the measurement of a Device Under Test. It's
fast and easy to use, but it is imperative to understand the extent to which fixture-related
measurement impairments may be compensated. During this webinar, we will review
the possible pitfalls during de-embedding and measurement of a DUT on a fixture...
 Sam Benzacar of Anatech Electronics, an
RF and microwave filter company, has published his November 2022 newsletter that
features his short op-ed entitled "Face Reality: Level 5 Vehicle Autonomy Won't
Be Here Anytime Soon." A definition of Level 5 on the level5auto.com website
declares thus: "Level 5 driving is full driving automation. That is, the car's systems
can accomplish every part of the dynamic driving task (DDT). They can also monitor
all of the vehicle's surroundings and make predictions about what the objects in
the space around it will do next. Further, the car can do this anywhere. The systems
are no longer confined to a limited operational design domain (ODD). And, finally,
the car operates without the expectation or need for a human to ever take over driving
- even in the case of a system failure." The scheme requires not only perfect AI
(artificial intelligence), but perfectly functioning electronics processors, sensors,
and control over the car's throttle, steering, and brakes. That's a pretty tall
order. As Sam notes, if any monitoring and/or intervention by the human occupant
is required, then Level 5 has not been achieved. Level 5 may well be an
asymptote of the vehicle autonomy curve...
 Innovative Power Products (IPP), with more
than 30 years of experience designing & manufacturing RF & microwave passive
components, is pleased to introduce the
IPP-5004, a unique 3-port Balun that, as a divider, splits an unbalanced input
signal at the sum port J1 into a balanced signal output pair at J2 and J3. The balanced
signals are equal in amplitude and have a 180° phase shift between them. As a combiner,
the Balun will sum the balanced signal pair into one unbalanced output at the J1
sum port. The IPP-5004’s unbalanced impedance at the sum port J1 is 50 ohms and
the unbalanced impedances at J2 and J3 are 25 ohms referenced to ground. The operating
frequency is 30-1500 MHz with a power rating of 100 W. The insertion loss is
less than 0.60 dB, main line VSWR is less than 1.35:1, phase balance is ±7° and
amplitude balance is ±0.60 dB. This Balun is produced in a small surface mount
(SMD) package with a 1.10" x 1.15" footprint and is available on tape and reel to
pick and place for high volume applications...
 Empower RF Systems sets the bar for
extreme high-power solid state COTS amplifiers. The Model 2236 is liquid cooled
and combines the output of two six foot cabinets with each cabinet combining sixteen
2U power amplifiers. Lower and higher power versions of this amplifier are available
due to the scalable, modular design. Operating from 2800 to 3500 MHz, the flexible
pulse handling capabilities of this fielded system includes 20% duty cycles with
pulse widths from 200 ns to 500 us and PRFs up to 500 kHz. The 2236
is designed for lower total cost of ownership and higher availability than TWTs
and legacy solid state implementations. The transmitter consists of a system controller
in a 3U 19-inch rack unit and a total of thirty two 2U 19-inch rack amplifier drawers
with each amplifier drawer containing an integrated power supply in its 2U chassis...
 Skyworks Solutions is introducing an
isolated gate driver reference design that operates with Wolfspeed's Silicon
Carbide (SiC) Field Effect Transistor (FET) power modules With the growing adoption
of SiC for power conversion and inverter applications - fueled by consumer demand
for greater range, faster charging and more efficient propulsion for electric vehicles
(EVs) - there is an increasing need for gate drivers that are optimized for SiC
FETs. The new Si828x gate driver board (GDB) kit from Skyworks simplifies design
and enables increased integration for automotive applications by replacing competing
designs with more complex gate driver board layouts. Skyworks Si828x gate driver
board (GDB) kit. What: Designed and tested for Wolfspeed XM3 SiC FET modules and
instantiated on an evaluation board, the Skyworks Si828x GDB kit keeps high voltage/high
current SiC modules from overload and circuit damage...
 ConductRF's LSA series of
Low Loss, Performance
flexible RF cable assemblies, provide microwave system designers with a versatile
solution for most applications, and are available immediately from DigiKey. Here
we offer customers a solution for 0.086" dia. cable that facilitates greater flexibility
and handling or, 0.141" dia. that exploits the same great performance but with almost
half the loss. Connector options include SMA, Type-N, TNC & SMP that provide
excellent VSWR between DC and 18 GHz, also solutions for MCX & SMB are
available in a wide array of configurations. These assemblies are built using our
own double shielded, FEP jacketed cable, that was developed specifically for performance
solutions. With shielding effectiveness exceeding 90 dB through 18 GHz,
these cables minimize the threat of cross-talk effect...
