The Latest Products and News from Triad RF Systems
East Brunswick, NJ (January 13, 2017) –
High Power Multi-In Multi-Out (MIMO) System Delivers 100W for Long Range Applications
 Triad RF has developed a high power system that extends the distance
a typical Mobile Network MMIO (MN-MIMO) operates over. Utilizing Triad's high power bi-directional amplifiers
(BDAs), the Transmit RF output power of the four (4) channel MIMO radio is increased by 25 dB. The receive
link is increased by 10 dB to overcome any losses in system connections. The unit can operate over specific
frequency bands from 400 MHz to 6 GHz. Features include an on-board computer to monitor all system diagnostics,
Ethernet/SNMP interface capabilities for remote monitoring / communicating, fiber optic I/O, front panel
Ethernet connection, circuit breaker protection on each channel, and cooling fans. Input power capability
covers both 110 and 220 VAC. The system went through and passed the following environmental tests methods:
MIL-STD-810 MIL-STD-461 MIL-STD-901 MIL-STD-167 The unit is presently in production with frequency,
power and interface variations in development. Call sales at 855-558-1001 x1 for details and specifics.
Amplifier System for Cube and Nano Satellites
 The TTRR1086 is a dual bi-directional rack mount system designed
for CubeSat GCS (Ground Station) applications. It contains two redundant transmit/receive chains that
operate from 400-450 MHz with a transmit power of 170W per channel. It can be used with a multitude
of waveforms, from GMSK/BPSK up to highly modulated signals such as 64QAM and 256QAM for higher data
rate applications. Rx gain is 22dB and noise figure is approximately 1.3 dB across the band. The system
features forward and reflected power monitoring, high speed Tx/Rx switching, temperature monitoring,
and amplifier status monitoring. It is also available with Ethernet / SNMP interfaces for remote control
and monitoring. It is contained in a 3U rack mount chassis and is designed for long term reliability.
Call sales at 855-558-1001 x1 for details and specifics.
700-6000 MHz 20W SSPA
 The
TA1164 is a broadband GaN SSPA, designed for general-purpose RF test and military
jamming applications. Internal DC conversion allows for a +12 to + 36 VDC supply voltage. CW output
power is 10W min, 20W typical across the band. Small signal gain is 33 dB typical. The module measures
4.9 x 4.7 x 2.08 inches. RF connectors are SMA Female, and the DC Connector is a 7W2 Male.
Meet us at the International Wireless Communications Expo: March 27th-31st 2017, Las Vegas Convention
Center, NV
See us at Xponential 2017: May 8th-11th 20176, Kay Bailey Hutchinson Convention Center, Dallas, TX
Join our LinkedIN Group - UAV Data Links
 The
UAV Data Links group focuses
on the engineering community involved in the systems design and integration of telemetry, video, and
data links for unmanned air, ground and sea vehicles. The discussions include RF Power, Antenna Gain/Pattern,
Receiver Sensitivity, Path Loss, RF Interference with GPS and other systems, Bi-Directional Amplifiers,
Radio Manufacturers, RF Modulation, and Ground Station Tracking.
Triad RF News
Leading MIMO Radio Manufacturer Orders with Triad RF Systems
A leading radio manufacturer specializing in world-class MIMO radios has placed another order with
Triad RF for the TTRM1078Q. The TTRM1078Q is a
Quad-channel Bi-Directional amplifier capable of an output power of 25 Watts per
channel and supports any signal type and modulation format.
Triad RF Ships Amplifier Systems to Leading UAV Manufacturer in Israel
Triad RF Systems has fulfilled an order placed by a leading Israeli UAV manufacturer which specializes
in
L-band and S-band HD video, telemetry, and command and control data links.
Triad RF Provides NASA with High-Power Amplifier for Data Link
Triad RF Systems has shipped the TTRM1054-D01 to NASA to fulfill their power and data rate needs.
The TTRM1054-D01 features proprietary
auto-switching
circuitry.
About Triad RF System
Triad RF Systems, founded in 2010, designs and manufactures high-performance, high-power RF and microwave
amplifiers operating at frequencies from 10 MHz to 20 GHz. The company focuses on delivering extremely
high reliability and ruggedness when integrating its products within the confines of subsystems and
systems - without sacrificing efficiency or linearity and adhering to stringent requirements for size,
weight, and power. The company's products are employed in commercial and military applications, including
terrestrial wireless and satellite communications, radar, electronic warfare, medical, digital video
broadcast, and avionics systems.
Contact Info:
Triad RF Systems Chris DeAngelis 11 Harts Lane, Suite I East Brunswick, NJ 08816
Email: sales@triadrf.com
Phone: 1-855-558-1001
Copyright © 2017 Triad RF Systems, All rights reserved.
Posted January 16, 2017
|
