|
Here are 2018 press release archive pages:
1 |
2 |
3
 Triad RF Systems, a top-tier designer and manufacturer
of RF and microwave amplifiers, announces the introduction of their
TTRM1123 high power bi-directional amplifier (BDA) that utilizes the latest LDMOS
technology to provide over 60 W of linear power in S-Band. The unit is designed
to be integrated in any system that requires high power, high efficiency and high linearity
in the entire 2200 - 2500 MHz band. In transmit mode, the amplifier provides
28 dB of small signal gain and can produce over 10 W of 64 QAM OFDM power across
the band! In receive mode, the unit has 11 dB of small signal gain with a noise
figure of 2 dB. The unit can be configured to auto switch to transmit when RF is present ...
 Fairview Microwave Inc., a leading provider of
on-demand RF and microwave components, has unveiled a new line of
seamless and twistable
flexible waveguides covering 10 frequency bands from WR-137 to WR-22 and operating
in the 5.85 GHz to 50 GHz range. Typical applications include base stations,
DAS systems, antennas and test instrumentation. Fairview Microwave's new line of flexible
waveguides consists of 78 models - 39 seamless and 39 twistable, all operating in the
same wide range of frequencies. All models are offered with UG-style square/round cover
and CPR-style flanges, and are available in lengths of 6 to 36-inches ...
 Skyworks Solutions, an innovator of high performance
analog semiconductors connecting people, has unveiled its latest cellular infrastructure
innovation, the
SKY66313-11, a wide instantaneous bandwidth power amplifier with
industry-leading efficiency for FDD/TDD 4G LTE and 5G applications. This breakthrough
solution is utilized in small cell and massive MIMO base stations to deliver higher data
rates and enhanced network efficiency that result in improved carrier capacity and greater
coverage for data-intensive, multimedia and Internet of Things devices. The amplifier's
highly efficient design boasts fully-matched input/output and high gain for best-in-class
operation. With an integrated on-chip active bias circuit, the device provides excellent
performance over temperature ...
 Axiom Test Equipment, a premier provider of electronic
test and measurement equipment rentals and sales, has posted a white paper titled, "Analyzers Open Eyes to Optical Measurements." Optical communications
systems are highly regarded for their generous bandwidths and capabilities of transferring
massive amounts of data during extremely short transmission times. Of course, those systems
rely on durable, high-performance components connected by single-mode (SM) and multi-mode
(MM) cables, which must be checked and maintained at regular intervals. That can be done
using fiber-optic test equipment designed specifically for the task ...
Anatech Electronics February 2018 Product Update
Axiom Test Equipment Blog: Taking Proper Measure to Ensure Safer Products
Axiom Test Equipment Late February 2018 Specials
Saelig Launches New Crystal Oscillators with Four Switchable Frequencies and Low
Jitter
Mini-Circuits January 2018 News & Product Highlights
Axiom Test Equipment February 2018 Specials
Anatech Electronics February 2018 Product Update
KR Electronics Intros 1208 MHz Surface Mount Lowpass Filter
 Triad RF Systems, a top-tier designer and manufacturer
of RF and microwave amplifiers, announces the introduction of their
TA4002R RF power amplifier, designed for the 4,000 to 5,000 MHz
frequency band with an output power of 10 watts. The TA4002R utilizes the latest
GaN technology to provide 10 W of power in the C-1 and C-2 bands. The unit is designed
to be integrated in any system that requires high power, high efficiency and high linearity
in the entire 4,400 MHz to 5,000 MHz band. The amplifier provides 23 dB
of small signal gain and can produce over 2 W of 64 QAM OFDM power. The compact
unit measures only 2.73 x 2.53 x 1.31" and maintains a low operating temperature due
to its built-in heat sink ...
 Anatech Electronics, Inc. offers the industry's
largest portfolio of high-performance standard and customized
RF and microwave filters
and filter-related products for military, commercial, aerospace and defense, and industrial
applications up to 40 GHz. Anatech has introduced three new filter designs: a surface
mount 2050 / 2250 MHz Ceramic Duplexer, a surface mount 62.5 MHz IF SAW Filter, and a
537-563 MHz / 2432-2480 MHz Duplexer with N-type connectors. Custom RF filters designs
are used when a standard cannot be found, or the requirements are such that a custom
approach is necessary ...
