Planar Monolithic Industries (PMI) recently introduced four new products in their
extensive line of RF and microwave components. Included are a 2.0 to 18.0 GHz high
speed single pole six throw reflective switch capable of switching within 15 ns,
a 2.0 to 18.0 GHz 8-bit vector phase shifter, and a 2-channel switch filter bank
with a low-pass 8.62 to 8.70 GHz filter and a 8.0 to 26.5 GHz bandpass filter. Contact
PMI today for more information.
 PMI Model No. P6T-2G18G-55-R-512-SFF
PMI Model No.
P6T-2G18G-55-R-512-SFF is a high speed, single pole, six throw,
reflective switch capable of switching within 15 ns. The frequency range is 2.0
to 18.0 GHz and has over 55 dB of isolation. This model was designed to produce
very low video transients of 15 mV peak to peak and a video transient spectral content
of -65 dBm maximum. Features include TTL control, SMA female connectors, small package
size 1.0" x 1.4" x 0.3".
PMI Model No. PS-2G18G-360-8D
 PMI Model No.
PS-2G18G-360-8D is a 2.0 to 18.0 GHz, 8-Bit, Vector Phase Shifter
making it ideal for frequency translation where continuous monotonic phase shifting
is required. This model also features high speed switching and typically lower than
60 dB harmonic distortion. Specifications include Insertion Loss: 18.0 dB Max; Phase
Shift Range: 360°; Switching Speed: 500 ns Max - Measured 410 ns; Control Slopes:
Linear; Phase Vs Frequency: ±15° Typ. - Measured ±15.39°; RF Input Power: +20 dBm
CW, 1 Watt Max; VSWR: 2.2:1 Max - Measured 1.79:1 (50 Ohm System); Power Supply:
±12 V to ±15 V @ ±100 mA Max, Measured +15V @ 63 mA, Measured -15V @ 76 mA; and
Control Bits: 8-Bit TTL Unit size is 4.25" x 3.50" x 1.00"; RF Connectors: SMA (F);
Control & Power Connector: DC-37P, Sub Miniature D Multi-Pin and Finish: Painted
Blue.
PMI Model No.
 PMI Model No.
2SFB-8G26G-CD-SFF Rev C is a 2-channel switch filter bank providing
a low-pass filter that passes 8.62 to 8.70 GHz with a rejection band of 17.24 to
17.4 GHz. In by-pass mode the unit passes signals from 8.0 to 26.5 GHz. This unit
is powered by a +5 V single supply and the control logic is TTL/CMOS +5 V compatible.
Other specifications include Input RF Power Level (No Damage) +20 dBm CW Max (powered
and unpowered), Input IP3 (pin = -10 dBm, DF = 2 MHz) +27 dBm Max, +32 dBm Typ,
and Switching Speed 100 ns Max - Measured <100 ns. RF Input/Output SMA
(F) removable connectors and package size 1.5" x 0.8" x 0.5".
About Planar Monolithics Industries (PMI)
Planar Monolithics was founded basically to take advantage of the growing demand
in monolithic-based products using the hybrid MIC/MMIC technology innovations that
are mushrooming in a big way all over the world. High performance and reliable products
can be obtained by using this technology. Planar Monolithics will meet these requirements.
Planar Monolithics organization has been setup to design, develop, manufacture,
test, and market complex state-of-the-art hybrid RF/microwave and monolithic integrated
circuits (MIC/MMIC) and components, and hybrid MIC/MMIC supercomponents and subsystems.
Planar Monolithics provides its unique products for applications in space, military,
communications, telecommunications, commercial, and consumer electronics systems.
Contacts:
Barry Newlin Marketing Communications Specialists Planar Monolithics
Industries, Inc. 7311-F Grove Road Frederick, Maryland 21704, USA
CAGE Code: 05XQ0 Phone: (301) 662-5019 Cell: (301) 662-1731 E-Mail:
bnewlin@pmi-inc.com
Website: www.pmi-rf.com
Posted January 29, 2019
|
