|
Planar Monolithic Industries (PMI), a
leading supplier of custom, high-reliability MIC/MMIC components and subsystems
for applications in space, military, communications, commercial and consumer
electronics systems for more than three decades, recently introduced five new products in their
extensive line of RF and microwave components. Included are a 1 to 20 GHz successive
detection log video amplifier (SDLVA), an integrated microwave filter assembly covering
2 to 6 GHz, a 10 MHz to 18 GHz coaxial power limiter, a 12.8 GHz
phase locked dielectric resonator oscillator (PLDRO), and a 4.4 to 7.8 GHz downconverter
module . Contact PMI today for more information.
 PMI Model No.
SDLVA-1G20G-58-12-SFF,
Successive Detection Log Video Amplifier
PMI Model No. SDLVA-1G20G-58-12-SFF is a 1.0 to 20.0 GHz SDLVA. Excellent
performance is packed into this ultra-small package. Its ultra-wide frequency range
and 59 dB dynamic range makes this part suitable for a multitude of applications.
A key feature is its low power consumption of 1.2 W and a single operating
voltage of +12 V. Supplied in PMI standard PE2 housing (1.08" x 0.71" x 0.29")
that can be used as a SMA connectorized or surface mount component.
 PMI Model No.
PIMA-26-4C-PD2-BPF-L,
Integrated Microwave Filter Assembly
PMI Model No. PIMA-26-4C-PD2-BPF-L is an integrated microwave assembly consisting
of 4 independent channels. Each channel incorporates a 2-way power divider and a
bandpass filter that operates in the 2 to 6 GHz frequency range. Specification
include Insertion Loss of 4.5 dB; VSWR of 2.0:1; Isolation of 15 dB Typ;
Amplitude Balance of ±0.5 dB; Phase Balance of ±5°; Filter Passband of 3.0 to 5.0 GHz;
Filter Rejection of 55 dB; and Passband Flatness of ±1 dB. Housing is 4.0”
X 3.25” X 0.5” and has SMA female connectors.
 PMI Model No.
LM-10M18G-16-20W-AL,
Coaxial Limiter
PMI Model No. LM-10M18G-16-20W-AL is a coaxial limiter with an operating range
of 10 MHz to 18.0 GHz. This model has a maximum insertion loss of 2.0 dB
at -10 dBm input power with a VSWR of 2.0:1 maximum. This compact unit measures
of 0.90" x 0.38" square and is outfitted with SMA connectors.
 PMI Model No.
PIA-12D8G-CD-1,
Phase Locked Dielectric Resonator Oscillator (PLDRO)
PMI Model No. PIA-12D8G-CD-1, Phase Locked, Dielectric Resonator Oscillator has
Internal Reference having an output frequency of 12.8 GHz and provides a minimum
output of +13 dBm with all spurs held to -80 dBc, harmonics held to -25 dBc.
Frequency stability is ±3 ppm with an internal reference of 100 MHz. Unit
measures 2.25" x 2.25" x 0.62" and has SMA Female connectors.
 PMI Model No.
PMIX-4D4G7D8G-1G4D4G-12V,
Down Converter Module
PMI Model No. PMIX-4D4G7D8G-1G4D4G-12V is a 4.4 to 7.8 GHz, Down Converter
Module that has a typical gain of 3 dB; a Max VSWR of 6.5:1; RF Input Power
-15 dBm Typ., -10 dBm Max; LO Input 8.8 GHz; LO Input Power +18 dBm
Typ; IF Output Range 1.0 to 4.4 GHz; Noise Figure 14 dB Max. - Measured
12.93 dB; Harmonics -60 dBc Max; Spurious -60 dBc Max; and Output
IP3 +25 dBm. Unit has SMA male input connectors and a SMPM male output connector
in a housing measured at 2.700" x 1.500" x 0.525".
About Planar Monolithics Industries (PMI)
Planar Monolithics Industries, Inc., was founded by entrepreneurial
technocrat Dr. Ashok (Ash) Gorwara on November 11, 1989. For over three decades,
PMI has been a leading supplier of custom, high-reliability MIC/MMIC components
and subsystems for applications in space, military, communications, commercial
and consumer electronics systems.
Today, PMI with Quantic's leadership, continues to carry on the legacy of its
founder, Dr. Ash by expanding the applications of RF/Microwave components and
subsystems into new, low cost, RF/Microwave receiving and transmitting systems
for both civilian and military customers.
PMI was founded basically to take advantage of the growing demand in
monolithic-based products using the Hybrid MIC/MMIC technology innovations that
are mushrooming in a big way all over the world. High performance and reliable
products can be obtained by using this technology.
A vacuum exists in the demand for state-of-the-art Hybrid MIC/MMIC Components
and Subsystems. Planar Monolithics will meet these requirements.
Contact:
Sebastian Palacio
VP & General Manager
Quantic PMI (Planar Monolithics)
7311-F Grove Road
Frederick, Maryland 21704, USA
CAGE Code: 05XQ0
Phone: (301) 662-5019
Cell: (301) 455-9897
E-Mail:
sales@pmi-rf.com
Website: https://www.pmi-rf.com
Posted February 22, 2022
|
