TTRM1123 High Power Bi-Directional Amplifier (BDA)
December 12, 2018: Triad RF Systems, a top-tier
designer and manufacturer of RF and microwave amplifiers, announces the introduction
of their TTRM1123 high power
amplifier (BDA) that utilizes the latest LDMOS technology to provide over 60 W
of linear power in S-Band. The unit is designed to be integrated in any system that requires
high power, high efficiency and high linearity in the entire 2200 - 2500 MHz band.
In transmit mode, the amplifier provides 28 dB of small signal gain and can produce
over 10 W of 64 QAM OFDM power across the band! In receive mode, the unit has 11 dB
of small signal gain with a noise figure of 2 dB. The unit can be configured to auto
switch to transmit when RF is present at the radio port, or manual mode when the radio
controls the switching.
The small unit measures only 5.38 x 4.39 x 1.31 inches and is available with an integral
heatsink. RF connectors are TNC Female and the DC connector is 10 pin Circular Locking.
The amplifier runs off of +28 VDC.
The module will operate from -40°C to +80°C baseplate. The amplifier is designed
and tested to withstand MIL-STD-810 shock and vibration requirements along with humidity
and IP-67 immersion
About Triad RF System
Triad RF Systems, founded in 2010, designs and manufactures high-performance, high-power
RF and microwave amplifiers operating at frequencies from 10 MHz to 20 GHz.
The company focuses on delivering extremely high reliability and ruggedness when integrating
its products within the confines of subsystems and systems - without sacrificing efficiency
or linearity and adhering to stringent requirements for size, weight, and power. The
company's products are employed in commercial and military applications, including terrestrial
wireless and satellite communications, radar, electronic warfare, medical, digital video
broadcast, and avionics systems.
Triad RF Systems
11 Harts Lane, Suite I
Copyright © 2018 Triad RF Systems, All rights reserved.
Posted December 17, 2018