This wideband GaAs
linear amplifier module is capable of supporting any signal type
and modulation format, including but not limited to 3-4G telecom, WLAN, OFDM, DVB, and CW/AM/FM. Due
to several state-of-the-art circuits, this unit is highly immune from damage due to any out of spec
DC voltage conditions that may be applied. Its rugged construction guarantees fault-free operation in
the most extreme environments
...
Peregrine Semiconductor Corp., founder of RF SOI
(silicon on insulator) and pioneer of advanced RF solutions, announces
that it has been awarded qualified manufacturers list (QML) certification,
class Q (military) and V (space). After
a thorough evaluation, Peregrine demonstrated to the Defense Logistics Agency
(DLA) Land and Maritime that it fully complies with MIL-PRF-38535, the performance specification
used by the Department of Defense for monolithic integrated circuits that operate in severe environments.
"This is a giant step forward for Peregrine's high reliability products and demonstrates our continued
commitment to serving the aerospace and defense market—an industry we have served for over 15 years,"
says Duncan Pilgrim ...
NI (formerly AWR Corporation) announces
a new NI AWR Design Environment™
white paper that describes how Visual System Simulator™ (VSS) system design
software and LabVIEW can co-simulate, enabling system designers to better analyze, optimize, and verify
complex RF systems inclusive of DSP blocks. "Co-Simulation
with Visual System Simulator and LabVIEW for Enhanced Signal Processing" can be downloaded on the
NI AWR website.
Pasternack, a leading manufacturer and supplier of RF, microwave
and millimeter wave products, introduces a large portfolio of in-stock
general purpose multi-market coaxial packaged electromechanical switches for RF, microwave and millimeter
wave applications. These new electromechanical switches are uniquely qualified for use in numerous applications
including military communications, radar, commercial and military aviation, SATCOM, test & instrumentation,
medical equipment and others. Pasternack's newest electromechanical switches consist of 134 connectorized
designs that are guaranteed for 1 million life cycles. These new general purpose switches complement
Pasternack's existing
...
RFMW announces design and sales support for low passive inter-modulation
(PIM) attenuators from EMC
Technology. When comparing the new 33P7024 (100 Watt) series to standard attenuators the difference
is typically ≥ 10 dBc. The 33P702403.00F offers 3dB of attenuation while the
33P702430.00F
offers 30 dB attenuation. Designed for demanding infrastructure applications, both EMC's
33P702403.00F and 33P702430.00F operate to 2.7 GHz with a maximum VSWR of 1.30:1. Featuring a tab
...
In this short video, Saelig's Tech Support Manager Al MacRobbie
introduces the features of Windfreak Technologies'
SynthNV module, a versatile 34.4 MHz - 4.4 GHz USB powered and programmed
RF signal generator / RF power detector. A lot of these USB synthesizers and various types of test equipment
are becoming available, and this is a great way to get a look at the multitude of features they offer
along with small size and relatively low cost ...
Highland
Technology announces the latest release in its line of VME test and measurement modules, the
V410 RTD/resistance
Input Module. The V410 features 16 independent channels configurable for 2-wire, 3-wire, and 4-wire
resistance measurement and capable of measuring from 1 ohm to 3 megohms. This makes the V410 suitable
for 100-ohm and 1000-ohm RTDs, thermistors, and other resistive sensors. It can also read
cryogenic
diodes. Look-up tables are included for 100 and 1000 ohm, 385 and 392 platinum RTDs. The built-in
self-test reports both internal errors and wiring faults. Any channel of the V410 may be switched to
a front-panel D9 test connector for in-crate
...
Saelig Company has introduced the
ABI Electronics'
Multiple Instrument Station MIS4, an all-in-one testing tool that provides all commonly required
test instruments in one compact programmable hardware module, mounted in a compact case or installed
in a PC drive bay. Controlled by ABI's sophisticated SYSTEM 8 Ultimate PC software with a simple yet
programmable operator interface, the
MIS4 combines
eight laboratory instruments: a 3-channel 350 MHz digital storage oscilloscope with sophisticated
triggering options and automatic measurements; a 1.1 GHz frequency counter and three 350 MHz
counters; a 14-bit dual-channel
...
Keysight
offers 230+ measurement applications based on innovative algorithms and up-to-date standards-based capabilities.
Use our new mobile app to easily search by application / technology or instrument, and select the perfect
standalone or embedded test and measurement software for your application. Then help us make this new
app better for you. Try it and tell us about your experience. We'll incorporate your feedback and suggestions
into the next revision ...
The
Software Developer
reports directly to the VP of Engineering, Director of Engineering, or Deputy Director of Engineering.
The Software Developer works closely with the Engineering technical teams and with Program Management
to design, develop, and support software solutions. The Software Developer applies sound engineering
principles to the design, development, and documentation of systems, software and products. The Software
Developer ensures all work carried out is in compliance with company design, quality, and process standards.
Essential Functions: Develops software solutions by studying information needs; conferring with users;
studying systems flow, data usage and
...
NI
(formerly AWR Corporation) announces that the South African Durban University of Technology
(DUT) has adopted NI AWR Design
Environment™ for its RF design course. Expecting a steep learning curve and a semester-long migration
period, Prof. Stuart MacPherson was pleasantly surprised with the software's ease of use and support,
enabling him to completely transition to the new tool even before the semester began. "Implementing
NI AWR software in the DUT RF design curriculum has resulted in the academic level of the course being
advanced and the pass rate being improved," said Prof. MacPherson, associate director at
...
Triad RF Systems has published its first-ever
company newsletter. Two new amplifier products
are highlighted, and an announcement of their planned appearance at the MILCOM 2015 trade show are among
the newsworthy items. Triad RF Systems also has a LinkedIn page titled
UAV Data Links that you are encouraged to join
...
Through its Isolink subsidiary, Skyworks introduces a low-loss,
high performance wideband DC to 8 GHz hermetic GaAs IC single-pole, double-throw (SPDT) absorptive switch.
The ISO13286 is ideal for high reliability space, satellite, and defense applications.
The device performs with 50 dB isolation at 4 GHz and low loss of 1.5 dB at 4 GHz. Testing is available
to the screening requirements of MIL-PRF-38535 Class B and S, in addition to the required QCI. The ISO13286
die is produced with Skyworks' GaAs pHEMT process that has shown
...
Somehow, even with trolling daily for technical headlines, I
managed to miss (until recently) that back in April of this year, IEEE's
Microwave Theory and Techniques Society (MTT-S) acquired the copyright to Phillip Smith's legendary
eponymous graphing format: the
Smith Chart. Per a column by 2015 IEEE president Tim Lee in the
Xplore publication: Mr. Tim
Lee, IEEE's 2015 president. "In 2015, the MTT-S had the opportunity to meet with Mrs. Anita Smith and
her family and propose a way to preserve the legacy of her husband and their father. The MTT-S offered
to buy the rights from the Smith family of the Smith trademark belonging to Analog Instruments, along
with the copyright. In return, the MTT-S would make the Smith chart available to students, practitioners,
and indeed people all over the world involved
...
This is amazing. I remember back in the early 1990s a 10 Msps
DAC was the realm of military radar applications and space electronics, and the cost for a hand-built
hybrid flat pack was about $20k per device. Now, Maxim Integrated has announced the
MAX5869 16-Bit, 5.9 Gsps Interpolating and Modulating RF DAC with JESD204B interface
providing direct RF synthesis with 600 MHz instantaneous bandwidth from DC to greater than 2.8 GHz.
Like I said - amazing. An NDA is required for full details and pricing. I'm sure it's not cheap, but
a heck of a lot less than $20k
...
Skyworks introduces two new global navigation low noise amplifiers.
