March 2, 2024 - Vista, California - Axiom Test Equipment, an electronic test equipment rental and
sales company has published a new blog post that covers the way calibrators offer
the precision needed to evaluate in-process testers and how they can securely deliver
test results to a control center to effectively manage an industrial process. For
effective process test equipment calibration, a calibrator must be a source of precisely
controlled parameters as well as a highly accurate measuring tool for evaluating
the same parameters. A calibrator must often inject a parameter, such as voltage,
current, pressure, or temperature, into the process equipment under test to determine
the condition of the equipment.
Traditionally, data transfers to and from a calibrator were handled by dedicated
communications equipment. But growing demand for mobility and portability in calibrators
capable of in-field use has resulted in calibrators and communicators often within
the same package. When equipped with suitable communications interfaces, such as
Ethernet or Bluetooth, calibrator/communication devices can quickly and seamlessly
make their connections to the process equipment to be tested as well as to a control
center.
Automated industrial manufacturing processes have many built-in measurement devices
to ensure the processes run properly. The units keep track of parameters important
to the processes, such as temperature, pressure, voltage, current, resistance, and
frequency. They communicate conditions to a central controller where data can be
analyzed to optimize an industrial process. But time takes its toll on these testers,
and they must be regularly calibrated to effectively support an industrial process.
Fortunately, calibrators offer the precision needed to evaluate in-process testers.
Aided by communicators, they can securely deliver test results to a control center
to effectively manage an industrial process. In some cases, calibrators and communicators
come in the same package, often small enough to be held in one hand for on-site
measurements.
For effective process test equipment calibration, a calibrator must be a source
of precisely controlled parameters as well as a highly accurate measuring tool for
evaluating the same parameters. A calibrator must often inject a parameter, such
as voltage, current, pressure, or temperature, into the process equipment under
test to determine the condition of the equipment. As a calibration source, it must
provide each parameter with precision and stability to support fine tuning of the
industrial process equipment. As an analyzer, it must be capable of the accuracy
and repeatability needed to maintain a process within well-defined limits. A calibrator
often requires bidirectional communications capability to transfer test data acquired
from the process equipment to a control station.
Traditionally, data transfers to and from a calibrator were handled by dedicated
communications equipment. But growing demand for mobility and portability in calibrators
capable of in-field use has resulted in calibrators and communicators often within
the same package. When equipped with suitable communications interfaces, such as
Ethernet or Bluetooth, calibrator/communication devices can quickly and seamlessly
make their connections to the process equipment to be tested as well as to a control
center. Multifunction calibrators are often equipped with multiple communications
interfaces, including Ethernet, USB, Bluetooth, and Wi-Fi interfaces, to simplify
transfer of measured process data from a remote calibrator to a control station
for managing the test results.
Whatever your project requires testing of, rent or buy quality test equipment
from Axiom Test Equipment. For over 15 years Axiom Test Equipment has rented, sold,
repaired and accepted trade-in of test equipment to support your test & measurement
needs. If you would like help selecting any type of test equipment for your next
project, contact Axiom Test Equipment's sales department at
sales@transcat.com,
call 760-806-6600, or browse Axiom Test Equipment's inventory online at
www.axiomtest.com.
About Axiom Test Equipment
Get Exactly What You Need. Rent - Buy
- Repair - Trade-In
Established in 2005, Axiom Test Equipment strives to continually improve itself
and offer the best value for its customers. We offer our customers several practical,
efficient and cost effective solutions for their business or projects' test equipment
needs. Whether you need to
rent &
buy test equipment, repair test equipment, sell or trade equipment, we are committed
to providing superior customer service and high quality electronic test equipment.
At Axiom Test Equipment we provide several services. We
rent electronic
test and measurement equipment. We also sell test equipment. If you have a piece
of malfunctioning or broken test equipment we also have an in-house repair lab.
For anyone seeking a way to offload their surplus or obsolete equipment, we offer
a trade-in program or we can buy the equipment from you.
We stock a comprehensive inventory of equipment and can use our extensive network
to find you those hard to get items. We believe in getting equipment to you quickly
and at a competitive price.
Contacts
Fabian Garcia Marketing Coordinator Axiom Test Equipment 2610 Commerce
Way Vista, CA 92081 Phone: (760) 806-6600
RF Cafe began life in 1996 as "RF Tools" in an AOL screen name web space totaling
2 MB. Its primary purpose was to provide me with ready access to commonly needed
formulas and reference material while performing my work as an RF system and circuit
design engineer. The World Wide Web (Internet) was largely an unknown entity at
the time and bandwidth was a scarce commodity. Dial-up modems blazed along at 14.4 kbps
while tying up your telephone line, and a lady's voice announced "You've Got Mail"
when a new message arrived...
Copyright 1996 - 2026
All trademarks, copyrights, patents, and other rights of ownership to images
and text used on the RF Cafe website are hereby acknowledged.
Get Exactly What You Need. Rent - Buy
- Repair - Trade-In