...with 2 dB Noise Figure
Planar Monolithic Industries (PMI) introduces a 6.0 to 18.0 GHz low noise amplifier
with a 2 dB noise figure, model number
PE2-19-6G18G-1R6-16-12-SFF. PMI Model
No. PE2-19-6G18G-1R6-16-12-SFF is a low noise amplifier which operates between 6.0
to 18.0 GHz. This LNA provides 19 dB of small signal gain while maintaining a low
noise figure of only 2 dB. The P1dB output power of 15 dBm enables the LNA to function
as a LO driver for balanced, I/Q or image reject mixers. This model also features
I/O's that are DC blocked and internally matched to 50 ohms. Contact PMI today
for more information.
About Planar Monolithics Industries (PMI)
Planar Monolithics was founded basically to take advantage of the growing demand
in monolithic-based products using the hybrid MIC/MMIC technology innovations that
are mushrooming in a big way all over the world. High performance and reliable products
can be obtained by using this technology. Planar Monolithics will meet these requirements.
Planar Monolithics organization has been setup to design, develop, manufacture,
test, and market complex state-of-the-art hybrid RF/microwave and monolithic integrated
circuits (MIC/MMIC) and components, and hybrid MIC/MMIC supercomponents and subsystems.
Planar Monolithics provides its unique products for applications in space, military,
communications, telecommunications, commercial, and consumer electronics systems.
Contacts:
Sebastian Palacio Director of Sales & Marketing Principal Applications
Engineer Planar Monolithics Industries, Inc. 7311-F Grove Road Frederick,
Maryland 21704, USA CAGE Code: 05XQ0 Phone: (301) 662-5019 Cell:
(301) 455-9897 E-Mail:
spalacio@pmi-rf.com Website:
www.pmi-rf.com
Posted August 24, 2021
|