The SKY65605-21 and
SKY65611-11 are both
designed for BeiDou / GPS / GLONASS / Galileo receiver applications and are optimized to operate from
1559 to 1606 MHz. Each device integrates all output matching components, thereby requiring only a single
external input matching component. Ideal applications include smartphones, personal navigation
...
Antenova, manufacturer of antennas and
RF antenna
modules for M2M and the Internet of Things, has just released two new modules for GPS and GNSS.
Both provide an easy drop-in receiver solution – a neat way to add a location capability to very small
consumer devices. The two modules are similar, both measuring 9.0 x 9.0 x 1.8 mm, with low current
consumption, making them suitable for smaller portable devices, such as smart watches, navigation devices,
OBD II modules, asset tracking ...
"ATEC
is seeking multiple
Entry
Level Inside Sales candidates. Our growing company is seeking multiple strong individuals that can
assist our Inside Sales Department with serving our customers in a fast paced environment. You will
receive and distribute inbound and make outbound calls, via phone and or web from our customers such
as Qualcomm, NASA, Boeing, and other military and contract work. This position can lead into career
path to a Sr. Sales position
..."
Anatech Electronics today introduced the
AD1747-1842D335 cavity duplexer designed for use in wireless communications systems
(Band IV). The duplexer has a receive passband of 1710 to 1785 MHz and transmit passband of 1805
to 1880 MHz, passband return loss greater than 14 dB, and insertion loss of 1.2 dB or
less. Ripple is 0.8 dB or less and isolation is at least 50 dB
...
Skyworks introduces two new global navigation low-noise amplifier
front-end modules with integrated filters: the
SKY65713-11 and
SKY65715-81. Both
solutions support products integrating GNSS functionality such as smartphones, personal navigation devices,
wearables, machine to machine (M2M) systems, base stations, asset tracking instruments, professional
radios and Internet of Things applications. The devices also provide high linearity, excellent gain,
a high IP1 dB, and a superior NF
...
Planar Monolithics Industries (PMI) announces the availability
of new RF/microwave product designs. Included are PMI Model No.
P1T-10M1G-80-T-SFF - an
absorptive, high speed, SPST switch capable of switching within 200 ns maximum for 10 MHz to 1.0 GHz,
PMI Model No. P2T-100M50G-100-T
- an bsorptive, SP2T pin diode switch operating over the 0.1 to 50.0 GHz, and
PMI Model No. P8T-0R5G18G-60-T-SFF-PN
- a high speed, SP8T, absorptive switch is capable of switching within 100 ns for 0.5 to 18.0 GHz
...
EDI
CON USA 2016, taking place September 20-22 in Boston, MA at the Hynes Convention Center, is pleased
to announce their Call for
Papers. Authors are invited to submit technical oral session abstracts/proposals describing
work in RF/microwave, EMC/EMI and high-speed digital electronic component or system-level design, modeling
or testing. The EDI CON Technical Advisory Committee will review all submissions based on quality, relevance,
impact and originality. Prospective authors are welcome to reference products in a design case study
or as a proof of concept for a design methodology, as long as product references are presented in an
appropriately non-commercial fashion. The deadline for abstract submissions is February 28
...
Saelig Company has introduced a new line of
Siglent SDS2000X
Series Digital Oscilloscopes with Super Phosphor technology in bandwidths of 70 MHz, 100 MHz,
200 MHz, and 300 MHz. With real-time sampling rates up to 2 GSa/s, these new scopes feature
waveform capture rates of up to 140,000 wfms/s, record length up to 70 Mpoints, and a 256-level
color and intensity grading display. Together, these technologies have been collectively dubbed by the
manufacturer as "SPO" (Super Phosphor Oscilloscope) technology. The low
noise design supports 1-mv/div to 10-V/div voltage settings, with most of the common adjustments ...
Sivers
IMA today announced that they are launching the next generation converters for
E- and V-band radio links. The new generation converters are based on the company's
proprietary SiGe chip and offer a cost-effective and high-performance solution for those who manufacture
and market radio links. Sivers IMA's new converters are designed to support very advanced modulation
schemes, which enables capacities of up to 10 Gbps. The products are developed for radio frequencies
and applications between 57 GHz to 86 GHz, the so-called V- and E-bands, and will be demonstrated
at the …
everything RF, the leading online website for the RF & microwave
industry, has announced that they have now listed over 150,000 RF & microwave products from the leading manufacturers. everything
RF has developed a parametric search technology which searches through multiple manufacturer catalogs
to find products based on specifications. Engineers no longer need to visit multiple manufacturer websites
to find products that meet their requirement. Users can compare products across companies, download
datasheets, get pricing and request quotations. RFQs generated via everything RF
…
Fairview Microwave a global supplier of on-demand microwave and
RF components, releases new
RF circulators and isolators which are commonly used in radar systems,
wireless communications, DAS, test labs and amplifier systems where sensitive RF equipment would require
protection from reflected signals. Fairview Microwave's 2-port RF isolators are passive ferrite devices
that aid in the protection of sensitive RF components from excessive power reflection. Fairview's RF
isolators are designed with connectorized packages with SMA, Type-N, or 2.92 mm
…
Model
2PA1000
is a new 2-way SMA power divider from Werbel Microwave covering 2-18 GHz continuously in a compact
package measuring 2 x 1 x 0.5 inches with SMA female connectors. Low insertion loss, excellent balance
and high isolation. Great for lab testing environments. Each unit is hand-crafted with pride in the
United States …
Anatech offers the industry's largest portfolio of high-performance
standard and customized RF and microwave filters and filter-related products for military, commercial,
aerospace and defense, and industrial applications up to 40 GHz. Anatech has released three new
connectorized ceramic filter designs: 897/943 MHz duplexer with a 35 MHz bandwidth, a 915 MHz
BPF with a 15 MHz bandwidth, and a 1.88/1.96 GHz duplexer with a 60 MHz bandwidth. All
can be ordered through their AMCrf
web store.