 Advanced Test Equipment Corporation (ATEC) today
announced the launch of a new line of RF and microwave power amplifiers.
Advanced Amplifiers is a provider of next generation solid state RF power amplifiers
and microwave amplifiers, offering continuous wave and pulse amplifiers with a variety
of frequencies and power. Launched by Advanced Test Equipment Corp., a rental and sales
industry leader in test and measurement equipment technology, Advanced Amplifiers offers
"state-of-the-art" technology to a variety of industries. The Advanced Amplifiers line
of ultra-high linearity amplifiers revolutionizes RF power amplifier design with their
unique high-power density and small size form factor, high energy efficiency and simple
front panel ...
 Transient Specialists, a leader in EMC rentals
for over 30 years, announces that they will be offering rentals, sales and a set-by-step
guide of the
IEC 61000-4-2 setup including all components and cords. This complete
ESD immunity setup includes vertical coupling plane (VCP), horizontal coupling plane
(HCP), ground coupling plane (GCP), ESD table, and all required cords. EN/IEC 61000-4-2
puts forth specific requirements for all components of the setup for this electrostatic
discharge (ESD) standard. This setup can be rented or purchased as a whole, or individually
to enhance a preexisting test setup. The setup includes, an all wood table with removable
legs, vertical coupling plane (VCP), horizontal coupling plane (HCP) ...
 Withwave has introduced
Board Edge 2.92 mm (SMA)
connectors are specially designed for high frequency (DC-40 GHz) substrates
to minimize electromagnetic transition effects from coaxial to Microstrip/CPW structure.
We solve your performance and cost problems with various types of board edge connectors
according to substrate clearance. Board clearances of 0.6 mm to 3.6 mm available ...
 San Francisco Circuits' (SFC) new website provides
customers with the information and tools necessary to effectively work with SFC to build
Printed Circuit Boards
(PCB) that meet demanding design requirements. The site enables users to get a quote
online by providing specifications and uploading designs to SFC using a password protected
customer area of the site. In addition, the website hosts an educational PCB School,
a password-protected learning environment where engineers, designers, and others involved
in the design and use of PCBs can learn about the intricacies of their creation, integration,
testing and more. A number of PCB guides and explainers on key topics are also available ...
 Skyworks Solutions has created a video titled,
"Sky5 Makes 5G Work Video."
It provides a simple explanation of how 5G will work and explores how their Sky5™ platform
resolves system complexities and enables this next generation communication standard.
As a premier provider of wireless front-end solutions, Skyworks is an expert in connectivity.
They are enabling the 5G evolution by advancing our technology leadership and extending
our product reach to power some of the world's most exciting communication platforms.
Skyworks is a member and key contributor to the industry's most influential standards
organizations including ETSI and 3GPP ...
 Fairview Microwave has recently expanded their
line of RF coaxial probes
into the 40 GHz frequency range for use in high-speed communications, microwave components
and networking applications. Fairview Microwave's expanded line of coaxial RF probes
now includes four models that deliver 10 dB maximum return loss over a broad frequency
range of DC-40 GHz. These new RF probes are offered in GS and GSG configurations with
a pitch of 800 or 1500 microns and a 2.92mm interface; they are gold-plated and feature
compliant pogo pin contacts that allow for a wide range of probing angles. These coaxial
probes can be used by hand, with or without a probe positioner, and can be cable mounted
or mounted with Fairview's multi-axis probe positioner. These coaxial RF probes are ideal
for signal integrity ...
 Over the past years, commercial micro and
mini UAVs, known as 'drones',
have become an almost common sight. With the technology becoming ever more affordable,
a greater number of people uses these UAVs for different purposes – especially in amateur
photography, drones have come to deliver spectacular results. Yet, with the emergence
of this trend, potential dangers have surfaced as well. Government facilities, airports,
power plants – these are just a few examples of critical infrastructure that relies heavily
on secured airspace. In the past, UAVs have repeatedly penetrated no-fly zones without
authorization. Furthermore, drones are becoming more and more capable of transporting
potentially harmful payload ...
