|
San Diego, California – October 11, 2024 -
TotalTemp Technologies
offers advanced and innovative methods for meeting and optimizing your thermal testing
requirements. We specialize in benchtop thermal testing because small batches are
typically the most cost-effective approach. We offer heat transfer by conduction
with thermal platforms, forced convection as in traditional temperature chambers,
combined systems, and
thermal vacuum for Space Simulation.
SD144/288N Dual Zone Thermal Platforms Cryogenically
Cooled
Thermal Platforms Temperature Range –100°C to +200°C (L-N2)
Thermal testing of Traveling Wave Tube Amplifiers and other devices with dramatically
uneven power dissipation can easily be achieved with a dual zone thermal platform.
Managing the heat produced by the electron gun side allows for the RF outputs side
to be tested at various required temperatures. The
Dual Zone Thermal
Platforms allows the user to maintain safe controlling temperatures on either
end of the device using a single
Synergy Nano Temperature Controller.
The Traveling wave tube at the right is shown clamped with
Light Duty Dual Clamp Set set. Sold as an option and mounting to standard platform
hole patterns allows prototype work be performed with ease. The clamping force can
be adjusted as needed to effectively hold the device under test to the thermal platform.
Also shown here with a Low ESD Polycarbonate Probing Cover. Purge gas options reduce
moisture and contaminants.
Space Environment Testing
Cooled
 Mission critical transponders in orbiting communication
satellites, network command / control centers are good candidates for testing on
a dual zone thermal platform.
TotalTemp Technologies has developed thermal dual zone test equipment (image
to the right) for either the (SSPA) Solid State Power Amplifier or the higher wattage
(TWTA) Traveling Wave Tube Amplifier for many applications. The United States Air
Force, Army and Navy, NASA, JPL and others use these platforms for the testing of
various solid state amplifiers, oscillators, antennas and antenna arrays, phase
shifters and in particular ultra-high efficiency TWT amplifiers. On the ground ,
in the air or space, TotalTemp helps facilitate required environmental testing.
Dual Thermal
Platforms SD144-N (image to the right) features valves which are remotely housed
in order to allow for these 12 x 12 inch Thermal Platforms to be orientated vertically
without affecting the orientation sensitive cryogenic valve assembly. The controller
is able to control both platforms and is installed in a 3U19 inch rack panel in
this example of a very successful product we offer.
TotalTemp Technologies is here for you. We are happy to help you with the finer
details of making the best use of logging data or other features to meet your requirements
and get the best use of the test equipment.
About TotalTemp Technologies
The primary goal for TotalTemp is to maximize the combined 40 years experience we
have in this highly specialized field and create a new, alternative, "Next Generation"
Thermal Platforms and Temperature Testing equipment. Our Mission is to offer thermal
testing equipment that best suits or customers' requirements. For several decades
there were only two real manufacturers for thermal platforms. It was no secret that
the market demanded a new alternative with better service and lower costs. We heard
you loud and clear and TotalTemp is here to fill that need.
Contact:
TotalTemp Technologies
3630 Hancock Street A
San Diego, CA 92110
Phone: 1-888-712-2228
E-Mail:
Sales@TotalTempTech.com
Web: www.totaltemptech.com
|