Skyworks introduces a
0.5 to 4.0 GHz LNA with an active bias, offering excellent return loss, low noise,
and high linearity performance for applications including high performance wireless infrastructure,
L and S band military radio, SDAR, DBS set-top box, and GPS. The
SKY67103-396LF
features internal active bias circuitry which provides stable performance over temperature and process
variation. The device also offers the ability to externally adjust supply current and gain. It is ideal
for LTE, GSM, WCDMA, and HSPDA macro base stations; small
…
Pasternack, a leading manufacturer and supplier of RF, microwave
and millimeter wave products, introduces new lines of
ultra-miniature UMCX, WMCX and HMCX32 coaxial cable assemblies. These
low profile, flexible micro-coax jumper cables offer operation from DC to 6 GHz and are ideal for wireless
applications including Wi-Fi, Wireless LAN, Bluetooth, ZigBee, LTE, mini-PCI, mobile antenna/GPS/radio
systems, PDA/PCS/cellular handset application and other wireless communications systems. These cables
are commonly …
Rohde & Schwarz presents its new R&S NRPxxS and R&S
NRPxxSN USB three-path
diode power sensors. The completely redesigned sensors offer unprecedented
measurement speed and measurement accuracy, even at low levels. The R&S NRPxxSN model offers both
a USB and a LAN interface. Both power sensor models are available for three different frequency ranges,
from 10 MHz to 8 GHz, to 18 GHz and to 33 GHz the largest choice of ranges on the
market. Outstanding measurement speed The R&S NRPxxS/SN sensors enable 10 000 triggered measurements
per second with a minimum trigger resolution of 100 µs
…
RFMW announces
design and sales support for the 5SQ series of Tunable Inductors from Frontier Electronics. The 5SQ
series offers the highest Q in the industry (Q=100 for the
5SQ-08). Low insertion loss minimizes roll-off near the cut-off
frequency in low-pass, high-pass and band-pass filter applications. Diplexer designs benefit from the
low insertion loss as well and experience very good stability over temperature. Additional applications
include tuner circuits and oscillators. The 5SQ series tunable inductors have an impressive reliability
history with zero field failures among the 50 million
…
X-COM Systems, LLC, a subsidiary of Bird Technologies, today introduced
the IQC91000A, the only
RF and microwave signal recording and playback system that can capture,
digitize, and store up to 1000 MHz of the electromagnetic spectrum in real time without gaps and missed
signal events within any frequency range from 500 MHz to 18 GHz with 50 dB of spurious-free dynamic
range, the highest in the industry. The entire 1000-MHz signal capture file or selected portions of
it can be regenerated and played back at virtually any desired center frequency and offloaded at high
speed to a workstation for analysis. The IQC91000A is uniquely suited for signals
…
State-of-the-art
digital variable gain amplifiers provide very low power consumption. BeRex today announced
the BVA303 and BVA305, 6-bit DVGA (Digital Variable Gain Amplifiers)
offering high linearity, low noise and require only a single 3V power supply, thereby reducing the power
consumption. Both DVGAs are capable of working at up to 4GHz without external matching components and
are provided in a space saving 4x4mm, 24- pin QFN package. Designed primarily for 3G/4G wireless infrastructure
equipment, satellite radio and other high
…
Werbel Microwave designs and manufactures custom
power dividers
to your specification with no minimum order. The
2PA1500
shown here covers 12-18 GHz with 1.5:1 VSWR, 17 dB minimum isolation and 0.6 dB maximum
insertion loss. Its footprint is only one square inch. SMA female.
Sivers IMA is expanding its radar sensor portfolio by launching
a
77 GHz radar sensor. "The need for measuring distance, depth, speed or position in different
products operating in harsh environments is growing and our radar sensors provide an excellent and cost
effective way of doing that," says Robert Ekström, CEO of Sivers IMA. The new 77 GHz sensor complements
the existing sensors in the 10 and 24 GHz frequency bands. With its higher frequency, it delivers
a signal …
Pasternack Enterprises, Inc., a leading manufacturer and supplier
of RF, microwave and millimeter wave products, welcomes
Mr. Tim Galla as the
company's Product Manager for Active RF Components. Mr. Galla brings 25+ years of product development,
applications engineering and business development expertise to Pasternack from many of the RF/microwave
industry's most recognized names. Mr. Galla has a successful track record of developing and introducing
market-differentiating products and creating new market
Anatech Electronics, a manufacturer
of RF and microwave filters, has
published its January 2015 newsletter. As always, it includes both company news and some tidbits about
relevant industry happenings. This month, Sam Benzacar reports on news about LTE Direct, GaN-on-diamond
substrates for high power devices, the World Health Organization findings on RF exposure levels' effects
on kids' health, and microwaveable food packet technology. He also opines on the topic of "Interference
and the New Year." Being a major manufacturer of filters, Anatech Electronics has a vested
…
Guerrilla RF Inc., a leading provider of high performance MMICs, today introduces
an ultra-low noise
amplifier family with industry-leading noise figure and the highest level of performance. These
new high linearity solutions support a number of wireless infrastructure devices including high performance
small cell LNAs, macro base station LNAs, distributed antenna systems (DAS)
and general purpose LNA applications requiring the absolute lowest possible NF. "We are excited to help
our wireless infrastructure customers obtain maximum receiver sensitivity and improve receiver dynamic
range with minimal external components, which ultimately
…
Horizon House Publications and Microwave Journal China are pleased
to announce that EDI
CON 2015, taking place April 14-16, has added a 5G Advanced Communications Forum to the conference
schedule. The 5G Forum will be a full day of sessions taking place on April 15 at the China National
Convention Center . The 5G Forum will kick off with China Mobile presenting their perspective on 5G
technologies followed by a panel session including experts from organizations such as China Mobile,
Shanghai Tech, Keysight Technologies, Rohde & Schwarz and National Instruments. A
…
RFMW
Ltd. and Qorvo, Inc. have announced
a worldwide distribution agreement effective immediately. Qorvo, a leading provider of core technologies
and RF solutions for mobile, infrastructure and aerospace/defense applications, was created through
the merger of TriQuint and RFMD. RFMW is a specialized distributor providing customers and suppliers
with focused distribution of RF and microwave components as well as specialized component-engineering
support. Under the agreement, RFMW is franchised worldwide for all Qorvo Infrastructure and Defense
Products RF and microwave devices. Qorvo provides standard and custom
…
Bird Technologies, a leading provider of RF components, subsystems,
test equipment, and services, today introduced the
Channel Power Monitor, a compact rack-mount system that in conjunction
with Bird sensors monitors each radio, power combiner, transmission line, and antenna in an analog or
digital land-mobile radio system operating between 144 MHz and 960 MHz. It alerts users to out-of-spec
conditions via the Web or Bird's Android smartphone app and can monitor 16 channels with the ability
to expand as needed to accommodate a radio system of any size. The
Model 3141 Channel Power Monitor simultaneously monitors both the
individual radios of a system as
…
NI (formerly AWR Corporation) announces
the release of its version 12 Analyst-MP™ 3D multiphysics finite element method
(FEM) electromagnetic (EM) analysis software.
This latest version delivers up to 10X improvement in speed from the previous version, making it even
faster for analyzing extremely complex high-frequency, multiphysics structures like the X- and L-band
accelerators designed by Japan's High Energy Accelerator Research Organization
(KEK).
Analyst-MP leverages the same capabilities within NI AWR Design Environment™ V12 - Analyst™ software
but adds to it additional features and functionality that tailor it to large, multiphysics
…
PMI Model No.
PMOD-PWR-1030M-ATN-SFF is a power detector module. The operating
frequency is 1030 MHz ±0.01 MHz. Two pairs of forward and reverse signals are input
allowing for a 12 bit linear digital output proportional to the input power. A GUI is provided to interface
through Ethernet and allow MCU programming, unit calibration and setting of the variable attenuators
…
This free seminar will discuss the new features included in
Keysight's EEsof EDA simulation tools and how the software helps
engineers, focused on high-speed digital electronics, solve their toughest design challenges. The seminar
will look at all stages of the pre-layout, post-layout and measurement design flow. Tools featured in
the seminar include: ADS, ADS Controlled Impedance Line Designer, SI S-Parameter analysis tools, and
the ADS PCIe and USB Test Benches used with Keysight real-time oscilloscope certified Test Compliance
software …
MECA offers a new compact 2 watt (2 kW
peak), 4.1/9.5 (Mini-DIN) Male 50 ohm load optimized for Wireless bands
covering up to 4 GHz. VSWRs of 1.10:1 typical up to 2 GHZ and 1.20:1 typical up to 4GHz. Made in the
USA and carries MECA's industry leading 36 month manufacturing warranty
…
Copper Mountain Technologies (CMT) will showcase its new, high-performance Cobalt
vector network analyzer (VNA) series during European Microwave Week (EuMW) in Paris, taking place September 6-11. In stand 268
at Palais Des Congrès, the company will also demonstrate affordable, lab-grade instruments from each
of its product lines. And, as part of the show's technical program, the company will share highly useful
VNA-based information with attendees inside the MicroApps Auditorium
…
Pasternack, a leading manufacturer and supplier of RF, microwave
and millimeter wave products, unveils a brand new family of instrumentation grade
directional waveguide couplers boasting accurate performance up to
110 GHz. These ultra-high
frequency waveguide couplers are commonly used for signal sampling and other general purpose applications
in wireless transmit / receive systems, test benches, satellite communications, radar systems, point-to-point
backhaul and telecom. In this latest release of waveguide directional couplers from Pasternack are 28
unique models spanning a frequency range of 18 GHz to 110 GHz in seven popular frequency bands
including K, Ka, Q, U, V, E
…
The
R&S FSW85 from Rohde & Schwarz is the company's latest addition
to its successful family of high-end signal and spectrum analyzers. It is ideal for demanding research
and development applications. Thanks to its easy handling, the
R&S FSW85
simplifies complex measurement tasks in the fields of automotive radar, 5G and other wireless communications
standards or aerospace and defense. The new R&S FSW85 high-end signal and spectrum analyzer is the
only instrument on the market to cover the frequency range from 2 Hz to 85 GHz in a single
sweep …
Peregrine Semiconductor Corp., founder of RF SOI
(silicon on insulator) and pioneer of advanced RF solutions, announces
the
UltraCMOS® 11 platform, the industry's first RF SOI technology built
on GLOBALFOUNDRIES' 130 nm 300 mm RF technology platform. By moving to a 300 mm wafer, Peregrine opens
the door to new enhancements and advanced features in future generations of the
UltraCMOS technology platform,
which can leverage GLOBALFOUNDRIES' 300 mm production-proven design enablement and manufacturing expertise
and scale. "As an industry first, the new RF SOI technology reaffirms our commitment to the RF market,
and is another …
Planar Monolithics
Industries (PMI) has introduced two single-pole, single-throw PIN diode
RF switches with coaxial connectors.P1T-DC40G-65-T-292MF-1NS-OPT27 is an absorptive, single pole, single throw PIN diode
switch that operates from DC to 27 GHz. This model incorporates a TTL compatible driver for easy
system integration.