 Copper Mountain Technologies and Compass Technology
Group are pleased to announce their new
Epsilometer solution for measuring the dielectric properties of materials. This solution
measures dielectric substrate materials at frequencies from 3 MHz up to 6 GHz
and can accommodate sheet specimens 0.3 to 3 mm thick. Dr. John Schultz of Compass
Technology commented, "Unlike previous dielectric analysis technologies, this new method
uses computational electromagnetic modeling to invert the dielectric permittivity and
loss. This represents a significant advance over conventional methods, which use analytical
approximations and are limited to frequencies below 1 GHz." With the launch of Epsilometer,
Copper Mountain Technologies delivers another solution that combines its metrology-grade ...
 Skyworks Solutions, an innovator of high performance
analog semiconductors connecting people, places and things, has published a new white
paper titled, "5G New Radio Solutions: Revolutionary Applications Here Sooner Than You
Think." It is available free for downloading. With a cover as nice as this is, it
has to be good ;-) "As demand grows for ubiquitous wireless connectivity and the promise
of new and previously unimagined applications – such as autonomous vehicles, artificial
intelligence, telemedicine and virtual reality – so does the anticipation for 5G. 5G
will be revolutionary, delivering higher data throughput, extremely low latency and speeds
up to 100 times faster than 4G. As a result, 5G is moving toward commercial reality faster
than many expected ..."
 A partnership of three Cornish companies has secured
funding of £148,000 to develop state-of-the-art technology to enable faster and more
accurate communication with satellites.
Flann Microwave,
Teddington Systems and Goonhilly Earth Station Ltd will be working together to create
miniaturised components for the next generation of tiny communications satellites, known
as nanosatellites and CubeSats. Bristol-based Thales Alenia Space will support the project
with advice on end-user acceptance aspects and environmental aspects. The project is
expected to create 14 new jobs and is a further boost to Cornwall's ambitions to develop
space sector manufacturing, servicing and launch capabilities ...
 Empower RF Systems will demonstrate a suite of
high power solid
state transmitting amplifiers at the 55th Annual AOC International Symposium and
Convention - Washington, DC November 27 – 29th , 2018. The equipment suite consists of
the models 2162, 2170, and 2215 providing compact and rugged EA, communications, and
threat emitter capability from 20 to 6000 MHz, and will be housed in Los Angeles while
being controlled and monitored by the Empower booth demonstration team who will be exercising
the system software demonstrating capabilities of the configurable amplifiers ...
 Rohde & Schwarz USA (R&S USA) has produced
a primer titled, "Fundamentals
of Modern Vector Network Analyzers - Primer." One of the most common measuring tasks
in RF engineering is the analysis of circuits, from simple filters and amplifiers to
complex satellite communication modules. As an extremely versatile test instrument, a
VNA is the ideal equipment for quickly and precisely uncovering signal integrity problems,
such as reflections and crosstalk. This primer describes the fundamentals of vector network
analysis, as well as practical instructions for improving accuracy, performing calibration,
and making typical linear and time-domain measurements. In this primer you will learn
about: Introduction to Network Analyzers Scattering Parameters ...
 ConductRF's
SiteFlex range of ruggedized
Field RF Test Cables are designed Field Test Engineers working in applications that require
on site RF Testing. These cables are directly compatible with Hand-Held Network and Spectrum
analyzers. Common options include: DC to 7 GHz, DC to 9 GHz, DC to 18 GHz,
DC to 27 GHz, DC to 40 GHz, and DC to 50 GHz. ConductRF's
Site-Flex RF
Field Test Cables have been designed to support Handheld RF & Microwave Analyzers.
The ruggedized construction includes anti-torque connectors that are firmly attached
to the cables external armor. Crush resistant SF series cable can withstand 1,200 lbs.
/ sq.in. Additional configurations and lengths are available on request ...
