Anatech Electronics, Inc. offers the industry's largest portfolio
of high-performance standard and customized RF and microwave filters and filter-related
products for military, commercial, aerospace and defense, and industrial applications
up to 40 GHz. Anatech has introduced three new filter designs: a surface mount 2050
/ 2250 MHz Ceramic Duplexer, a surface mount 62.5 MHz IF SAW Filter, and a 537-563 MHz
/ 2432-2480 MHz Duplexer with N-type connectors. Custom RF filters designs are used when
a standard cannot be found, or the requirements are such that a custom approach is necessary.
2050 / 2250 MHz Ceramic Duplexer
AM2050-2250D1163
Band 1: 2050 MHz Band 2: 2250 MHz Band 1 Bandwidth: 100 MHz Band 2 Bandwidth:
100 MHz Insertion loss: <1.0 dB
62.5 MHz IF SAW Filter
AM62S803
Center Frequency: 62.5 MHz Band Width: 21.2 MHz Pass Band: 51.9-73.1 MHz
Insertion Loss: 18.0 dB
537-563 MHz / 2432-2480 MHz Duplexer
AE550-2456DB5316
Band 1: 537-563 MHz Band 2: 2432-2480 MHz Band 1 Bandwidth: 26 MHz Band
2 Bandwidth: 48 MHz Insertion loss: <3.0 dB
For more information about these products or to discuss any of your requirements,
please contact us at (973) 772-4242 or send an e-mail to
sales@anatechelectronics.com. Visit our
website at www.anatechelectronics.com
About Anatech Electronics
Anatech Electronics, Inc. (AEI) specializes in the design and manufacture of standard
and custom RF and microwave filters and other passive components and subsystems employed
in commercial, industrial, and aerospace and applications. Products are available from
an operating frequency range of 10 kHz to 30 GHz and include cavity, ceramic, crystal,
LC, and surface acoustic wave (SAW), as well as power combiners/dividers, duplexers and
diplexers, directional couplers, terminations, attenuators, circulators, EMI filters,
and lightning arrestors. The company's custom products and capabilities are available
at www.anatechelectronics.com.
Contact:
Anatech Electronics, Inc. 70 Outwater Lane Garfield, NJ 07026 (973) 772-4242
sales@anatechelectronics.com
Posted December 6, 2018
|