Model No. P2T-6G18G-40-R-570-TFF-1D6KW is a 6.0-18.0 GHz SPDT solid-state switch
capable of handling input power levels up to 1.6 kW peak having a duty cycle of 8% and a pulse
width of 250 us. This switch offers low loss of 2.2 dB maximum and 40 dB of isolation
with a switching speed of 200 ns …
Narda
Safety Test Solutions has expanded the features of its
Interference and Direction
Analyzer: Spectrograms with a time resolution of as fine as 1 μs now allow insights into signal
structures that were otherwise only possible with large scale lab equipment. This means that interference
and hidden transmitters with rapidly changing frequencies can also be analyzed and then localized with
subsequent operating steps. In the
IDA 2's
new high resolution spectrogram display mode, the type of signal, i.e. its "fingerprint", can be
identified. The instrument writes the spectrums line by line, with levels indicated by different colors.
In this way the time and spectral
…
MECA is pleased to announce its latest addition to our extensive
line of Power
Dividers with (80X-X-3.250WWP); broad band models covering UHF through ISM bands. Available in;
2, 4, 8 & 16-Way, 30 W Wilkinson Power Dividers, optimized for excellent performance with industry
leading specifications from 500 MHz – 6.00 GHz. Offering typical VSWR's ranging from 1.20:1
to 1.30:1, Isolation of 17-20 dB minimum while offering phase and amplitude balance typically only
seen in narrower/octave band models. Also available in a variety of connector styles such as Type N
…
Cobham Antenna Systems, a market-leading supplier of antennas, is
proud to announce the sponsorship of the
Liverpool University
Unmanned Aircraft Systems (UAS) team taking part in IMechE's UAS Challenge 2015. Cobham has
supplied antennas, cables, connectors and has provided its expertise to the Liverpool Team. First test
reports, from the team, showed exceptional results with operational range more than doubled when compared
with the standard 'off the shelf' antennas. This improvement in range was prior to installation of a
ground plane for the antenna
…
Planar Monolithic Industries (PMI)
announces two successive detection log video amplifiers (SDLVA). PMI Model
No. SDLVA-418-65-16MV-12DBM operates between the 4.0 GHz to 18.0 GHz frequency
range. It has a dynamic range of 65 dB, a nominal log slope of 16.7mV / dB. PMI Model
No. SDLVA-100M18G-CW-70-MAH is a CW-Immune, Successive Detection Log Video Amplifier
operating in the 100 MHz to 18.0 GHz frequency band. It features an SPST on the RF output
which allows for the RF to be turned off when the RF signal is below the adjustable threshold
setting …
2.4 GHz is a major part of our lives. We see it everywhere: in
our homes, offices, schools, vehicles, and we see it globally. In response to this, Linx Technologies
announces the addition of 2.4 GHz to its already popular permanent-mount
PML
Series half-wave dipole antennas. This new design adds yet more options for antenna design in the
2.4 GHz ISM band.
With multiple standards operating at 2.4 GHz, such as Bluetooth, Thread, Wi-Fi, ZigBee and others, the
vast growth of the Internet of Things (IoT) is driving the added need for more options to antenna design.
Where permanent mount design is needed, the PML
…
Peregrine Semiconductor Corp., founder of RF SOI
(silicon on insulator) and pioneer of advanced RF solutions, announces
availability of the first product from the MPAC product family, the
UltraCMOS® PE46120. Covering a frequency range of 1.8 to 2.2 GHz,
the PE46120 integrates a 90-degree hybrid splitter, phase shifters, digital step attenuator and a digital
serial interface on a single die. Ideal for optimizing dual-path dynamically load-modulated amplifier
architectures such as Doherty power amplifiers, the monolithic RF controller offers high linearity,
high isolation, high power handling and maximum
…
NI (formerly AWR Corporation) announces that a new 2015 edition
of the eBook,
RF Electronics: Design and Simulation, is now available free of charge
to students, graduates, professors and industry professionals through its
Professors
in Partnership web portal. The Professors in Partnership program is designed to provide engineering
students, faculty and graduates with access to ongoing microwave and RF educational content that enhances
and promotes the use of NI AWR software solutions through e-books, textbooks, and
…
Mouser Electronics is teaming up with celebrity engineer
Grant Imahara and a group of visionaries in the home and factory automation industry,
including Insteon, AiroCorp, TE Connectivity, and Factory Automation Systems, to announce an exciting
new Home and Factory Automation Series. The new Home and Factory Automation series is part of the Empowering
Innovation Together™ program and is available only on Mouser.com. It focuses on innovative automation
technologies that were once only seen in science fiction movies or TV shows like The Jetsons. It highlights
some of the companies that are making these technologies a reality. Filmed on location inside the Insteon
smart …
Electro-Photonics LLC announces the availability of a connectorized
hybrid coupler: Q3XG-1500R-SMA. Our new Q3XG-1500R-SMA
90° hybrid
coupler operates from 1000-2000 MHz, dissipates 65 W, and offers excellent coupling flatness
and isolation for the most critical applications. This coupler has an extremely small package of 1.60
x 1.10 inches (40.64 mm x 27.94 mm). The Q3XG-1500R-SMA is manufactured in the USA, and is RoHS compliant
...
NI (formerly AWR Corporation) announces the agenda has been set and registration
opened for its annual combined AWR Design Forum (ADF) 2015 /
German User Group
meeting being held November 26, 2015 at the NI European Headquarters in Munich. Celebrating its fifth
year, ADF is an open forum that brings together NI AWR software customers, partners and microwave/RF
engineering professionals to learn, network and collaborate on the design of today's microwave and RF
circuits and systems. Highlights of ADF include technical presentations featuring NI AWR Design Environment™
and select customer and keynote ...