 Anatech Electronics, Inc. offers the industry's
largest portfolio of high-performance standard and customized
RF and microwave filters
and filter-related products for military, commercial, aerospace and defense, and industrial
applications up to 40 GHz. Anatech has introduced three new filter designs: a 1533
MHz cavity bandpass filter with SMA connectors, a 850 MHz LC bandstop notch filter
with SMA connectors, and a 698-942/1710-2145 MHz single in/out duplexer filter with
N-type connectors. Custom RF filters designs are used when a standard cannot be found,
or the requirements are such that a custom approach is necessary ...
 Triad RF Systems has published their 4th quarter
newsletter for 2018. In addition to presenting new RF amplifier products for CubeSats,
defense, and aerospace applications, they are proud to announce their inclusion in the
prestigious Fortune 5000
list of companies - #2839 to be exact, which is quite an accomplishment given the millions
of companies out there. Also, Mr. Patrick Sherlock is the new VP of Business Development
at Triad RF Systems. Sounds to me like a lot of good news from Triad RF Systems ...
 ConductRF's
Hi-Flex VNA Test Cable
Series offers customers superior solutions for applications up to 70 GHz. Excellent
class leading phase & amplitude stability for dynamic high-frequency testing, demonstrated
by Internal flex testing results of better than +/-5° & +/-0.05 dB respectively
over repeated 8 hours flexing cycles. With a light armor internal stainless steel construction
along with a soft FEP external cover, and a Nomex weaved covering, this combination provides
excellent flexibility and ruggedness and is industry leading in its stability under flexure.
Available connector solutions include 1.85mm (V connectors), 2.4 mm, 2.92 mm
(K connectors), 3.5 mm and Type-N. Swept right angle versions are available offering
the same high performance of their straight counterparts in both ...
 Axiom Test Equipment, a premier provider of electronic
test and measurement equipment rentals and sales, is now accredited in accordance with
ISO/IEC 17025:2017
requirements from the ANSI-ASQ National Accreditation Board (ANAB). This high-level accreditation
is awarded to labs that have demonstrated technical competence, systematic approaches
to procedures, and traceability of measurements to national standards. Shannon Johnson,
Axiom's Vice President of Operations states, "Achieving 17025 accreditation is an important
milestone for the growth of our business and expands the capabilities ..."
 Kaelus, a leading supplier of high-quality, PIM
test and measurement instruments and RF conditioning solutions, has debuted
PIM Finder, software designed to accurately identify and locate external
PIM sources outside antenna infrastructure. Used in combination with the Kaelus iVA Cable &
Antenna analyzer and the iPA portable PIM analyzer, PIM finder is a software option available
through Kaelus Unify, used to pinpoint and detect external PIM sources such as loose
mounting and cable brackets, fasteners, parapet walls and more, while allowing for the
elimination of key causes of PIM interference. "LTE and 5G high data rate modulation
schemes require clean spectrum to operate to their potential," said Tony Langelaan, Product
Line ...
 Anatech Electronics, Inc. offers the industry's largest portfolio
of high-performance standard and customized RF and microwave filters and filter-related
products for military, commercial, aerospace and defense, and industrial applications
up to 40 GHz. Anatech has introduced three new filter designs: a combination 12-20 MHz
bandstop / notch filter with SMA connectors, a 8.5-18 GHz highpass filter with N-type
connectors, and a surface mount 4,450 MHz ceramic bandpass filter. Custom RF filters
designs are used when a standard cannot be found, or the requirements are such that a
custom approach is necessary ...
 San Francisco Circuits, a leading provider of printed
circuit board fabrication and assembly, has published an application note titled, "How
to Improve PCB Design for Bluetooth Circuit Boards." Their experience in assisting
customers in successful layouts for substrates operating in the RF frequency realm. How
to Improve PCB Design for Bluetooth Circuit Boards Bluetooth Circuit Board Design Guidelines
Printed circuit boards with Bluetooth technology can be problematic with interference,
lost data and poor signal integrity if certain precautions aren't taken. We'll outline
many rules and guidelines to consider when choosing Bluetooth technology for a given
application and, more specifically, designing it into a circuit board. A variety of applications
utilize Bluetooth, including: Beacons used in shopping malls ...