 Picocom, the 5G Open RAN baseband semiconductor
and software specialist, today announced that SOLiD, a global leader in cellular
in-building mobile coverage, has selected Picocom silicon and software to power
its next generation of
5G Open RAN Radio
Units (O-RUs). Picocom PC802, 5G Open RAN Radio Units (O-RUs) "SOLiD is at the
forefront of, and continues to be committed to, being a worldwide leader in in-building
cellular technology. Partnering with Picocom to purchase PC802 devices and license
its 5G NR O-RU software gives us the confidence that SOLiD will maintain the edge
over our competition. This agreement will enable us to be competitive in the ever-evolving
Open RAN market with our next-generation O-RUs," said HyunChae Kim, Vice President
at SOLiD...
 Anatech Electronics offers the industry's
largest portfolio of high-performance standard and
customized RF and
microwave filters and filter-related products for military, commercial, aerospace
and defense, and industrial applications up to 40 GHz. Three new filter models
have been introduced - an 849 MHz cavity bandpass filter with a 5 MHz
bandwidth, a DC-1440 MHz / 2200-2500 MHz LC diplexer, and a 20 MHz LC
highpass filter with a 1.5 dB insertion loss. Custom RF power filter and directional
couplers designs can be designed and produced with required connector types when
a standard cannot be found, or the requirements are such that a custom approach
is necessary...
 CETECOM, a global company providing automotive
test and certification services, announces the first-of-its-kind
Automotive
Experience Lab (AEL). This innovative testing center, which opens on November
1, 2022 in Silicon Valley, is designed as a proof-of-concept lab for automotive
application testing in a simulated environment. CETECOM, with more than 25 years
experience in testing and certifying RF devices, leads the project, which will enable
automotive engineers to validate component-level hardware designs during the HIL
phase. With early access to cutting-edge test equipment, automotive application
teams can significantly reduce design time, saving development costs and getting
their product to market more quickly. CETECOM is offering one free four-hour session
in the lab, which includes a consultation with CETECOM experts and training...
 Axiom Test Equipment, Inc., an electronic
test equipment rental and sales company has published a new blog post entitled "Weighing
the Benefits of Benchtop vs. USB Based Test Equipment," that explains the differences
between benchtop and USB based test equipment to identify the best option for a
user's project. The most glaring difference between USB-controlled units and standard
benchtop units is usually size. A USB unit fits next to a laptop computer on a small
desk while a benchtop unit occupies the better part of a laboratory work area or
6U or more of a standard 19-in.-wide test equipment rack. Another difference between
a USB unit and a traditional benchtop unit is the computer. For USB equipment, the
computer is part of the test setup, whereas for a benchtop unit, it is an option...
 Innovative Power Products (IPP), with more
than 30 years of experience designing & manufacturing RF & microwave passive
components, is pleased to introduce the
IPP-8111, 20 dB directional coupler for 2 to 6 GHz. The IPP-8111 is
a unique broadband design which provides separate coupled ports for both forward
and reflected signals with internal terminations. This coupler is produced in a
surface mount (SMD) package of 0.48" x 0.65" and is available on tape and reel at
a competitive price for high volume applications. Its insertion loss is less than
0.35 dB, main line VSWR is less than 1.35:1, coupling value is 20 dB, coupled flatness
is ±2.0 dB, and directivity is greater than 17 dB. The IPP-8111 is available for
both military and commercial use. View the outline drawings, test data and other
details for the IPP-8111...
 Sam Benzacar of Anatech Electronics, an
RF and microwave filter company, has published his October 2022 newsletter that
features his short op-ed entitled "It's Getting Crowded
in Low Earth Orbit," where he discusses the rapidly increasing number of both
operational and non-operational satellites in low earth orbit (LEO). It presents
both a physical space crowding problem and an RF spectrum crowding problem. Companies
like Anatech help with the RF crowding by designing and building filters to mitigate
the presence of nearby signals. Companies like ClearSpace SA (Switzerland)
are working the physical space crowding issue by designing and building grappling
bot satellites which will grab a satellite (or large debris) and drag it to a lower
orbit for atmospheric re-entry. I wonder what the carbon footprint is of a launch
vehicle needed to get the bot aloft...