Bird Technologies, a leading provider of RF components, subsystems,
test equipment, and services, today introduced the
614 Series digital signal boosters designed to increase the signal strength of land-mobile
and public safety communications systems operating at either 450 to 470 MHz or 470 MHz to 488 MHz. The
highly configurable system combines the benefits of programmable digital RF filters, the cryptographic
and other security benefits of the SNMPv3 control protocol, browser-based configuration and management,
the ability to view changes to filter characteristics while viewing their
...
Saelig Company has announced the availability of
Rigol DSG800 RF Signal Generators,
with output frequencies from 9 kHz to 3.0 GHz. They provide an economical RF signal source
with a maximum output of +20 dBm and frequency resolution of 0.01 Hz at any frequency. Featuring
very low SSB noise of -115 dBc/Hz, they feature a highly stable internal clock (<2ppm standard,
5ppb optional) for creating high performance RF test signals. Operation is easy and intuitive, guided
by the 3.5" color LCD with its logically grouped controls
...
CST and Davide Tallini offer this free seminar on Thursday, December
3, 2015 at 11:00 am EST. "Starting from the
free-space radiation performance of each antenna, the problem to predict the global
installed radiation pattern, antenna to antenna coupling in presence of a spacecraft has to be treated
in order to identify potential blind areas or interferences caused by the neighboring structures. The
prediction of electromagnetic field scattered in complex environment is usually a hard task since the
solution cannot be generally expressed in a simple and/or closed analytical form
...
Ian Poole, of the Radio-Electronics website, has produced an excellent video tutorial on the subject
of envelope
tracking usage in modern radios (aka cellphones). A combination of clear diagrams, interviews with
design engineers, and live screen shots of signal behavior is used to effectively illustrate the principles
without going into gory mathematical detail. If you have ever wondered why cellphone power amplifier
(PA) companies like Qorvo (RFMD), Skyworks, and Peregrine also make and sell DC-DC converter and DC
power management ICs, this video will answer the question
...
everything RF has introduced a new technology hub for the
SATCOM Sector. This is a single
page on the site which summarizes all activity that takes place in this industry. News, White Papers,
New Products and more. Two new categories for the SATCOM Industry have been added to everything RF -
Block Up Converters
(BUC) and Low Noise
Blocks (LNBs). Products from the leading manufacturers in each of these categories have been listed
and users can find products here based on specification - Frequency
...
Rohde & Schwarz has successfully closed fiscal year 2014/2015.
Order income was 6.1 percent higher than in the previous year, with revenue up 4.1 percent. With its
advanced technologies and trailblazing products, the electronics group was able to maintain its leading
market position. Business development focused on test and measurement and secure communications. In
addition, the group substantially expanded its cybersecurity activities.
Pasternack Enterprises has just released their newest engineering
resource called the Cable Assembly Designer which allows the user to design and customize RF cable assemblies
with an easy-to-use online web application at Pasternack.com. Pasternack's new custom cable designer
enables engineers and buyers to create customized RF cable assemblies that meet their specifications
from any combination of compatible connectors and cables offered by the company. Over 250,000 possible
combinations …
MECA
Electronics announces our expedited online service center, the source for
RF Parts on Demand (RFPOD) when you need
them. RFPOD offers an expedited online service that process your order and has it available for pick
up at will call or shipment within 2 hours from order placement to pick up time! Will Call pick up hours
are 9:00 AM to 5 PM (ET) - earlier hours are available by calling customer service in advance at (973)
625-0661. Let us help solve your component problem, we are here when you need us, orders are accepted
24 hours a day, 7 days a week and shipments are made same or next business day
…
The new phase noise analyzer and VCO tester from Rohde &
Schwarz enables ultrasensitive and ultra-fast phase noise measurements. The R&S FSWP also allows
users to very easily measure pulsed sources and residual phase noise of RF components. Plus the instrument
can be upgraded to a signal and spectrum analyzer. With the new
R&S FSWP phase noise tester, users can measure the spectral purity
of signal sources such as generators, synthesizers and VCOs more quickly than with any
…
NuWaves Engineering, an international RF and microwave solutions
provider, announced today that the company has been awarded a Phase II Small Business Innovation Research
(SBIR) contract from the National Aeronautics and Space Administration (NASA) to develop and prototype
a
miniature linear and high-efficiency C-band power amplifier to provide
communication range extension for a variety of NASA missions and applications, including Unmanned Aircraft
Systems (UAS) integration into the National Airspace System (NAS). Under the terms of the contract,
NuWaves will, …
Copper Mountain Technologies (CMT) introduced a new series of
high-performance vector network analyzers (VNAs) designed to efficiently handle advanced test applications
at the 2015 International Microwave Symposium (IMS) in Phoenix on May 17-22. The Cobalt series, which
presently features the C1220 and C1209 models, offers an unmatched price-performance combination for
S-parameter measurement between 100 kHz and 20 GHz. To achieve high performance and an affordable cost,
the design and production of Cobalt VNAs incorporates several
…
Sivers IMA, a leading manufacturer of millimeter wave products and Boston-based
East Coast Microwave (ECM),
today announced that they have signed a reseller and distributor agreement for the US and Canadian markets.
ECM will represent the whole Sivers IMA product range including Converters and Customized Transceivers,
Radar Sensors and Signal Sources such as VCOs and synthesizers. "The agreement with ECM is an important
part of our expansion strategy. The North American market naturally holds a large potential for our
products and we strongly believe that ECM is the right local partner for us to meet the interest we
see", says Robert Ekström CEO of
…
everythingRF will
be covering the
IMS 2015 in Phoenix, Arizona. A link to the live coverage can be found
here. This is a non-bias coverage unlike most of the other journals
where they only publish what their sponsors are showcasing.
This page will be updated as and when new products and announcements
are made at the event. Visit www.everythingRF.com
to learn more …
NI (formerly AWR Corporation), announces that
NI AWR Design Environment™
V12 - the first major software release in 2015 - is now available as a pre-release to select customers,
partners and evaluators. Previewing for the first time at International Microwave Symposium 2015
(IMS2015) in NI booth #2431, this latest release boasts new load-pull
and antenna- and radar-specific features, as well as ease-of-use improvements, speed enhancements and
third-party integration flows.
United States Patent 9,007,125 B2, recently awarded to Empower
RF Systems, validates the uniqueness of the hardware architecture in use on Empower's high power,
next generation amplifiers. The ability to deliver 1 kW CW broadband
power in an air cooled, 5U chassis requires innovation and engineering breakthroughs that are described
and protected in this patent award. "We are pleased to receive this recognition and patent protection
for our next generation amplifiers," said Jon Jacocks, CEO. "The hard work and creativity of our design
teams, leveraging this architecture for standard products and customer configurations, continues to
…"
Anatech Electronics offers the industry's largest portfolio of
high-performance standard and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to 40 GHz. Anatech has released
three new designs: a 2 to 18 GHz connectorized directional coupler, a 2027-2108 MHz &
2452-2484 MHz connectorized band combiner filter, and a 80-225 MHz connectorized circulator.
All can be ordered directly through their AMCrf web store.