 Skyworks Solutions, an innovator of high performance
analog semiconductors connecting people, places and things, is excited to share that
several of Skyworks' innovative solutions have received top honors from
Mobile Breakthrough.
Mobile Breakthrough recognizes the world's best mobile and wireless companies, products
and people based on selections from an independent panel of experts within the wireless
industry. It is an honor to have been selected from amongst over 2,200 nominations for
developing leading-edge technology. Skyworks' family of advanced GNSS low-noise amplifier
front-end modules, which were named "GPS-based Solutions of the Year," provide global
manufacturers with a compact, turnkey connectivity ...
 Transient Specialists, a leader in EMC rentals
for over 30 years, announces that they will be offering continued support for
electrostatic discharge
products. There are a variety of ESD simulators, or ESD gun manufacturers, however
it is crucial to consider the application when selecting a gun. Having the ability to
buy or rent components to enhance testing capabilities could pay dividends down the road.
Many simulators, including the Dito, NSG 437, and ESD3000 have the ability to remove
and change discharge networks. This allows for additional testing beyond the 150 pf
/ 300 Ω the commonly tested to IEC 61000-4-2. Transient Specialists conveniently
located in the mid-west offers a variety of EMC test equipment rentals to accommodate
your testing needs ...
 Anatech Electronics, a manufacturer of RF and microwave
filters, has published its October newsletter. In it, Anatech founder and owner Sam Benzacar
discusses the finally come-of-age
Microelectromechanical systems
(MEMS) switch for RF use. A MEMS switch is smaller and lighter than any other switch
technology, has very little insertion loss, provides very high isolation, can theoretically
operate into the millimeter-wave region, and can handle substantial amounts of RF power.
RF MEMS switches' Achilles heel at the moment is relatively low isolation (~25 dB)
compared to other types of RF switches. Sam also includes some relevant telecomm industry
headline news ...
 Skyworks Solutions, an innovator of high performance
analog semiconductors connecting people, places and things, today announced that its
advanced wireless engines are enabling
Philips' CityTouch
end-to-end street lighting management platforms. Specifically, Skyworks' connectivity
solutions provide superior efficiency, extended range and complete network coverage to
facilitate seamless communication between Philips' smart street lamps and cellular base
stations. These innovative devices allow city operators to reduce power consumption and
support public safety through adaptive scheduling and remote services. Installations
of CityTouch have commenced worldwide, fostering more livable ...
 ConductRF offers an extensive line of
RF and mixed
signal cable harnesses and assemblies with custom configurations, lengths and markings.
Thousands of combinations of coaxial, power, and digital and analog signal connectors
available. Flexible phase-stable, low-loss, phase-matching, high power, and other options
per your requirements. Broad insert connector solution choices including BMA, SMPM, for
cable sizes #8, #12 & #16 Custom marking and ruggedization enhancements capability.
Contact ConductRF today and let us help your project ...
 Triad RF Systems has shipped their latest
L-Band
DUAL Bi-Directional Amplifier (BDA), the TTRM1081D. This unit is compatible with
all military and commercial radios and provides over 25 W of RF power across 1.3
to 1.4 GHz. Made specifically for MIMO radios, providing 2 radio and 2 antenna ports,
each providing 5 W of 64 QAM power or 20 W of BPSK power. The BDA operates
off a single +28 V supply and provides 25 dB of TX gain and 11 dB of RX
gain in both channels. It is available with automatic or manual switching, depending
on the radio system ...
 Anatech Electronics offers the industry's largest
portfolio of high-performance standard and customized
RF and microwave filters
and filter-related products for military, commercial, aerospace and defense, and industrial
applications up to 40 GHz. Anatech has introduced three new filter designs: a surface-mount
45 MHz IF SAW filter with a 10 MHz bandwidth; a surface-mount 2050 ceramic
bandpass filter with a 900 MHz bandwidth; and a 2037.5 MHz cavity bandpass
filter with a 12 MHz bandwidth and SMA connectors. Custom RF filters designs are
used when a standard cannot be found, or the requirements are such that a custom approach
is necessary ...