 Modelithics is pleased to announce the release
of the latest version, v22.5, of the
Modelithics
COMPLETE Library for use with Keysight Technologies' PathWave Advanced Design
System (ADS). New nonlinear models for 7 Qorvo GaAs pHEMT devices are another major
aspect of version 22.5. These models are validated to 40 GHz and include advanced
features like self-heating and ambient temperature effects. In addition, the release
includes a new nonlinear model for the Mini-Circuits TAV2-501+ E-pHEMT transistor.
This model is validated to 15 GHz and is both substrate and temperature scalable.
Finally, new models are also available for Transcom's TC2381 and TC2384 pHEMT transistors...
 Lotus Communication Systems, a manufacturer
of connectorized, cascadable RF and microwave components, has developed a new
high performance,
ultra-flat gain low noise amplifier (LNA), PN#: LADC8GFR. This LNA have low
noise figure 1.8 dB and ultra-flat gain ±0.5 dB over wide frequency range
from DC to 8 GHz. EMI Shielding (includes weatherproof) option is available
for all our LNAs. Lotus' LNA can be customized to add integrated Bias Tee, wide
voltage operation (+6 ~ +34 V), integrated RF limiter, multi-stage
high gain, and meet customer's mechanical requirement. Lotus Communication Systems,
Inc. has CNC machine shop in house with 4th axis Robodrill for RF enclosure manufacturing.
Lotus also has state-of-art SMT line in house that use automatic stencil printer,
automatic pick and place and reflow oven...
 Modelithics, the industry leader in providing
innovative and high-quality custom modeling and measurement services for RF, microwave
and millimeter-wave electronic devices provides this update on the latest happenings
with their products and industry partners. Modelithics® Releases the COMPLETE+3D
Library™ v22.4 for Ansys® HFSS™ Included in this library are over 370 highly scalable
Microwave Global Models™ for capacitor, inductor, and resistor families from many
popular vendors. Also included is Modelithics' collection of over 500 3D electromagnetic
(EM) geometry models for inductors, capacitors, filters, packages, and connectors.
With both circuit and 3D EM models, the Modelithics COMPLETE+3D Library now includes
over 30 vendors for more than 850 models representing over 25,000 individual components.
Modelithics Offers New Attenuator and Resistor Models from Smiths Interconnect...
 ConductRF's
latest innovation is
Hi-Frequency
RF Jumper Cables with 2.92 mm, 2.4 mm or 1.85 mm connectors as
standard. This assemblies use our optimized direct solder attached connectors and
our superior double shielded hi-frequency A61SW flexible cable with shielding effectiveness
greater than -100 dB. These cables are design to support the latest requirements
for 5G applications for cross connecting modules, but can equally be used in any
field where hi-frequency jumper cables are required. Beyond our standard interconnect,
we can also offer solutions with SMP, SMPM, SMA and many other common connector
interfaces. Hi-Performance right angled options are available utilizing hard setting
shrink tube to form the cable bend...
 At Euronaval 2022, taking place from October
18 to 21 in Paris, France, Rohde & Schwarz is proud to announce the launch of
its new liquid-cooled R&S SK4105/4110 HF high-power transmitters. With this,
the company is offering next generation technologies in
beyond-line-of-sight (BLOS) communications. Over the past decades, Rohde &
Schwarz has been a reliable innovator in HF technology. This new transmitter offers
extreme reliability, best-in-class availability and low total cost of ownership.
The company's high vertical integration ensures service and maintenance for the
entire lifecycle. Unsurpassed performance through HF wideband capability as well
as 5 kW or 10 kW output power make the R&S SK4105/4110 unique on the market...
 Antenova Ltd, the UK-based manufacturer
of antennas and RF antenna modules for IoT and M2M, is releasing a new, compact
and very efficient
antenna for the Wi-Fi, Bluetooth and ZigBee frequencies at 2.4 - 2.5 GHz. This
new antenna is named Invicta, part number SRFW082. The Invicta antenna averages
efficiency of 70% across the 2.4 GHz band. Consequently designs using this antenna
will operate better, over longer distances and through walls and obstacles, thus
extending the coverage and performance of wireless devices using Bluetooth, Wi-Fi
and ZigBee. Invicta is a Flexible Printed Circuit (FPC) antenna, which is easy to
place in a design. It connects directly to the PCB via a cable and IPX MHF (UFL)
connector...