New on the market from Narda Safety Test Solutions is the
AMB-8059,
a wideband Area Monitor that monitors electromagnetic fields up to 7 GHz in conformance with the
ITU-T Recommendation K.83. The data can be accessed via Ethernet or GSM/UMTS. The "EMF Observatory"
software integrates several Area Monitors into a wide area coverage monitoring system. The new type
AMB-8059 Area Monitors monitor electromagnetic fields in accordance with the ITU-T
Recommendation K.83: Monitoring of electromagnetic field levels. Depending on the probes used, they
capture electric field strengths in the frequency range 100 kHz to
…
NuWaves Engineering, an international RF and microwave solutions
provider, today announced a new linear bidirectional amplifier for OFDM radios at the Association for
Unmanned Vehicle Systems International Unmanned Systems 2015 Trade Show. The
NuPower Xtender™ 12E06A model is a broadband, small, lightweight and cost-effective
solution for high-performance S-band OFDM transceivers with Mobile Ad hoc Networking
(MANET) and/or Multiple-Input and Multiple-Output
(MIMO) technology
…
Horizon House Publications and Microwave Journal announce
that their annual RF/microwave, EMC/EMI and high-speed digital Electronic Design Conference and exhibition,
EDI CON, is expanding into the U.S. market after three successful events in Beijing, China. EDI CON
China drew more than 2,600 attendees at the April 2015 event held at the China National Convention Center
(CNCC). Thefirstfirst EDI CON USAEDI
CON USA will take place September 20-22, 2016 at the Hynes Convention Center in Boston, Mass. Boston
has an extensive electronic design industry especially in the RF/microwave area where many industry
leading companies reside in the New England region. Horizon House president
…
NI Microwave Component's popular
QuickSyn
Lite frequency synthesizers are now extended to millimeter wave. The new synthesizer modules employ
the same revolutionary phase refining technology that all QuickSyn products use to enable fast switching
speed, low phase noise, compact size, and low cost. The modules are available in three popular bands
- 27 to 40 GHz, 50 to 67 GHz, and 76 to 82 GHz - and are designed to supply medium power output. These
new products present a very cost effective solution
…
Sivers IMA, a leading manufacturer of millimeter wave products,
today announced its launch of a
Radar Development Kit (RDK) an easy-to-use platform for those who need to measure
distance or speed of an object. "At Sivers IMA we have a long experience of developing complete
radar sensor solutions
and a portfolio of FMCW Radar sensor front-ends. For the RDK that we are now launching, we have taken
some of our know-how and developed and packaged hardware and software to simplify for customers that
are interested in including radar technology in their products
…
Skyworks introduces a
step-down,
DC-DC converter for automotive, distributed power, industrial, and medical applications. The 28
V, 3 A, non-synchronous SKY87608-11-577LF is also applicable for general purpose, point-of-load, 16
V, 20 V, and 28 V voltage regulators. The converter offers prime thermal performance and space savings
in addition to addressing the green-power initiative in the non-portable markets. The competitively
priced high-performance solution comes in a SOP-8L, EP, 5 x 6 x 1.55
…
Rohde & Schwarz now offers three new options for its
R&S SMW200A
high end vector signal generator with microwave frequency ranges from 100 kHz to 12.75 GHz,
100 kHz to 31.8 GHz and 100 kHz to 40 GHz. An option covering the range between 100 kHz and 20 GHz has
been available since the summer of 2014. The R&S SMW200A is the only microwave signal generator
on the market to combine a baseband generator and RF generator with fading, AWGN and MIMO capabilities
in a single box. As a result, it supports numerous challenging aerospace and defense and wireless communications
applications …
KR Electronics part number
3230 is a 10
MHz bi-direction absorptive notch filter. The filter maintains excellent forward and reverse return
loss even throughout the notch frequency. The filter has a typical 3 dB bandwidth of 1.66 MHz and 60
dB bandwidth of 577 kHz. The filter is supplied with SMA connectors. Other frequencies and bandwidths
are available.
As with most other types of commercial electronics products,
Ham radio equipment is sold by many distributors at prices discounted below MSRP
(manufacturer's suggested retail price). Manufacturers usually have sales
agreements with distributors that they (the manufacturers) will not offer
lower prices for current products in order to not compete with their distributors. When shopping for
deals, be sure to consider return policies and shipping costs (inc'l for returns).
Amazon, while sometimes not the lowest posted price, is very good
in customer service and free shipping, often making them my choice; I buy almost everything online through
them. If you plan to buy via Amazon, please start your shopping with a link from RF Cafe since I make
a few ¢ commission on the sale and it doesn't cost you extra. Thanks.
Eagle Comtronics Model
NF-1110-TUNABLE passes the entire satellite block band from DC to 2500 MHz.
The tunable notch filter is preset to a center frequency of 1110 MHz and tunable ±40 MHz
with a passband loss less than 1.0 dB (0.5dB typical). Factory set
notch depth is 15 dB with a 3 dB bandwidth of 3 MHz. Power capability is 1 A at
20 VDC. Connectors are 75 ohm type "F" female/female and the unit measures 8.5" X 1.75" X
2.5" approx. Unit is designed for indoors use. 30 dB and 40 dB models also available. For
different frequencies, connectors and
…
Anatech Electronics offers the industry's largest portfolio of
high-performance standard and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to 40 GHz. Anatech has released
three new filter designs: a 90-1100 MHz connectorized highpass filter, a 100-1250 MHz surface
mount LC lowpass filter, and a 2574 MHz connectorized highpass filter. All can be ordered directly
through their AMCrf web store.
NI
(formerly AWR Corporation) announces the immediate availability of the
11.03/.04 release of NI AWR Design Environment™ high-frequency software, inclusive of Microwave Office,
Analog Office, Visual System Simulator™ (VSS), Analyst™ and AXIEM for
the design of MMICs, RF PCBs, RFICs, microwave modules, communication systems, radar systems, antennas
and more. More than 100 improvements, enhancements and user interface changes are contained within this
release …
Pasternack, a leading manufacturer and supplier of
RF, microwave and millimeter wave products, debuts their new broadband,
high power coaxial limiters which help protect sensitive low power RF receivers and other microwave
circuits in close proximity to high power signals. Common applications for these
RF limiters
include electronic warfare, instrumentation, fiber optic communication systems, military communications,
radar, SATCOM, point-to-point radio, telecom, data links and R&D. Pasternack's latest release of
high power limiters consists
…
Rohde & Schwarz is expanding the analysis bandwidth of its
R&S FSW high end signal and spectrum analyzer to 2 GHz by introducing
the new R&S FSW-B2000 hardware option. This test solution enables R&D users to demodulate extremely
wideband signals and analyze them in detail. There is no other instrument on the market that combines
such a large analysis bandwidth with a frequency range up to 67 GHz, and it opens up numerous applications.
For example, users can measure the EVM values of communications signals or the chirp rate on chirped
radar systems
…
Werbel Microwave expands its series of 2-18 GHz coverage
with the new, model 4PA1000
four-way SMA splitter.
Can be optimized using our trade techniques to meet strict amplitude and phase balance per customer
requirements. High isolation, typically 22 dB or more between all branches. Great for lab test
setups, made in USA.
RFMW announces design and sales support for the Iso-Attenuator
model RFSL2308-A30 from
RF Circulator Isolator (RFCI). RFCI Iso-Attenuators combine protection for active components from
distortion or potentially damaging reflected power with a convenient, attenuated port for monitoring
RF power or providing a feedback loop. The RFSL2308-A30 is capable of handling 1000 W peak / 200 W
average forward power and 100 W CW reverse power into the on-board, 30 dB attenuator. Spanning
2200 to 2400 MHz, the RFCI RFSL2308-A30 provides >25 dB typical port-to-port isolation
…
NI (formerly AWR Corporation) released
a new NI AWR Design Environment application note, "Improving the Second-harmonic Pass Band Rejection of Microstrip Side-coupled
Filters." Because of their low cost and easy manufacturability, side-coupled filters constructed
from printed-circuit board-based microstrip are widely used throughout the industry. One of the main
drawbacks of the side-coupled filter is its limited rejection of the second harmonic. This application
note demonstrates a solution that mitigates this problem through the introduction of notch-filter elements
that improve the overall rejection of side-coupled filters at the second harmonic without significantly
affecting the filter passband behavior
…
Quantenna Communications,
the leader in ultra-high performance Wi-Fi, today announced the availability of the industry's first
10G Wave 3 Wi-Fi product family. The products are built on Quantenna's True 8x8™ QSR10G Wi-Fi platform
with multi-user MIMO (MU-MIMO) technology for home wireless access points
and residential gateways. Quantenna's up-to-12-streams 10G Wave 3 product family delivers unprecedented
Wi-Fi performance, reliability and capacity for high-density environments, and can address both the
service provider and retail market segments. 10G Wave 3 is a revolutionary new way for Wi-Fi networks
to operate ...