 Copper Mountain Technologies' VNA software is now available for Linux
OS, specifically for Ubuntu and Mint distributions. The CMT VNA software for Linux includes
all the same features as our VNA software for Windows. Any CMT VNA can now operate in
a Linux environment, whether it is controlled manually or its operation is automated
using SCPI commands via TCP/IP sockets. A first in the industry, Copper Mountain Technologies'
USB VNAs operating in Linux OS extend the reach of engineers who can now incorporate
precision VNAs into their Linux test environment. Test
Drive Copper Mountain Technologies software without needing to have the physical hardware ...
 Rohde & Schwarz USA (R&S USA) has produced
an Educational Note titled, "Modulation
and Signal Generation with R&S® Signal Generators." Signal generators play a
vital role in electrical test and measurement; however, choosing the right one often
requires a look beyond the banner specs. This application note does exactly that. How
do analog-, vector- or arbitrary signal generators work? What are the parameters to look
at? What important information is not obvious from the datasheet? And how do I generate
a modulated signal? Download this application note and find out more about: What a Signal
Generator is and why you need one What types of Signal Generators ...
 KP Performance Antennas, a manufacturer of wireless
network antennas, has debuted its new
ProLine
antennas, a series of high-performance parabolic and sector antennas that are perfectly
suited for high-density, point-to-point, point-to-multipoint and backhaul applications.
KP's new ProLine parabolic antennas are engineered to deliver high, stable gain over
wide bandwidths with side-lobe and back-lobe suppression for mitigating inter-sector
interference. These 5 GHz antennas are available in 1-foot and 2-foot diameters
with gain performance of 24 dBi and 29 dBi respectively. Single-band and dual-band
options are available in 2.3-2.7 GHz, 3.5-4.2 GHz and 4.9-6.4 GHz ...
 Empower RF is pleased to announce the release
of Model 2223, a single band solid state GaN system amplifier, capable
of delivering a minimum 150 W across its entire 0.6 to 6 GHz band. Equally
suited for the production floor, engineering lab, or anechoic chamber, the 2223 comes
complete with internal DDC, external forward and reverse sample ports, and an easy to
use web served GUI with dedicated features for simplifying integration into your test
application. For Machine to Machine (M2M) applications the 2223 utilizes TCP/IP or UDP
protocol sockets. In depth health monitoring with alarms visible on the front panel are
also pushed out the LAN port ...
 Transient Specialists, a leader in EMC rentals
for over 30 years, announces that they will be offering additional testing capabilities
for IEC 60601-1-2. The Compliance West MegaPulse in addition to the already existing
surge, EFT, ringwave, dips, automotive and conducted RF will continue to make Transient
Specialists a resource for
Medical EMC test equipment. Transient Specialists conveniently located in the mid-west
offers a variety of EMC test equipment rentals to accommodate your testing needs. Our
rentals include technical support on the equipment, weekly and monthly rentals, and 2
days ...
 ConductRF offers a diverse range of solutions
for common applications including
Low PIM cables. Flexible and hand-formable, corrugated, multiple
connector and cable combinations. ConductRF has a wide range of "Performance" related
solutions built and 100% tested up to 70 GHz at our own facility. If your solution
requires Low Loss or VSWR or if you have ruggedization or waterproofing needs, we see
this as a performance solution which requires our expertise to turn in to finished product
solution for you. Built in the USA ...
 Rohde & Schwarz USA (R&S USA) has produced
a primer titled, "Spectrum Analyzer Fundamentals - Theory and Operation of Modern Spectrum
Analyzers." This is a very comprehensive work that covers basic operation and analysis
and includes application to modern communications systems. In this primer you will learn
about: Basics of spectrum analysis, Time and frequency domains, FFT analyzers, Analyzers
using the heterodyne principle, settings for using a spectrum analyzer, Nonlinear devices
under test, crest factor and complementary cumulative distribution function (CCDF), Phase
noise measurements, and Mixers and mixer measurements ...