 As a communications systems integrator (CSI)
for the Air Ground Air Transition (AGAT) project lead by BAE Systems,
Rohde & Schwarz
Australia has completed its scope of work in 16 months, despite challenges imposed
by the global health crisis. "Working to a tight project schedule, our team has
again been equal to the task," says Managing Director Rohde & Schwarz Australia
Gareth Evans. "This work included provision of over 300 CERTIUM radios and ancillaries,
CERTIUM VCS-4G as the backup voice communications system and CERTIUM management
systems for 12 defense aerodromes across Australia." "To set up a team and design,
deliver and integrate these systems to achieve the factory acceptance test milestones
in under 5 months, and subsequently deliver the systems for 12 sites over the next
11 months..."
 ConductRF manufactures a broad range of
cables using various LMR cable styles from Times microwave. This datasheet shows
the options and part number construction for our series using
LMR Ultra-Flex Cable.
LMR-UF is a versatile cable that has low loss, good flexibility, and great RF performance.
ConductRF has made several standards available via DigiKey in this series for customer
convenience, Our standards include N-type connectors where male options off as standard
a hex/knurl coupling nut to aid in torqued or finger tightening. SMA's are also
available as standards and configuration include straight and right angle male as
well as bulkhead options. DigiKey standard include cable sizes 240 and 400. LMR
is the registered trademark of Times Microwave...
 Innovative Power Products (IPP), with more
than 30 years of experience designing & manufacturing RF & microwave passive
components, is pleased to report that during the month of September, over 30 employees
joined IPP's community service day at Long Island Cares, a food bank located in
Hauppauge, NY. They sorted, weighed, and packed food, drinks, and cleaning/household
products for distribution to needy people. Also, Innovative Power Products introduces
our Model
IPP-7124, a 150 watt, surface mount 90° coupler that operates from 700 to 4200
MHz. The IPP-7124 will combine two signals up to 150 watts CW of total output power.
This coupler is produced in a Surface Mount (SMD) package with a size of 0.20 x
1.80 x 0.233 inches. The insertion loss is less than 0.65 dB, amplitude balance
is less than ±0.85 dB, phase balance is less than ±5°...
 Axiom Test Equipment, Inc., an electronic
test equipment rental and sales company has published a new blog post entitled,
"Teaming
Amplifiers and Signal Generators," that explains how connecting a suitable amplifier
to a signal generator can be boosted to the power levels needed in a project. Signal
generators serve as sources of analog, digital, and even RF/microwave signals for
test purposes. They may not always deliver enough output power for some tests, such
as characterizing filters and antennas, and help may be needed. By connecting a
suitable amplifier, a signal generator can be boosted to the required power levels.
Finding the right combination comes down to knowing the key specifications for both
units. Laboratory amplifiers can be specified by frequency range, bandwidth, output
power, and gain...
 Synzen Precision Technology has unveiled
ALCOR and ATRIA - two new
low-profile
antennas which are perfect for the wearable market or any IoT devices which
require an ultra-slim design. Both designs deliver excellent performance at a limbo-defying
height of only 1.6 mm. ALCOR is a 5G low-profile surface mount antenna that
has been developed to be compact but still cover bands from 617-6000 MHz. It
has a small footprint of 40 x 10 x 1.6 (mm) and a fallback to 4G/3G/2G. ATRIA is
even more compact but still covers bands from 698-2690 MHz (also falls back
to 3G/2G). It measures only 30.0 x 7.0 x 1.6 (mm) and requires a small clearance
area (don't be fooled by claims of small antennas which often need a much bigger
clearance area)...
 Signal Hound's
SM435C
43.5 GHz, high-performance spectrum analyzer and monitoring receiver is
now available to order. The SM435C includes a 10 Gigabit Ethernet SFP+ port, enabling
the SM435C to communicate with a PC over long distances using a fiber optic cable.
Designed for remotely-located accurate RF data analysis at the lowest cost possible,
the SM435C also includes a signed calibration certificate and a printed packet of
calibration data. The Option-80 variant of the device provides downconverter functionality,
allowing engineers working with 5G to utilize 800 MHz of continuous real-time
data for in-depth analysis. The SM435C Option-80 is also a perfect fit for applications
requiring extremely clean phase noise. The affordability of the SM435C opens the
door to industry professionals who were previously unable to attain this power in
a compact and economic package. It is available now, with a U.S. retail price of
$25,380...
|