M/A-COM Technology Solutions, a leading supplier of high performance
analog RF, microwave, and optical semiconductor products, today announced the new
MAGX-100027-100C0P, a wideband transistor optimized for DC-2.7 GHz operation and
built using proprietary 4th generation GaN on Silicon (GaN on Si) process is sampling today. This GaN
on Si HEMT D-Mode transistor is ideally suited for defense communications, land mobile radio
...
The
TTRM1076 is a high linearity bi-directional SSPA suitable for use with any modulation
and signal type. It is currently utilized in UAV data links and long range point-point COFDM video links.
High speed T/R switching and sequencing of the PA, LNA, and switch driver circuitry is performed by
an on-board CPLD, where switching timing can be adjusted in firmware based on system requirements. The
transmit section produces over 25 Watts of BPSK power, and over 6 Watts of 64 QAM. The unit also features
a three color status LED on the front panel that shows if the SSPA is in transmit or receive mode
...
Guerrilla RF, a leading provider of high performance MMICs, today
introduces a new addition to the company's family of high linearity gain blocks featuring a unique combination
of simple-application schematic, flat gain and high compressed output power which operate from near
DC up to 4 GHz. The GRF2012 and GRF2013 are ideal as cost-effective pre-drivers for today's state-of-the-art
broadband GaN high power amplifiers as well as a multitude of general purpose, high-performance gain
block applications. Their flat gain and flexible biasing allow for high levels of re-use both within
a single design and across platforms
...
"Qualcomm says that its forthcoming chips will include a real
time, on device machine learning designed to support detection of zero day malware threats. Snapdragon
Smart Protect is also the first application to utilize
Qualcomm
Zeroth technology, augmenting conventional anti-malware solutions by supporting on device real-time
malware detection, classification and cause analysis using an advanced cognitive computing behavioral
engine. Snapdragon Smart Protect complements existing
..."
Broadband Impedance Matching Networks are always difficult and
time consuming to design. This webcast discusses how to deal with matching frequency-dependent complex
source or load impedances to unstable, non-unilateral devices as well as designing non-50 ohm inter-stage
matching between devices. Unlike traditional discussion on impedance matching using smith charts and
complex math, you'll learn practical methods of quickly synthesizing and realizing lumped or distributed
matching networks for difficult broadband applications
...
Z-Communications, Inc., a worldwide leader in the design and manufacturing
of RF and microwave components, is pleased to introduce a new series of
RF amplifier
products with the release of the PAC18700T and DRC23000M. Operating in the K-band, the PAC18700T and
DRC23000M provide a unique advantage by allowing quick and simple installation into systems with their
integrated supply circuitry allowing to be operated from a single power source and availability in a
SMA connectorized module package. These remarkable new RF amplifiers are further heightened by their
high output power, high gain, and superior linearity
...
"Keysight Technologies continues to build its test equipment support
services business and it has bought a UK-based repair and asset management services company. The test
services business is new focus for Keysight following last year's separation from Agilent Technologies
life sciences businesses. Electroservices Enterprises, which is based in Telford
..."
MECA is pleased to announce its latest addition to our broad band
line of Power
Dividers with the type N model (80X-4-3.250WWP). Available in; 2, 4, 8 & 16-Way, 30W Wilkinson
Power Dividers, optimized for excellent performance with industry leading specifications from 500 MHz
– 6.00 GHz IP67 rated and suited for indoor and outdoor applications. Offering typical VSWR's ranging
from 1.20:1 to 1.30:1, Isolation of 17-20dB minimum while offering phase and amplitude balance typically
only seen in narrower/octave band models
...
Planar Monolithics Industries, Inc. invites you to visit them
at Stand 107 of the European Microwave
2015 show in Paris, France, from September 6-11. PMI offers just about any RF/Microwave component,
module, or sub-system for both industrial and military based requirements. Components and modules can
be modified to meet your exact requirement
...
New MFJ-226 introduces the MFJ Times Technology series of advanced
Antenna Analyzers! This groundbreaking VNA antenna analyzer -- MFJ-226
Antenna Expert -- delivers OSL calibration and true reactance including its sign from 1 MHz to 230 MHz
with 1-Hz frequency resolution! Incredibly Powerful MFJ-226 is the first and only low-cost handheld
VNA to feature OSL (open/short/load) calibration for super accuracy and
sign of reactance to positively identify inductive or capacitive reactance. These two features, normally
only found on lab instruments, place incredible diagnostic power in
...
P1dB, Inc., a supplier of RF and microwave components, launched
its new e-commerce website, www.p1db.com,
whose focus is product availability and fast shipment to its global customer base. "P1dB is committed
to providing its customers with RF and Microwave products on a timely basis" says Gerry Camacho, P1dB
GM and COO. "Our updated website is the first step to meeting our commitment of offering RF and Microwave
components to the industry from stock or very short delivery." The P1dB Website has been designed to
meet customer demands for an easy product search and consumer level e-commerce check-out and 24/7 availability
...
Anatech Electronics offers the industry's largest portfolio of
high-performance standard and customized RF and microwave filters and filter-related products for military,
commercial, aerospace and defense, and industrial applications up to 40 GHz. Anatech has released
three new designs: a surface mount 455 kHz
crystal bandpass filter,
a connectorized 1800 MHz cavity bandpass filter, and a surface mount 1650 MHz ceramic bandpass
filter. All can be ordered directly through their AMCrf web store
...
The FEKO Student Competition is an international contest organized
annually by the FEKO team in support of engineering education. Open to students of colleges and universities
from every country in the world who are aged 18 years and older at the time of entry, except for students
in countries or at universities subject to a ban on receiving U.S. technology exports. Submission should
highlight the problem solved with FEKO, including details on simulation setup, solution method used,
results and result interpretation. The Competition will begin on April 1, 2015.
Deadline for submissions is September 30, 2015. Entrants must use
and complete the
online registration form.
everything RF has recently updated its Directory for Waveguide Products & Manufacturers.
There are over 20 waveguide component categories listed on everything RF. Users can search for products
across multiple manufacturers using parametric search tools to narrow down on products based on waveguide
size and other parameters based on the selected category. everything RF is working closely with a number
of manufacturers to get all their product data listed on the site. It is a free service, so we encourage
manufacturers to contact us to get
...
NI (formerly AWR Corporation) announces that the agenda
has been set and registration opened for the AWR Design Forum 2015 (ADF) in Hsinchu, Taiwan on Tuesday, Sept. 22. Highlights
of ADF 2015 Taiwan include the following technical presentations featuring NI AWR Design Environment
software as well as customer design successes: Overview of NI AWR Design Environment V12, Module and
Connector Design, Using Microwave Office and Analyst Software, LTCC Design and Verification with Microwave
Office, Efficient Implementation and Design of
...
Sivers IMA today announces its launch of the next generation
converter for E-band radio links. The new generation converter is based on the company's
proprietary SiGe chip and offers a cost-effective and high-performance solution for those who develop
and market radio links or test and measurement equipment for manufacturing of radio links and devices.
The new converter from Sivers IMAs is designed to support very advanced modulation schemes, which enables
record breaking capacities of up to 10 Gbps
...
