EMCView simplifies the process of EMC pre-compliance
testing of radiated and conducted emissions with numerous pre-configured project files for
CISPR-xx (EN550xx) emission measurements
 Fairport, NY, USA: Saelig Company, Inc., (Saelig) (www.saelig.com) announces the availability
of the TekBox EMCView Pre-compliance Testing Software. This PC-compatible software
simplifies the process of EMC pre-compliance testing of radiated and conducted emissions.
EMCView complements an emissions test setup of a spectrum analyzer, an LISN (Line Impedance
Stabilization Networks) and an EMI-quiet TEM (Transverse ElectroMagnetic) Cell. Built-in amplitude
correction provides the correction and conversion coefficients for cables, amplifiers, attenuators,
LISNs, TEM cells, antennas, RF current probes, striplines and capacitive coupling clamps.
Without any time-consuming setup, the software is ready for measurements immediately after
installation on a PC. All emission-related CISPR-xx (EN550xx) measurements, as well as some
automotive manufacturer standards, are pre-configured in corresponding project files. The
resulting graph supports two complete measurement runs, such as Average / Quasi-Peak or Peak
/ Quasi Peak or alternatively a fast Quasi-Peak scan of critical peaks.
FEATURES numerous pre-configured project files for CISPR-xx (EN550xx) emission measurements
graph supports two complete measurement runs, same as in a test house fast Quasi-Peak scan
of critical peaks, immune to frequency drift of the selected peaks configurable limit lines
and segment files configurable correction files for cable, LISN, amplifier, antenna etc. configurable
margins for the identification and selection of critical peaks supports import and overlaying
of reference measurements for comparison purpose linear or logarithmic frequency axis automatic
creation of test reports many import/export-functions
EMCview software currently supports spectrum analyzers from Rigol and Siglent, but support
for other manufacturers will be added in future software versions. The analyzers should preferably
be equipped with the manufacturer's "EMI option", although it is not essential; if it is not
installed, the analyzer will change the preconfigured resolution bandwidths of 200 Hz,
9 kHz or 120 kHz (as specified in the EMC standards) to 300 Hz, 10 kHz
or 100 kHz.
With EMCView Pre-compliance Testing Software, in-house measurements of EMC behavior during
product design phase, EMC educational training and pre-compliance product testing are all
made easier.
Created by EMI experts TekBox,it is available now from their authorized North American
distributor Saelig Company, Inc. Fairport, NY. For detailed specifications, free technical
assistance, or additional information, please contact (toll-free in the US) 1-888-7SAELIG,
via email: info@saelig.com,
or visit www.saelig.com
About Saelig Company, Inc.
Founded in 1988 in Rochester, New York, Saelig is a North American distributor with a growing
reputation for finding and sourcing unique, easy-to-use control and instrumentation products
and related active components, for use in a variety of industries. Products lines are continuously
added from sources across the globe, and are offered at highly competitive prices, accompanied
by full in-house technical support, exceptional customer service, and fast delivery. For full
details of available product lines, please visit
www.saelig.com.
Contact Info
Alan Lowne President Saelig Company, Inc. 71 Perinton Parkway Fairport, NY
14450 USA Toll-Free: (888) 7-SAELIG
(888) 772-3544 Tel: (585) 385-1750 Email:
info@saelig.com
Web: www.saelig.com
Posted October 23, 2017
|
