Planar Monolithic Industries (PMI) introduces six new products for June in their
extensive line of RF and microwave components. Included are a 1.0 to 2.0 GHz limiter,
a 1.0 to 12.0 GHz threshold detector, a 50 MHz to 4.0 GHz, SP32T absorptive switch,
an 8.0 to 22.0 GHz highpass filter, a 0.5 to 18.0 GHz frequency divider, and an
18.0 to 40.0 GHz bi-phase modulator. Contact PMI today for more information.
 PMI Model No. LM-1G2G-4CW-1KWP-SMF, 1.0 to 2.0
GHz, Limiter
PMI Model No.
LM-1G2G-4CW-1KWP-SMF
is a Limiter that operates over the 1.0 to 2.0 GHz frequency range. Specification
include maximum insertion loss of 0.7 dB; maximum VSWR of 2.0:1; Input Power of
4 W CW Minimum, 1 kW Peak (1% Duty Cycle, 1 µs Max. Pulse Width); Maximum Flat Leakage:
16 dBm (40 mW) Max; Limiting Threshold 5 dBm Min, 1 dB Compression; and Recovery
Time: 1 µs Max. This model contains an SMA male input connector and an SMA female
output connector in a housing measuring 1.00" x 0.75" x 0.38".
 PMI Model No. TD-1G12G-RL-CD-SFF-NH, 1.0 to
12.0 GHz, Threshold Detector
PMI Model No.
TD-1G12G-RL-CD-SFF-NH
is a Threshold Detector that operates over the 1.0 to 12.0 GHz frequency range.
Typical VSWR of 3.0:1; maximum input power of 100 mW CW; dynamic range -30 to +10
dBm; threshold variation (With Frequency) ±1.5 dB maximum; propagation Delay 10
ns typical, 3 dB above threshold setting (50% RF Input to 50% Logic at -10 dBm);
minimum pulse width: 50 ns typical; temperature stability: 1.0 dB typical, 3 dB
above threshold setting; threshold Level Setting Range is -30 to -10 dBm and input
power 100 mW CW maximum. Unit housing measures 1.10" x 0.60" x 0.19" and has SMA
female connectors.
 PMI Model No. P32T-0R5G18G-60-T-SFF-OPT50M4G,
50 MHz to 4.0 GHz, SP32T Absorptive Switch
PMI Model No.
P32T-0R5G18G-60-T-SFF-OPT50M4G is a High-Speed, Single Pole, Thirty-Two Throw,
Absorptive Switch that operates over 50 MHz to 4.0 GHz. This State-Of-The-Art Switch
offers top notch performance of 4.0 dB maximum insertion loss and a minimum isolation
of 60 dB. The switch maintains 2.0:1 maximum VSWR over the full operating frequency
with a maximum switching speed of 200 ns. The operating input power rating is +20
dBm CW maximum and the switch is controlled via 5-Bit Decoded TTL. The required
DC Supply is ±5 VDC and the housing measures 8.0” x 3.5” x 1.0”.
 PMI Model No. HP8G-7D8G-CD-SMF, 8.0 to 22.0
GHz, High Pass Filter
PMI Model No.
HP8G-7D8G-CD-SMF
is a High Pass Filter that operates over the 8.0 to 22.0 GHz frequency range It
has a Typ. CW input power of 5 W: passband Insertion Loss 1.5 dB Max, Rejection
@ 7.5 GHz -35 dB Typ; and a Max passband VSWR of 2.0:1. This model offers SMA male
input connector and a SMA female output connector in a housing measuring 1.15" x
0.70" x 0.50".
 PMI Model No. PSC-200M18G-CD-SFF, 0.5 to 18.0
GHz, Frequency Divider
PMI Model No.
PSC-200M18G-CD-SFF
is a Frequency Divider that operates over the 0.5 to 18.0 GHz frequency range. Typical
output power of -4 dBm; SSB phase noise of -147 dBc/Hz; output frequency Range of
0.125 to 4.5 GHz; fixed divide ratio: 4 Typ; output power: -7 dBm Min, -4 dBm Typ;
and SSB phase noise (100 kHz Offset) -147 dBc/Hz Typ. This model has SMA female
connectors and a housing measuring 1.250" x 1.250" x 0.563".
 PMI BPM-1840-180-292FF, 18.0 to 40.0 GHz, Bi-Phase
Modulator
PMI Model No.
BPM-1840-180-292FF
is a Bi-Phase Modulator that operates over the 18.0 to 40.0 GHz frequency range.
Typical insertion loss of 8 dB; maximum VSWR of 3.0:1; switching speed 100 ns maximum;
phase variation ±40° typical; amplitude balance ±4.0 dB typical; and power handling
20 dBm operational. This compact housing measures 1.0" x 1.0" x 0.5" and is outfitted
with 2.92 mm female connectors.
About Planar Monolithics Industries (PMI)
Planar Monolithics was founded basically to take advantage of the growing demand
in monolithic-based products using the hybrid MIC/MMIC technology innovations that
are mushrooming in a big way all over the world. High performance and reliable products
can be obtained by using this technology. Planar Monolithics will meet these requirements.
Planar Monolithics organization has been setup to design, develop, manufacture,
test, and market complex state-of-the-art hybrid RF/microwave and monolithic integrated
circuits (MIC/MMIC) and components, and hybrid MIC/MMIC supercomponents and subsystems.
Planar Monolithics provides its unique products for applications in space, military,
communications, telecommunications, commercial, and consumer electronics systems.
Contacts:
Sebastian Palacio Director of Sales & Marketing Principal Applications
Engineer Planar Monolithics Industries, Inc. 7311-F Grove Road Frederick,
Maryland 21704, USA CAGE Code: 05XQ0 Phone: (301) 662-5019 Cell:
(301) 455-9897 E-Mail:
spalacio@pmi-rf.com Website:
www.pmi-rf.com
Posted May 25, 2021
|
