|
Broad Connector Choice Semi-Flexible
Alternative to Semi-Rigid
- DC to 60GHz Solutions
- Low Loss & Low VSWR
- Multi-Layer 95dB Screening
- Laminated PTFE Dielectric
- Operating Temp up to 125ºC
- Meets requirements of MIL-C-17
- Broad Connector Choices
Download Datasheet HERE |
|
|
ConductRF's FPA RF Cable Assemblies provide a cost effective high performance solution for
applications typically supported by Semi-Rigid or high cost flexible precision cables. Our Multi-layer
shielded cable provides both flexibility and form-ability by combining a flexible spiral foil over which
is a tin plated copper braid which can be formed. This create a half-way situation, but with added benefits
of lower costs, improved performance and enhanced shielding.
|
|
Broad Connector Choice
FPA Cables are available on short lead-times with custom lengths and configurations. Precision
SMA, 3.5 mm, 2.92 mm & 2.4 mm are our most common standards. All finished assemblies are 100%
validated through VNA testing prior to delivery to factory or customer defined performance standards.
|
 |
 |
High Performance R/A SMA Cables
Using our Low Profile 27 GHz SMA "Swept Cable" configurations, ConductRF can provide R/A Assemblies
with no VSWR drop when compared with equivalent straight connector solutions operating up to 27 GHz.
It is common to produce R/A Assemblies with VSWR of 1.20:1 or better.
|
|
High Performance Multi-Layer Shielded Cable
ConductRF provides two standard cable size options using our own cable; A28RFJ (ø0.086") & A29RFJ (ø0.141").
These cables are built to with Multi-layer shielding consisting of a silver plated spiraled tape layer
over which is a tin plated copper braid. Oxygen Free High Conductivity copper is used for Conductor
and braid layers to maximize performance. Along with a Low Loss laminated PTFE dielectric and
an FEP Jacket, assemblies built with these cable can operate with high stable performance in temperatures
up to 125ºC.
|
|
 Easy
Part Number Build
1. Using our two common cable types, let us know if you want an FPA28 (ø0.086") or FPA29(ø0.141")
cable.
2. Then describe your preferred connector range selection and configuration.
3. Finally describe the length in the units of your choice.
|
|
Find Much More at
www.ConductRF.com
ConductRF offers two complete range of RF Connectors for Commercial & Mil/Aero applications.
With a wide array of cable assembly selections using ConductRF can help narrow down your needs to the
perfect solution for System of Test. Go to www.ConductRF.com
and see our full range of capabilities. Alternatively
email us with your
requirements and we will get back to you within 24 hours with your solution.
Note: LMR is a Times Microwave System Trade Mark. ConductRF exclusively
uses Times Microwave LMR products in the manufacturing of this series of cables.
|
|
Contact Info
ConductRF-EAM 126 Merrimack Street Methuen MA, 01844 - US Telephone: +1
978 374 6840
|
About Conduct RF
ConductRF is the brand name for Electronic Assembly Mfg. Inc's complete RF interconnect product
line including cable assemblies. Operating out of Methuen, Massachusetts, EAM has been in the RF Interconnect
industry for nearly 20 years, successfully supporting high performance solutions that require precision
and expertise to bring to life. Our ConductRF brand builds on this expertise with an expanded product
offering, including both commercial and precision RF coaxial connector ranges as well as the capability
to support customized solutions with our Application Engineering focus. We can provide diverse manufacturing
solutions with our capabilities in the U.S. as well as Asia from where support low cost volume coax
production requirements.
Posted May 19, 2017
|