The result of a 2014 Kickstarter project, LabNation's
SMARTSCOPE combines 3 high-end instruments into 1 mobile, smart device
which works on both PC, laptop, tablet and smartphone. • 2-channel 45 MHz o-scope channels
at 100MS/s, • 50MS/s arbitrary waveform generator, • 8-channel digital logic analyzer at
100MS/s, • digital waveform generator at 100MS/s. SMARTSCOPE's open framework allows you to hook
up your creation to the extension ports and control it from your PC or smartphone. When you're taking
on more advanced projects, you'll appreciate the full access you have to the powerful FPGA. Current
price is only $229
...
Noise figure is critical for characterizing a receiver and its
ability to detect weak incoming signals in the presence of self-generated noise. Reducing noise figure
begins with a solid understanding of the uncertainties in your components, subsystems, and setup. Quantifying
those unknowns depends on flexible tools that provide accurate, reliable results. Get 10 hints to help
minimize the uncertainties in your noise figure measurements
...
NI (formerly AWR Corporation) announces that it is
sponsoring an RF printed circuit board (PCB) design webinar on October 15, 2015. Part of the
Microwave Journal Technical Webinar Series, this one-hour webinar
offers participants insight on practical RF PCB design to help them meet the needs of today's demanding
wireless product development environment. The webinar is presented by Henry Lau of Lexiwave Technology,
who has over 22 years of experience in designing RF systems, products, and RFICs, and features the use
of NI AWR software products ...
NuWaves Engineering, an international RF and microwave solutions
provider, announced the release of an upgraded broadband RF power amplifier (PA)
for L- and S-band transmitters and data radios, the
NuPower™ 12B01A model, featuring improved power efficiency and operational
temperature performance and a wider supply voltage range. An alternative product configuration, part
number NW-PA-12B01A-D30, is available with reduced gain that accepts a +30 dBm RF input signal from
the transmitter , supporting a common RF output level of industry data links
...
P1dB, an RF and Microwave component supplier, introduces 2-Way
(P1PD-SAF-0206G30W-2) and 4-Way (P1PD-SAF-0206G30W-4) SMA power dividers operating from 2 to 6 GHz. The new
RF power dividers operate across the full frequency band and are optimized for the 2.4 and 5 GHz Wi-Fi
bands with increased isolation and improved insertion loss. The SMA dividers meet the demands of production
test systems for routers, cell phones, tablets and other Wi-Fi enabled products
...
Quick Summary of Topics: – How to Design for Power Integrity –
Power Electronics: HF Power Semiconductor Modeling – How to Design Broadband Impedance Matching Networks
– Introducing WaferPro Express 2015 – Wafer-Level Measurement Solution With Cascade Microtech – New
5G Channel Sounding Reference Solution – Passive Filter Synthesis Design Video – New Microwave Circuit
Design Textbook – 2015 Aerospace and Defense Symposium DVD – Webcasts – Follow Us on Social Media
...
Pasternack, a leading manufacturer and supplier of RF, microwave
and millimeter wave products, introduces a new line of coaxial
threshold detectors designed for microwave and millimeter wave applications
from 2 to 40 GHz. These threshold detectors are commonly used for analyzing radar performance, leveling
pulsed signal sources, AM noise measurements, system monitoring and pulsed RF measurements in ultra-broadband
applications. Pasternack's latest release of threshold detectors consists of 3 unique models covering
broadband frequency bands from 2 to 40 GHz. Designs incorporate gain stages for higher dynamic range
...
Keysight Technologies today introduced the 81607A, 81608A and
81609A tunable laser sources, a range of modules for the
Keysight 8164B lightwave
measurement system. The new modules extend the product family that debuted in March 2015 with the
Keysight 81606A tunable laser source, an instrument with unmatched sub-picometer tuning repeatability
and best-in-class wavelength accuracy that is maintained even in full-speed, two-way sweeps. The new
value and basic line models share the 81606A's new design with low spontaneous emission and narrow line
width, its industry-leading power repeatability and long-term stability. The new
...
"Qorvo, a leading provider of RF solutions for mobile, infrastructure
and aerospace / defense applications, today announced a new highly cost effective, high performance
Ka-band 3 watt
GaN power amplifier for commercial VSAT satellite ground terminals
transmitting high speed internet data. "Qorvo's 0.15um high-frequency GaN process delivers three times
the power density of past generation GaAs pHEMT solutions
..."
Sivers IMA today announced that SAF Tehnika, a designer, producer
and distributor of digital microwave data transmission technology has chosen
Sivers IMA's E-band converters as an integrated part in their coming products. "This
is an important win for us. As a supplier of components our success is based on the fact that radio
link manufacturers choose our converters to build into their products. We have had a good dialogue with
SAF Tehnika during our development process and we are now at a stage where they are ready to order a
customized module to integrate in their end product. Being chosen by
...
Optenni Ltd and Anritsu Corporation announce a
real-time link between the Anritsu ShockLine family of Vector Network Analyzers
and the Optenni Lab matching circuit optimization software. The link enables an entirely novel workflow
for the antenna designer, streaming the measured impedance data from the VNA continuously to the matching
circuit synthesis of Optenni Lab. This novel workflow opens up new horizons for the design process,
as the effect of physical modifications and tuning of an antenna prototype can immediately be seen in
the simulated total performance of the antenna
...
NI (formerly AWR Corporation) announces
that it is sponsoring the upcoming Microwave Journal RF/Microwave Training Radar Webinar scheduled for
October 1, 2015. This "Introduction to Radar" webinar covers the basic principles of radar detection and
ranging, pulse versus continuous wave systems, radar modulation, radar path budget and radar range equation,
range ambiguity and mitigation, maximum and minimum detectable range, and plan position indicator
(PPI) and A-scope displays
...
Validate your complex multi-antenna designs with Keysight's new
release of the
M9391A PXIe vector signal analyzer and
M9381A PXIe vector signal generator. With precise channel-to-channel
synchronization and phase coherence and proven measurement software, you can design and validate the
multi-antenna techniques being deployed in LTE-Advanced, WLAN and 5G, including up to 8x8 MIMO, beamforming
and carrier aggregation. Keysight Technologies Program Manager Sheri DeTomasi
...
Programs provide students with tools to become industry-ready
engineers. Your measurement challenges are increasingly complex and the technologies you work with are
changing rapidly. The
2015 Back to Basics DVD includes more than 50 new application notes as
well as webcasts and videos that cover a wide variety of modern measurement topics from design simulation
to digital and modular instrumentation
...
Saelig Company, Inc. announces the
STE3000FAV2 patented RF Test Enclosure, designed to give forensics
technicians a highly isolated bench-top environment to perform electronic device interrogations of electronic
equipment. The device is therefore protected from remote kill, lock, or self-destruct commands, as well
as being protected from GPS and location tracking. Attached to the STE3000FAV2 enclosure is a high quality
video and audio recorder for downloading evidentiary stored data. When the electronic device
(cellphone, laptop PC, etc.) is placed inside this enclosure, it can be
viewed through the LED-illuminated RF-proof window and accessed via silver-mesh RF-tight gloves. Whether
opening a device ...
With its
R&S ZVA high end vector network analyzers and
R&S ZVAX-TRM extension unit, Rohde & Schwarz offers an efficient
and highly flexible solution for characterizing active components. Using a combination of a high-end
R&S ZVA and the R&S ZVAX-TRM, users can now measure the noise figures of amplifiers, converters
and transmit/receive (T/R) modules for radar and satellite applications. The new R&S ZVAXxxB31 and
R&S ZVAXxxB32 options for the R&S ZVAX-TRM even make it possible to carry out this measurement
on amplifiers ...
|