 In the IoT world, time to market is essential
and developing a new product has enough hurdles as such. PulseLARSEN has therefore developed
the IoTest™ kit
(powered by Copper Mountain Technologies) to accelerate the process of embedding antennas
in your product, to evaluate your antenna performance, to compare to existing PulseLARSEN
antennas, and to consult experienced antenna professionals if any further assistance
is required. This kit is extremely mobile, easy-to-carry, and becomes the ideal toolbox
for technical sales or FAE on the field or engineers in tight spaces. Self installing
software is included and its user-friendly GUI will guide you through the multiple possibilities
this kit offers. View the webinar now ...
 NuWaves Engineering, NuWaves Engineering, an international Radio
Frequency (RF) and Microwave solutions provider, announces the release of a new ruggedized,
high-performance low noise amplifier, the HILNA™ GPS C034. The
HILNA™ GPS
C034 is a broadband low noise amplifier designed to achieve high gain while maintaining
low noise and a high third order intercept point, and is specifically targeted for the
L1 (1575.43 MHz) and L2 (1227.6 MHz) GPS signals. This ruggedized, high-performance module
delivers 32 dB of gain across the frequency range of 1200 MHz to 1600 MHz with an OIP3
of +30 dBm and less than 1 dB of noise figure. The HILNA™ GPS ...
 Saelig Company announces the availability of the
TekBox TBMDA3 and TBMDA4 Modulated Wideband Power Amplifiers which have been specifically designed
to provide an economical signal source for immunity testing of electronic circuits and
products. While these amplifiers are intended to increase the output of a spectrum analyzer's
tracking generator, they are also useful as general purpose wideband RF signal amplifiers.
The TBMDA3 and TBMDA4 are ideal for driving near-field probes in order to find sensitive
spots on electronic circuits, or for creating strong electric fields of up to 550 V/m
when driving TEM Cells. With an input power range of -5 dBm to 0 dBm, they
can boost signal power up to 5 MHz ...
 Transient Specialists, a leader in EMC rentals
for over 30 years, announces that they will be offering additional rental inventories
of the complete automotive immunity test system components by EM Test. This complete
immunity setup includes the
VDS200N,
LD200N,
and UCS200N
providing testing to ISO 7637, SAE, GMW and many others. Transient Specialists conveniently
located in the mid-west offers a variety of EMC test equipment rentals to accommodate
your testing needs. Our rentals include technical support on the equipment, weekly and
monthly rentals, and 2 days each way of transit time free with each rental. With the
experience and equipment ...
 Skyworks Solutions,
Inc. (NASDAQ: SWKS), an innovator of high performance analog semiconductors connecting
people, is pleased to introduce our newest family of compact, high performance
RF front-end solutions
specifically designed for LPWAN and high-power Industrial, Scientific, Medical (ISM)
applications including the connected home, M2M, tracking and other emerging IoT platforms.
These highly integrated modules support LoRa®, SigFox and other unlicensed band technologies,
occupy minimal board space and are power efficient, making them ideal for sensors, beacons,
smart watches, thermostats, wireless cameras, medical pendants and smoke and CO detectors ...
 ConductRF VNA series provides customers with reliable
ruggedized solutions for Lab
and Production Vector Network Analyzer testing. With options for 18 GHz, 26.5 GHz, &
40 GHz these cables offer cost leading alternatives to original OEM VNA cable solutions.
VNA Series cables are enhanced with a stainless steel spiral armor, providing protection
from excess bending and crushing forces. A black non- conductive outer cover completes
the product. These cables are phase stable during flexing and have an operating life
cycle of up to 5,000 matings when correctly operated and maintained. Connector options
available for male and female interfaces include 2.4 mm, 2.92 mm, 3.5 mm,
SMA and N ...
 Anatech Electronics (AEI) proudly announces that it has received ISO 9001:2015 Certification!
We are also officially ITAR Registered with The Office of Defense Trade Controls Compliance.
manufactures and supplies RF and microwave filters for military and commercial communication
systems, providing standard, custom RF filters, and RF products. Our standard RF
filters are based on previously designed RF filters, drawn from our technical database,
and published on our website for ease of procurement. Custom RF filters designs are used
when a standard cannot be found, or the requirements are such that a custom approach
is necessary. Our products include all types of RF filters, and microwave filters ...
 Electro-Photonics LLC, a market leader in RF and
Microwave components has released a
ProbePads 05, a coplanar waveguide-to-microstrip transition. Our
new ProbePads 05 (P/N: PPS-005-01) can be used for many on-wafer measurements, device
characterizations and microwave integrated circuits. This 5 mil thick CPWG to microstrip
transition is made from 99.6% Alumina with a total thin-film process. The ProbePads 05
are manufactured in the USA and are RoHS compliant ...
 VidaRF is offering a line of
coaxial
isolators and circulators covering frequencies from 150 MHz to 40 GHz,
with reflected power levels up to 250 W. Coaxial (SMA, SMP, BNC, N, TNC, 7/16, and
more), drop-in, surface mount, and waveguide configurations are available. Low intermodulation
products (-80 dBc), low insertion loss, and high isolation are standard. Painted
and sealed to IP65 standards, and RoHS compliant. Contact VidaRF today to learn how they
can help your project succeed ...
 Copper Mountain Technologies and PulseLARSEN Antennas
released the
IoTest™
kit, which helps designers of IoT devices select and test the right antenna for the
project. The kit includes a Copper Mountain Technologies' P60 Antenna Analyzer, antenna
testing software specifically designed for users with little to no RF testing experience,
sample antennas, and cable assembly and adapters to connect antennas to the Analyzer.
The IoTestsoftware is easy to use and walks users step-by-step through connecting the
antenna, calibrating the analyzer, testing sample antennas in the kit, and comparing
results with memory traces for each sample antenna saved in the software. In support
of Central Indiana's focus on IoT, Copper Mountain Technologies provided one IoTest kit
to Indiana IoT Lab in Fishers for use by its resident companies in IoT product design ...
 ConductRF offers D38999 RF coaxial cable assemblies
for D38999 Mil-Spec applications
including military, aerospace, automotive, and harsh environment up to 65 GHz. Let
us apply our vast experience to quickly build your custom harnesses and assemblies for
RF and mixed signal technologies. Custom configurations, lengths and markings, flexible
phase stable and low loss solutions, phase matching capabilities, high power cable options
with broad insert connector choices (BMA, SMPM, Sizes #8, #12, & #16). Contact ConductRF
today ...
 Rohde & Schwarz USA (R&S USA) is hosting
a free seminar on the topics of
LTE-M and NB-IoT on September 27th, 2018, in Wilmington, DE. Internet
of Things (IoT) is expected to dominate the telecom market where machines exchange data
for intelligent applications. Devices and networks supporting IoT pose unique challenges
such as low power, low cost, low mobility, and long battery life. This course addresses
several low power wide area (LPWA) network technologies defined by 3GPP to meet these
requirements. 3GPP defined LPWA technology options include LTE-M (or enhanced machine
type communication) and Narrowband IoT (NB-IoT) ...
 ERZIA Technologies announces availability of the
ERZ-HPA-0850-0980-53
pulsed, High Power Amplifier (HPA) based on GaN technology and focused for Radar applications
in X-band. It provides 250 W in a compact size and modularity. With this new release
ERZIA increments the high power amplifier family in X-band dedicated to radar applications.
ERZIA produces microwave and mm-wave modular amplifiers and integrated assemblies from
low frequencies up to 100 GHz. More than 100 different standard models, having also
a high capacity of customization for amplifiers and integrated assemblies. Visit ERZIA
in Booth 012 at the European Microwave Week show ...
 ConductRF is offering
phase-stable over temperature
solutions up to 50 GHz for applications ranging from dynamic testing to flexible
or hard line cables for inside systems and modules. We have flexible & semi-rigid
cables that maintain 50 ppm phase accuracy with temperature phase matching. Low
loss & high power cable options. Broad selection of connector options. Custom marking &
armoring available. ConductRF also offers a diverse range of solutions for common applications
including low PIM ...
|
